Denver NVI-450 User manual

Digital Night Vision Mononuclar
Operating Manual
Model: DENVER NVI-450
【Contents】
Introduction······························3
Operating Hints···························4
Components Introduction···················5
Operating Instructions······················7
Battery Installation························7
Power On·······························8
Power Off·······························8
Scenery Observation······················9
Brightness Adjustment····················10
Photo Shooting··························13
Playback·······························14
Video Shooting··························16
Monitors Connection·······················17
PCs Connection···························17
Auto Power Off····························17
Power management·························18
Basic Parameters···························19
Configuration Standard······················21
Operating Environment and Announcements·····22
【Name】 Digital Night Vision
【Model】 DENVER NVI-450
【Features】
● It is a night vision monocular which can be used to
observe objects in the dark and low light situation.
Two lighting modes are available to use. The
viewing distance in the low light environment will
be at infinity, 200 meters viewing distance in the
dark environment.
● Easy to exchange data with other instruments，
having USB, AV OUT and DC IN sockets.
● It can be used normally in the day or night, owning
the photo shooting, video shooting, playback and other
functions. 5X fixed zoom and 5X digital zoom.
● It is the best auxiliary tool of extending human’s
visual senses.
【Operating Hints】
● It is a night vision monocular which can be used to
observe objects in the dark and low light situation. Two
lighting modes are available to use.
● It is suitable to use in full dark environment.
● Turn the auxiliary light on to observe the objects
when it works in the dark situation. Adjusting the
brightness by the distance of the objects. CCD is used in
this viewer. If there is any light resource existed, the
auxiliary light could not be turned on, please adjust the
focal distance only to get the sharp image of objects.
● Work time: 1 hour under auxiliary light mode; 1.5
hour without using auxiliary light mode.
Contents
DENVER NVI-450
1
Introduction
DENVER NVI-450
3
Operating Hints
DENVER NVI-450
4
Contents
DENVER NVI-450
2

1 2 3 4 5 6 7 8 9 10 11
1 - Objective Cover
2 - Objective Focusing Wheel
3 - High Beam Light
4 - Socket Door
5 -Micro SD card Slot (Not Incl.)
6 - USB2.0
7 – DC 5V
8 - Tripod Receptacle
9 - Battery Cover
10 - Diopter Ring
11 - Eyecup
12 13 14 15 16 17 18
12 - Hand Grip Strap
13 - Up
14 - Down
15- Functions(for photos shooting, video shooting and
playback)
16 - Auxiliary Lighting/Brightness Adjustment
17 - POWER/FUNCTION
18 - Diopter Dial
【Battery Installation】
● Turn the battery cover
down；insert one battery
correctly (note the
negative electrodes
bottomed) and turn the cover back. Turn the viewer on,
the screen could be lighten up if the battery installed
correctly. Otherwise, please reinstall the battery again or
tighten the cover again.
【Announcements】
Ensure the model of battery should be correct;
Ensure the electric quantity should be full enough;
Pay attention to the anode and the cathode of the battery.
【Power On】
● Take the objective
cover down.
● Long press#17 for 3
seconds to lighten
screen up，observing
from Eyecup(#11)，
if the screen has been lighten up and icons have
been shown normally, the viewer could be used
then
● Icons Instructions：
1 Battery
2 Images Size
3 Current Mode: Photo Shooting Mode
4 SD card in
● The Observing (Photo Shooting) Mode is available
to use after the startup.
【Power Off】
● In any mode, long press #17 for 3 seconds to turn
it off.
Components
DENVER NVI-450
5
Operating Instructions
DENVER NVI-450
7
Operating Instructions
DENVER NVI-450
8
Components
DENVER NVI-450
6
0 3 7 2 7 SD
1 2 3 4

