Denver NVI-500 User manual

Digital Night Vision Mononuclar
Operating Manual
Model: DENVER NVI-500
【Contents】
Introduction················ 3
Operating Hints················ 4
Components Introduction················ 5
Operating Instructions················ 7
Battery Installation············ 7
Power On················ 8
Power Off················ 8
Scenery Observation············ 9
Brightness Adjustment········ 10
Photo Shooting················ 13
Playback················ 14
Video Shooting················ 16
Monitors Connection············ 17
PCs Connection··············· 17
Auto Power Off··············· 17
Power management··················· 18
Basic Parameters··················· 19
Configuration Standard················· 21
Operating Environment and Announcements····· 22
【Name】Digital Night Vision
【Model】DENVER NVI-500
【Features】
●It is a night vision monocular which can be used to
observe objects in the dark and low light situation.
Two lighting modes are available to use. The
viewing distance in the low light environment will
be at infinity, 200 meters viewing distance in the
dark environment.
●Easy to exchange data with other instruments，
having USB, AV OUT and DC IN sockets.
●It can be used normally in the day or night, owning
the photo shooting, video shooting, playback and other
functions. 5X fixed zoom and 8X digital zoom.
●It is the best auxiliary tool of extending human’s
visual senses.
【Operating Hints】
●It is a night vision monocular which can be used to
observe objects in the dark and low light situation. Two
lighting modes are available to use.
●It is suitable to use in full dark environment.
●Turn the auxiliary light on to observe the objects
when it works in the dark situation. Adjusting the
brightness by the distance of the objects. CCD is used in
this viewer. If there is any light resource existed, the
auxiliary light could not be turned on, please adjust the
focal distance only to get the sharp image of objects.
●Work time: 1 hour under auxiliary light mode; 1.5
hour without using auxiliary light mode.
Contents
DENVER NVI-500
ENG-1
Introduction
DENVER NVI-500
ENG-3
Operating Hints
DENVER NVI-500
ENG-4
Contents
DENVER NVI-500
ENG-2

1 2 3 4 5 6 7 8 9 10 11
1 - Objective Cover
2 - Objective Focusing Wheel
3 - High Beam Light
4 - Socket Door
5 - DC 5V
6 - USB2.0
7 - Video/Audio Output Connector
8 - Tripod Receptacle
9 - Battery Cover
10 - Diopter Ring
11 - Eyecup
12 13 14 15 16 17 18
12 - Hand Grip Strap
13 - Up
14 - Down
15- Functions(for photos shooting, video shooting and
playback)
16 - Auxiliary Lighting/Brightness Adjustment
17 - POWER/FUNCTION
18 - Diopter Dial
【Battery Installation】
●Turn the battery cover
down ；insert one battery
correctly (note the
negative electrodes
bottomed) and turn the cover back. Turn the viewer on,
the screen could be lighten up if the battery installed
correctly. Otherwise, please reinstall the battery again or
tighten the cover again.
【Announcements】
Ensure the model of battery should be correct;
Ensure the electric quantity should be full enough;
Pay attention to + and – of the battery.
【Power On】
●Take the objective
cover down.
●Long press#19 for 3
seconds to lighten
screen up，observing
from Eyecup(#11)，
if the screen has been lighten up and icons have
been shown normally, the viewer could be used
then
●Icons Instructions：
1Battery
2Images Size
3Current Mode: Photo Shooting Mode
4SD card in
●The Observing (Photo Shooting) Mode is available
to use after the startup.
【Power Off】
●In any mode, long press #17 for 3 seconds to turn
it off.
Components Introduction
DENVER NVI-500
ENG-5
Operating Instructions
DENVER NVI-500
ENG-7
Operating Instructions
DENVER NVI-500
ENG-8
Components Introduction
DENVER NVI-500
ENG-6
03727 SD
1 2 3 4

【Scenery Observation】
●Take the objective cover down, observing the
screen from eyecup#11.
1. Adjust the diopter ring #10 until to get the sharp
images
2. Adjust the objective focusing wheel #2 to make the
images to be sharpest and easy to observe then.
●Automatic fine-tuning control of display
brightness could be operated by Viewer.
●Digital zoom could be realized by pressing #13
and #14 ranged at 1x to 8x.
●If the environment is light enough, turn the
auxiliary light off to save the power. On the
contrary, please turn the auxiliary light on to get
the sharpest image to observe
●Otherwise, please turn the auxiliary light on.
【Announcements】
Don’t block the light resource.
【Brightness Adjustment】
lIn the observing mode,
press #16.
lEnter the menu of
brightness adjustment. Just as the
screen showed, the number after
“Bright” means the current
brightness index.
lPress #15 to heighten the index and #16 to lower
it. 9 means the highest brightness of display. The index
ranged at 1 to 9, 9 means the brightest index.
【High Beam Adjustment】
In the observing mode, press
#16 twice to enter the high beam
adjustment menu.
The screen will be just as the
picture showed.
The index of LAMP shows the
intensity of auxiliary light.
lPress UP#14, DOWN #15，the high beam will be
changed ranged at 0 to 9(9-highest, 0-off).
lWhen the high beam function is opened, the menu
is exited, LAMP shows on the screen will be flickered.
【Announcements】
On any mode above, the menu will be disappeared
and went back to observing (photo shooting) mode if there
is any operation within 8 seconds.
Please turn the auxiliary light off if you don’t use it
to save the battery.
SD
Br i g h t : 7
LAMP 0
*
Operating Instructions
DENVER NVI-500
ENG-9
Operating Instructions
DENVER NVI-500
ENG-10
Operating Instructions
DENVER NVI-500
ENG-11
Operating Instructions
DENVER NVI-500
ENG-12
Brightness Adjustment
High Beam Adjustment
03727 SD
Br i g ht : 7
POWLED 0
LED: OFF
*

