Denver DVBC-110HD Operating and maintenance manual

110
Instructional Manual
Betjeningsvejledning
Använderinstruktioner
Benutzerhandbuch works for
Yousee,
Stofa + more

Important safety instructions to be kept with the product
Please read attentively
To prevent fire and electric shock, do not expose this receiver to
rain or moisture. In order to avoid any possible risk of electric shock,
never attempt to open the unit. In case of breakdown, reparation should
be made by qualified technicians. No part of this unit should be
re
p
aired b
y
users.
WARNING!
Presence of dangerous tension inside apparatus! Do not open. Risk of electric
shock! No part should be repaired by users. The maintenance of the receiver
should be carried out exclusively by qualified persons.
If the power cord is damaged, it must be replaced or repaired by the manufacturer, its
after-sales service, qualified electrician or persons of similar qualification in order to avoid
possible danger.
The product must be installed in accordance with national regulations.
The used batteries must be disposed of safely. Throw them in collection bins provided is
prohibited (inquire after your retailer for more details) in order to protect the environment.
Proper Installation
- Place the receiver on a flat, firm and stable surface. Do not put it on a carpet or rug.
- Do not place the receiver on top of another device, such as an amplifier. This may lead to
overheating.
- Do not put anything above the unit (for example, CDs or magazines).
Sufficient Ventilation
- Place the receiver in a well-ventilated location to prevent accumulation of internal heat.
Allow a gap of at least 10cm to the rear and the top of the unit, as well as a space of 5cm
to both sides to avoid overheating.
- Do not obstruct any ventilation openings with items such as newspapers, tablecloths,
curtains, etc.
Protecting the Receiver from High Temperatures, Humidity, Water and Dust
- The receiver should not be exposed to dripping water or splashing.
- No objects filled with liquids, such as vases, shall be placed on the unit.
- Do not place any objects that might damage your unit near it (e.g. liquid filled objects or
candles).
- Do not place any source of flames such as lit candles on the receiver.
- This receiver is to be used in a temperate climate and should not be used in a tropical
climate.
Electricity Supply
- Please unplug the receiver in case of prolonged non-use.
- If the power cord is damaged, it must be replaced or repaired by the manufacturer, its
after-sales service, qualified electrician or similar qualifications to those to avoid possible
danger.

- This device must be connected to a 230V ~ 50Hz electrical network.
- The plug must remain readily accessible after the installation of the product.
Welcome Section
Congratulations on choosing to buy a DENVER product. By doing so you now have the
assurance and peace of mind that comes with purchasing a product made by one of the
leading manufactory.
Main features
ġ
zSlim size (180mm)
zMPEG-2, MPEG-4(H.264) decoding
zUSB2.0 for software update , music ,image, movie and recording
zLCN(Logical Channel Number) supported;
zParental control
zFavorite lists
zTimer
zEPG/TXT/SUBTITLE supported
zDigital sound through COAXIAL output (S/PDIF)
zPVR ready supported
Automatic Standby: the STB preset to automatically switch from active mode into
standby if 3 hours no interaction and/or channel change from user, with alert message 2
minutes before going into standby. User can choose OFF (turn off this function) or other
hours.

FAQ – DENVER DVB-C
Congratulations with your digital cable-tv tuner. With this settop box you can enjoy digital TV signal, and get HD channels in full
quality.
To get a proper signal you need good cables with proper connectors and assembling. If you don’t have this, it can be hard to receive
proper signal.
This is why it is important to check your cables. Bad assembling and bad quality of assemblings can do so that you don’t get signal at
all, or in best case pixelating channels.
Check your cables.
If possible, the DVB-C box shall be connected directly to the input connector of the house. And you should maximum use 10 meter
cables. If you put more cables in a row (with connectors), you risk to loose a lot of signal, so use one long cable instead of several
with connectors.
It is also important to use double shielded cables, and preferrable of the type with mounted connectors.
xIf you need to split the signal to more than one tv, it is best to do this after the box is connected. OR best of all use a
connector box with F-connectors. And not the T-pieces that you use as normal antenna plug.
F-Connector looks like this:
xPlease make sure not to make sharp turns on the cable. You risk to damage the inside of the cable this way.
If you follow these rules, you will get digital cable tv in super quality.
Please notice that in some houses it might be necessary to use a signal amplifier. If you use this, make sure it is made for digital cable
tv, and has the proper shielding. It might be a good idea to ask you tv provider what amplifier they suggest.