【Scenery Observation】
● Take the objective cover down, observing the
screen from eyecup#11.
1. Adjust the diopter ring #10 until to get the sharp
images
2. Adjust the objective focusing wheel #2 to make the
images to be sharpest and easy to observe then.
● Automatic fine-tuning control of display
brightness could be operated by Viewer.
● Digital zoom could be realized by pressing #13
and #14 ranged at 1x to 5x.
● If the environment is light enough, turn the
auxiliary light off to save the power. On the
contrary, please turn the auxiliary light on to get
the sharpest image to observe
● Otherwise, please turn the auxiliary light on.
【Announcements】
Don’t block the light resource.
【Brightness Adjustment】
 In the observing mode,
press #16.
 Enter the menu of
brightness adjustment. Just as the
screen showed, the number after
“Bright” means the current
brightness index.
 Press #15 to heighten the index and #16 to lower
it. 9 means the highest brightness of display. The index
ranged at 1 to 9, 9 means the brightest index.
【High Beam Adjustment】
In the observing mode, press
#16 twice to enter the high beam
adjustment menu.
The screen will be just as the
picture showed.
The index of LAMP shows the
intensity of auxiliary light.
 Press UP#13, DOWN #14，the high beam will be
changed ranged at 0 to 9(9-highest, 0-off).
 When the high beam function is opened, the menu
is exited, LAMP shows on the screen will be flickered.
【Date and time set up】
Press#16 three times and then press the DOWN #14 you
will come to the time setting surface. Press UP#13, DOWN
#14 to change the numbers and press #17 to select the year,
month or time and save .
【Announcements】
On any mode above, the menu will be disappeared and
went back to observing (photo shooting) mode if there is
any operation within 8 seconds.
Please turn the auxiliary light off if you don’t use it to
save the battery.
SD
Br i ght : 7
LAMP 0
*
Operating Instructions
DENVER NVI-450
9
Operating Instructions
DENVER NVI-450
10
Operating Instructions
DENVER NVI-450
11
Operating Instructions
DENVER NVI-450
12
Brightness Adjustment
High Beam Adjustment
03727 SD
Bri ght : 7
POWLED 0
LED: OFF
*

【Photo Shooting】
 Enter the observing
mode automatically after
the viewer turned on and
in this mode, you could
take the pictures of the
scenery.
Icons Instructions：
1 Battery
2 Images Size
3 Current Mode: Photo Shooting Mode
4 SD card in
 press #17 to shoot a photo and the photo will be
saved automatically in the SD card.
 The image size is based on the surplus capacity of
SD card. The minute difference is available between
the actual image size.
【Playback】
 In the Observing
(Shooting) mode, press
#15 to enter the
Playback function.
 Icons
Instructions(photo)：
1. Battery
2. The serial number
3. Playback mode
4. SD card in
 Icons Instructions(video)：
1. Battery
2. Date
3. Time counting
4. Current serial No.
5. Playback Mode
6. Video Playback
Mode
7. VGA Video Format
8. SD card in
 In the playback mode, press#13 and #14 to view the
photos and videos. The playback order is based on
the shooting mode.
 Identify photos and videos and it will be entered
different menus automatically.
 In the video playback mode, press#17 to start the
video and press again to stop it.
Micro SD card Slot (Not Included)
【Video Shooting】
 In the observing mode, press #17 twice to enter the
video shooting mode.
Icons Instructions：
1. Battery
2. Timing
3. Video Shooting
4. SD card in
 Press #17 to start video shooting.
 The video could be saved in SD card automatically.
 The video size is based on the surplus capacity of SD
card. The minute difference is available between the
actual video size.
0 0 2 7 SD
1 2 3 4
Operating Instructions
DENVER NVI-450
13
0 3 7 2 7 SD
1 2 3 4
Operating Instructions
DENVER NVI-450
14
0027 SD
134 6
00: 02: 25
2012.02.02 09:12:22
VGA
257 8
Operating Instructions
DENVER NVI-450
15
Operating Instructions
DENVER NVI-450
16
1 2 :0 2 :0 2 SD
1 2 3 4
2012.02.02 09:12:22
Photos Playback
Video Playback
Video Shooting

【Monitor Connection】
 Connect monitor to video Output Interface.
 Long press #15 for 3 seconds to switch the display
on the screen of external monitor.
【PCs Connection】
 The viewer is equipped with USB2.0 interface.
 The PC could identify the viewer automatically and
read the content in the SD card.
 The battery could be charged by connection of PCs.
【Auto Power Off】
 The viewer will be turned off if there is not any
operation within 3 minutes except in video shooting
and playback mode.