【Photo Shooting】
lEnter the observing
mode automatically after
the viewer turned on and
in this mode, you could
take the pictures of the
scenery.
Icons Instructions：
1Battery
2Images Size
3Current Mode: Photo Shooting Mode
4SD card in
lpress #17 to shoot a photo and the photo will be
saved automatically in the SD card.
lThe image size is based on the surplus capacity of
SD card. The minute difference is available between
the actual image size.
【Playback】
lIn the Observing
(Shooting) mode, press
#15 to enter the
Playback function.
lIcons
Instructions(photo)：
1. Battery
2. The serial number
3. Playback mode
4. SD card in
lIcons Instructions(video)：
1. Battery
2. Date
3. Timecounting
4. Current serial No.
5. Playback Mode
6. Video Playback
Mode
7. VGA Video Format
8. SD card in
lIn the playback mode, press#13 and #14 to view the
photos and videos. The playback order is based on
the shooting mode.
lIdentify photos and videos and it will be entered
different menus automatically.
lIn the video playback mode, press#17 to start the
video and press again to stop it.
【Video Shooting】
lIn the observing mode, press #17 twice to enter the
video shooting mode.
Icons Instructions：
1. Battery
2. Timing
3. Video Shooting
4. SD card in
lPress #17 to start video shooting.
lThe video could be saved in SD card automatically.
lThe video size is based on the surplus capacity of SD
card. The minute difference is available between the
actual video size.
0027 SD
1 2 3 4
Operating Instructions
DENVER NVI-500
ENG-13
03727 SD
1 2 3 4
Operating Instructions
DENVER NVI-500
ENG-14
0027 SD
134 6
00: 02: 25
2012.02.02 09:12:22
VGA
257 8
Operating Instructions
DENVER NVI-500
ENG-15
Operating Instructions
DENVER NVI-500
ENG16
12:02:02 SD
1 2 3 4
2012.02.02 09:12:22
Photos Playback
Video Playback
Video Shooting

【Monitor Connection】
฀Connect monitor to video Output Interface.
฀Long press #15 for 3 seconds to switch the display
on the screen of external monitor.
【PCs Connection】
฀The viewer is equipped with USB2.0 interface.
฀The PC could identify the viewer automatically and
read the content in the SD card.
฀The battery could be charged by connection of PCs.
【Auto Power Off】
฀The viewer will be turned off if there is not any
operation within 3 minutes except in video shooting
and playback mode.
฀
【Battery Application】
฀Model: 16340，Lithium battery 750mAh，3.7V。
฀Please ensure the battery should be charged 10 hours
to make it works best in the first time.
【External Power】
฀Plug the DC IN 5V in.
฀The viewer could work for long time and won’t be
powered off automatically.
฀The viewer could be charged when the external
power connected well.
【Announcements】
The standard mobile charging source couldn’t be used
for this viewer.
The battery of viewer is in the state of charging when it is
connected to PCs.
【Basic Parameters】
Type Items Index
Optical
Performance
Magnification 5
Dimension of
Objectives φ40mm
Field of View 5°x3.75°
The Range of
Ocular Adjustment
±0.6
Observing
Distance(Low
Light
Environment)
2m～∞
Observing
Distance(Full
Dark Environment)
～200m
Power
Voltage 3.7V DC
Replaceable
Battery
Rechargeable
Lithium Battery
(750mAh)
Charging
Source 5.0V/2A Adapter
Other
Measurement（L
×W×H）200ⅹ86ⅹ56 mm
Weight 400g
Operating Instructions
DENVER NVI-500
ENG-17
Power Management
DENVER NVI-500
ENG-18
Basic Parameters
DENVER NVI-500
ENG-19
Basic Parameters
DENVER NVI-500
ENG-20

Electric and electronic equipment and batteries is
marked with the crossed out trash can symbol, seen
below. This symbol signifies that electric and electronic
equipment and batteries should not be disposed of with
other household waste, but should be disposed of
separately.
As the end user it is important that you submit your used
batteries to the approriate and designated facility. In this
manner you make sure that the batteries are recycled in
accordance with legislature and will not harm the
environment.
All cities have established collection points, where
electric and electronic equipment and batteries can
either be submitted free of charge at recycling stations
and other collection sites, or be collected from the
households. Additional information is available at the
technical department of your city.
Imported by:
DENVER ELECTRONICS A/S
Stavneagervej 22
DK-8250 Egaa
Denmark
www.facebook.com/denverelectronics
【Operating Environment and Announcements】
฀The viewer should be kept in the soft pouch.
Operating temperature ranged at -5~40℃. Relative
humidity is 80%.
฀In order to avoid the wetness and mildew, please
keep it in the clear and dry environment. Avoiding
the great pressure and solar radiation also please.
฀When the image jitter happens or the LCD couldn’t
be lightened up, please charge the battery in time.
฀Blow away the dusts before wipe the optical surface.
If the viewer won’t be used for a long time, please keep
charge the battery occasionally to avoid the effectiveness
lose.
ALL RIGHTS RESERVED, COPYRIGHT DENVER
ELECTRONICS A/S
Electric and electronic equipment and included
batteries contains materials, components and
substances that can be hazardous to your health
and the environment, if the waste material
(discarded electric and electronic equipment and
batteries) is not handled correctly
DENVER NVI-500
ENG-21