1. Installation of STB....................................................................................................... 2
1.1 Front Panel....................................................................................................... 2
1.2 Rear Panel........................................................................................................ 2
1.3 Connection ....................................................................................................... 3
1.4 Remote............................................................................................................. 4
2. Installation Guide........................................................................................................ 5
3. Basic Operation........................................................................................................... 5
3.1 Program Organizer ........................................................................................... 5
3.2 Installation Guide.............................................................................................. 6
3.3 System Setup ................................................................................................... 6
3.4 Tools................................................................................................................. 8
3.5 Timers .............................................................................................................. 8
3.6 Record.............................................................................................................. 8
3.7 MutiMeida......................................................................................................... 9
3.7 Audio key.......................................................................................................... 9
3.8 TV Channel and radio Channel list ................................................................... 9
4. Other functions introduction...................................................................................... 9
4.1 Program information ......................................................................................... 9
4.2 Favorite List.................................................................................................... 10
4.3 EPG (Electronic program guide)..................................................................... 10
5. Troubleshooting........................................................................................................ 10

2
1. Installation of STB
1.1 Front Panel
1Power: Switch between Standby mode and active mode.
2on/off:Power lamp, red color in Standby mode, green color in active mode
3IR sensor: Receives the remote control signal.
1.2 Rear Panel
1. ANT IN
Connect cable signal.
2. LOOP OUT
Connect to TV.
3. USB
It is used for playing wma,m4a, aac, JPEG,BMP,PNG,AVI, XVID,MKV and USB
PVR(USB stickers, mobile HDD with external power supply and FAT32 format).
USB harddisc on products with PVR function:
Please notice that we recommend using a hard disc with OWN power supply on this
unit. This is to ensure that it has enough power to work properly.
You can buy many hard discs without power supply, but our experience is that they
need too much power to work stable. MAXIMUM power for hard discs without power
supply is 500mAh.. If they use more than this, they will fail when recording.
4. HDMI
Connecting to the HDMI input on the TV set.
5. S/PDIF
Digital audio signal output, It is Coaxial output
6.TV SCART Connector
Connect your receiver to your TV Scart port using a SCART cable.
7. Power Cord

3
1.3 Connection
Note: Before connect this STB to other devices, please close all devices’ power.
1.3.1 Connecting to cable signal
To receive the broadcast signal, the cable signal should be connected to the CABLE IN
connector at the back of the receiver.
1.3.2 Connecting to TV
1. Connect the HDMI connector of the receiver to the HDMI connector of TV set.
2. Connect the TV Scart connector of the receiver to the Scart connector of TV set.
1.3.3 Connecting to Digital Audio Amplifier
Connect S/PDIF( COAXIAL) connector of your receiver to digital audio input of your
amplifier.

4
1.4 Remote
:Switch between operation and standby modes.
:Press to temporarily cut off the sound.
0-9: Enter number or select a channel number to watch.
RCL: Switches to Last channel viewed.
TV/R: Switch between TV and Radio mode.
MENU: Displays the main menu.
AV:switch AV and TV mode
EXIT: Return to the previous menu or escape from the item
OK: Confirm.
: Move cursor up/down/left/right, page up/down,
Volume +/-.Chanel +/-
FAV: Press to display the TV favorite list.
EPG: Shows the EPG (Electronic Program Guide) only
when menu is off.
V+/V-: Volume+/-.
AUDIO: Display the Audio Select window.
INFO: Shows information of the current channel.
:Direct entrance to list of recorded programs; timeshift ;
Play in multimedia playback
ZOOM: Zoom the piture in media player; under menu of
Music, Movie, PVR, press Zoom button, show GOTO on
menu, then input time which you want.
P+/P-: Page up or down in menu list.
PAUSE: Pause in multimedia playback & timeshift
SUB: Show the list of subtitled languages the current.
channel supports.
TEXT: Shows current service’s Teletext on OSD.
REC: Records a live program.
:
Slow playing.
:
Fast playing.
Ŷ˖
Stop.
Colored buttons (RED, GREEN, YELLOW, BLUE): special function keys, there is function
description in menu bottom side, different functions in different menu option.