【Battery Application】
 Model: 14500，800mAh，3.7V.
 Please ensure the battery should be charged 10 hours
to make it works best in the first time.
【External Power】
 Plug the DC IN 5V in.
 The viewer could work for long time and won’t be
powered off automatically.
 The viewer could be charged when the external
power connected well.
【Basic Parameters】
Type Items Index
Optical
Performance
Magnification 5
Dimension of
Objectives φ40mm
Field of View 5°x3.75°
The Range of
Ocular Adjustment
±0.6
Observing
Distance(Low
Light
Environment)
2m～∞
Observing
Distance(Full
Dark Environment)
～200m
Power
Voltage 3.7V DC
Replaceable
Battery
Rechargeable
Battery
Charging
Source 5.0V/2A Adapter
Other
Measurement（L
×W×H） 200ⅹ 86ⅹ 56 mm
Weight 400g
Operating Instructions
DENVER NVI-450
17
Power Management
DENVER NVI-450
18
Basic Parameters
DENVER NVI-450
19
Basic Parameters
DENVER NVI-450
20

【Configuration Standard】
Items Amount
video cable 1
USB cable 1
Pouch 1
External power adapter 1
Operating Manual 1
Hand grip Strap 1
battery 1
Cloths 1
【Operating Environment and Announcements】
The viewer should be kept in the soft pouch. Operating
temperature ranged at -5~40℃. Relative humidity is 80%.
In order to avoid the wetness and mildew, please keep it
in the clear and dry environment. Avoiding the great
pressure and solar radiation also please.
When the image jitter happens or the LCD couldn’t be
lightened up, please charge the battery in time.
Blow away the dusts before wipe the optical surface.
If the viewer won’t be used for a long time, please keep
charge the battery occasionally to avoid the effectiveness
lose.
Please notice - All products are subject to change without any notice.
We take reservations for errors and omissions in the manual
.
ALL RIGHTS RESERVED, COPYRIGHT
DENVER ELECTRONICS A/S
Electric and electronic equipment and included batteries contains
materials, components and substances that can be hazardous to your
health and the environment, if the waste material (discarded electric
and electronic equipment and batteries) is not handled correctly.
Electric and electronic equipment and batteries is marked with the
crossed out trash can symbol, seen below. This symbol signifies that
As the end user it is important that you submit your used batteries to
the approriate and designated facility. In this manner you make sure
that the batteries are recycled in accordance with legislature and will
not harm the environment.
All cities have established collection points, where electric and
electronic equipment and batteries can either be submitted free of
charge at recycling stations and other collection sites, or be collected
from the households. Additional information is available at the
technical department of your city.
Hereby, Inter Sales A/S declares that the radio equipment type
NVI-450 is in compliance with Directive 2014/53/EU. The full text of
the EU declaration of conformity is available at the following internet
address: www.denver-electronics.com and then click the search
ICON on topline of website. Write modelnumber:NVI-450 Now enter
product page, and red directive is found under downloads/other
downloads
Warning Lithium battery inside
DENVER ELECTRONICS A/S
Omega 5A, Soeften
DK-8382 Hinnerup
Denmark
www.facebook.com/denverelectronics
Configuration Standard
DENVER NVI-450
21
22

electric and electronic equipment and batteries should not be disposed
of with other household waste, but should be disposed of separately.