Denver CRL-330 User manual

Instruction Manual
Clock Radio
CRL-330
www.denver-electronics.com
Before operating this product, please read this instruction manual carefully and completely.

Product Information
EN
EN
Correctly set the stand in specially design for it slot.
Correctly set the stand in specially design for it slot.
-Use USB cable to connect alarm clock to computer
-Use USB cable to connect alarm clock to computer
-Use the adaptor to an electricity network
-Use the adaptor to an electricity network
Use batteries as a backup power source (if the electricity is down, no access
to the network or computer; using the alarm clock in different locations, the
batteries save all your setting)
Use batteries as a backup power source (if the electricity is down, no access
to the network or computer; using the alarm clock in different locations, the
batteries save all your setting)
To install the batteries:
To install the batteries:
Use 2 batteries type AAA (not included).
Use 2 batteries type AAA (not included).

-Open the battery compartment, following the arrow on the battery cover
to remove the cover.
-Open the battery compartment, following the arrow on the battery cover
to remove the cover.
-lnsert 2 AAA batteries, observe the polarity, which can be viewed inside
the compartment.
-lnsert 2 AAA batteries, observe the polarity, which can be viewed inside
the compartment.
-Close the battery cover.
-Close the battery cover.
When the product is running on batteries, they are Function abilities limited:
When the product is running on batteries, they are Function abilities limited:
-Time display will be switched off after 5 seconds. Press any key to switch
on time display.
-Time display will be switched off after 5 seconds. Press any key to switch
on time display.
-Alarm function is available.
-Alarm function is available.
-Radio is available.
-Radio is available.
-All light functions are unavailable in battery mode
-All light functions are unavailable in battery mode

EN
EN
Setting current time
Setting current time
When the power is connected, the hours indication starts to blink
When the power is connected, the hours indication starts to blink
Hours Setting:
Hours Setting:
Use to adjust hour
Use to adjust hour
To confirm press To confirm press
Minute Setting:
Minute Setting:
Use to adjust minute
Use to adjust minute
To confirm press To confirm press
If the indication is stopped touch again. If the indication is stopped touch again.
12H-24H-format
12H-24H-format
Press key to switch the time format between 12H and 24H Press key to switch the time format between 12H and 24H
12H AM or PM will appear on time display.
12H AM or PM will appear on time display.
Changing current time
Changing current time

Touch button Touch button
The hours indication starts to blink.
The hours indication starts to blink.
Hours Setting:
Hours Setting:
Use to adjust hour
Use to adjust hour
To confirm press
To confirm press
Minute Setting:
Minute Setting:
Use to adjust minute.
Use to adjust minute.
To confirm press
To confirm press
If the indication is stopped touch again.
If the indication is stopped touch again.
Intensity of time display
Intensity of time display
Press key to select the display intensity
Press key to select the display intensity
LOW
LOW
HIGH
HIGH
OFF
OFF
Sunrise light simulation
When the alarm time is set, the wake up light will switch on 30 minuts before the alarm time in low brightness and gradually increase the brightness. At the
alarm time the brightness will be full. The natural sound or radio will be played for 2 minuts at the alarm time.
During wake up alarm play
-Touch button to snooze the alarm for 5 minuts. After 5 minuts the alarm will play again for 2 minuts. Press or touch any buttons except to stop
sound.
-- Press and hold to switch off wake up light.

EN
EN
FM Radio
FM Radio
Touch button to turn on/off. Press and hold button for 3 seconds to auto
scan.
Touch button to turn on/off. Press and hold button for 3 seconds to auto
scan.
All available FM channels will be scanned and saved automatically.
All available FM channels will be scanned and saved automatically.
Touch to select an FM station.
Touch to select an FM station.
Press key to choose volume level 1-15.
Press key to choose volume level 1-15.
Note: time display isn’t indicated when Radio is turned on.
Note: time display isn’t indicated when Radio is turned on.
Setting the alarm wake-up time
Setting the alarm wake-up time
Touch button to switch on/off alarm mode.
Touch button to switch on/off alarm mode.
symbol appears/disappears on clock display.
symbol appears/disappears on clock display.
Press and hold button to set alarm. Press and hold button to set alarm.
The hours indication starts to blink.
The hours indication starts to blink.

Hours Setting:
Hours Setting:
Use to adjust hour.
Use to adjust hour.
To confirm press
To confirm press
Minute Setting:
Minute Setting:
Use to adjust minute.
Use to adjust minute.
To confirm press
To confirm press
If the indication is stopped touch again.
If the indication is stopped touch again.
Nature sounds
Nature sounds
Press key to select the alarm sound Press key to select the alarm sound
Use to select 1-7 sounds. Press to confirm selection.
Use to select 1-7 sounds. Press to confirm selection.
Each sound (1-6) will play 5 sec before you choose.
Each sound (1-6) will play 5 sec before you choose.
When 7 is selected the last played radio station will be played as wake up
sound
When 7 is selected the last played radio station will be played as wake up
sound
Press Key to select volume level 00-15 Press Key to select volume level 00-15
EN
EN
Setting the Sunset time
Setting the Sunset time
Touch to switch on/off sunset mode symbol appears/disapears
Touch to switch on/off sunset mode symbol appears/disapears

on time display.
on time display.
Press and hold to set
Press and hold to set
The hours indication starts to set.
The hours indication starts to set.
Hours Setting:
Hours Setting:
Use to adjust hours.To confirm press
Use to adjust hours.To confirm press
minute setting:
minute setting:
Use to adjust minute. To confirm press
Use to adjust minute. To confirm press
Light
Light
Touch to switch on the light
Touch to switch on the light
Use to adjust the level (1-10) of the brightness
Use to adjust the level (1-10) of the brightness
Second touch of will switch on automatic color changing mode
Second touch of will switch on automatic color changing mode
Use to select color: Green, Red, Blue, Purple, Orange, lndigo
Use to select color: Green, Red, Blue, Purple, Orange, lndigo
Third touch to switch off the light
Third touch to switch off the light

Sunset light simulation
30 min before sunset time, the light is turned on with 100% brightness and then the brightness is reduced gradually
and will turn off at sunset time.
During sunset light is turned on you may: Press and hold to turn off the light.
Description
*Led time display in 12H-24 format
*Sunrise wake up light simulation
*Sunset light simulation
*6 Nature sounds to wake up
*Bedside lamp
*White light flux: 73LM
*10 levels of the brightness
*6 coloured light+white light
*Automatic changing of color light
*FM radio with antenna
*15 volume levels
*Touch mode
*Power supply: DC 5V; 2xAAA batteries; USB cable.
Note: When the battery is low the product may not
function properly.
Replace the battery with fresh battery.

EN
EN
Light display
Light display
Time display
Time display
Snooze
Snooze
Current time
Current time
Alarm
Alarm
Down i
Down i
Light
Light
FM
FM
Sunset
Sunset
Up
Up
Nature sounds
Nature sounds
Volume
Volume
Battery compartment
Battery compartment
Stand
Stand
12H-24H format
12H-24H format
Intensity of time display
Intensity of time display