5
2. Installation Guide
After all connections have been made
properly, switch on TV and make sure the
receiver is connected to the Main Power.
Press Power button to switch receiver on. If
you are using the receiver for the first time or
restored to Factory Default, the Main Menu
will appear on your TV screen.
(1) select [Country] and press
RIGHT/LEFT key to select an country to
determine the time region.
(2) Select [OSD Language] and press RIGHT/LEFT key to select an language
(3) select [Display mode] and press RIGHT/LEFT key to select an resolution
(4) select [Aspect Mode] and press RIGHT/LEFT key to set the display format.
(5) Select [Channel Search] and press RIGHT or OK key to begin Automatic channel
search
(6) Once channel tuning is complete, you are now ready to watch TV
3. Basic Operation
3.1 Program Organizer
To access the Menu, press the MENU
button and select [Program organizer]. The
Menu provides options to adjust the Program
Manage Settings. Press the EXIT button to
exit the Menu.
3.1.1 Channel Manager
To edit your program preferences (lock,
skip, favourite, move or delete), you will need to enter the Program Edit Menu. This Menu
requires a password to access. Enter the default password '0000'.
3.1.2 Channel sort
1. Sort your channels from the following options:
[LCN] - Sort the channels in ascending order
[ONID]-Sort the channels according to the original network
[Service Name] - Sort the channels in alphabetical order
[Service ID] - Sort the channels according to the station
2. LCN (Logical channel number)
Set LCN on or off.
3.1.3 Delete All Channel
Delete All channel by enter password “ 0000”

6
3.2 Installation Guide
To access the menu, press MENU and
select [Install Guide]. The Menu provides
options to adjust the Channel Search settings.
Select an option and press OK or RIGHT
tothe setting page.Press EXIT to exit the
Menu.
3.2.1 Search Setup
(1) Country:Setup an country that it
determine the time region.
(2)Standby Loop Through :You can select Standby Loop Through On or Off.
3.2.2 Auto Search
Search and install all channels automatically. This option overwrites all preset
channels.
1. Input the symbol.
2. Press LEFT or RIGHT key to select QAM and search mode.
3. Press OK to start searching channels
3.2.3 Manual Search
Install new channels manually. This option adds new channels without changing the
current channels list.
1. Select [Manual Search] then press OK or RIGHT. The channel search screen will
appear.
2. Input the frequency and symbol.
3. Press LEFT or RIGHT key to select QAM and search mode.
4. Press OK to start searching channels
If a channel is found, it is saved and added to the channels list. If channels can t be
found, and then exit the menu.
3.2.4 Net Work Search
You can search channels by net work. Input the local Network ID which your program
provider provides.
3.3 System Setup
To access the menu, press MENU and
select [System setup]. The menu provides
options to adjust the system settings.
Press the UP/DOWN key to select an
option and press OK to enter the setting
page.
Press EXIT to exit the Menu.
3.3.1 Language Setting
You can set menu language that was the OSD language.
You can set the audio language that was the default choice when the program

7
has multi-audio.
You can set the subtitle language that was the default choice when the program
has multi-subtitle
3.3.2 OSD setting
You can set the OSD transparent and infobar show time.
3.3.3 TV Setting
(1) TV mode
If the video does not appear correctly, you need to change the settings.
This should match the most common setting for TVs in your country.
[NTSC]: for NTSC system TV.
[PAL]: for PAL system TV.
(2) Screen Mode
You must set the display format to either4:3 Full, 4:3 Pan& Scan, 4:3 Letter
Box, 16:9 Wide Screen or Auto to get the maximum display when watching TV.
(3). Scart Output
You can set the video output mode.
(4). HDMI output
If the video does not appear correctly, change the setting. This setting is to
match the most common setting for HDMI.
[576i]: for PAL system TV.
[576P]: for PAL system TV.
[720P]: for NTSC or PAL system TV.
[1080I]: for NTSC or PAL system TV.
3.3.4 Audio Setting
It control the Digital Audio Amplifier output.
3.3.5 Time Setting
This menu provides options to adjust the time settings.
Press UP/DOWN to select an option and press RIGHT/LEFT to adjust the setting.
Press EXIT to exit the menu.
(1) Time offset
Select auto or manual for GMT offset adjustments.
(2) Region
It indicate the setup country capital. It would not be changed in this menu.
(3) Time Zone
Select the Time Zone Offset when [Time Offset] is set to Manual.
3.3.6 Auto Standby
Select the Sleep time.
The machine will automatic switch off after 3 hours without user activity.
3.3.7 Parental Guidance
You can restrict access to channels that are unsuitable for children. To restrict/lock
the channel you will need to enter either the default password '0000' or your own

8
password.
3.3.8 Restore Factory Default
Reset your Set Top Box to the Default Factory Settings.
In Main Menu select [Restore Factory Default] and press OK or RIGHT to select.
Enter your password or the default password '0000' and press OK to confirm. This option
will delete all preset channels and settings.
3.4 Tools
To access the menu, press MENU and
select [Tools]. The menu provides options to
adjust the system settings.
Press the UP/DOWN key to select an
option and press OK to enter the setting
page.
Press EXIT to exit the Menu.
(1) Information
View model, hardware and software
information.
(2) Change Password
Set or change the password for locked programs. Enter your old password or the
default password '0000'. You will then be asked to enter your new password. To confirm
re-enter your new password. Once it is confirmed, press EXIT to exit the Menu.
(3) USB Upgrade
It support the upgrade the software when choose the right file which the manufacture
provide .
(4) Remove USB device
Remove the USB device safely.
3.5 Timers
In this menu, you can select the channel
number which you want to record, set the
start date, start time, end time and select the
repeat mode(Once, Daily or Weekly), then
set the mode to Record, press Ok to save the
timer. This channel will be recorded
3.6 Record
This menu contains video list ,USB
device information ,Record setup
and remove USB device (the the usb
device is interted,this option would
be appear)
Video list: you can see PVR.
USB device information :You can
format the usb device to FAT32 or
NTFS

9
Record setup: you can view record
device information.
3.7 MutiMeida
You can play music, view the photo, see
the movie
Multimedia player feature also has been
integrated on the receiver. You could show
your preference photo, playing music and
movie on multimedia player. Known
supported file were illustration below. NTFS,
FAT32 and FAT16 file system could be
supported at the moment.
Player Supported file
Photo JPEG, BMP, PNG
Music *.wma, *.m4a, *.aac
Movie *.AVI, *.MKV, *.XviD, *.mpeg, *.dat, *.vob, *.ts, *.mp4(GMC not
supported), *.motion JPEG
Photo Configure
You can set Slide Time, Slide Mode and Aspect Ration
Movie Configure
In this menu, you can set Subtitle Specific, Subtitle BG and Subtitle Fontcolor..
3.7 Audio key
The program might have multilingual audio language and the audio broadcast on
different audio mode such as Stereo, Left or Right. All the available audio languages will
display on the audio track windows while you press AUDIO key. The screenshot is
illustrated below. If there is no audio output after you select the audio language, it
indicates that there is no audio on the current audio mode, so you have to select
preferable audio mode.
3.8 TV Channel and radio Channel list
Press OK key to display all TV channel or all Radio channel. Follow the help information at
the bottom of the window to select preference channel.
4. Other functions introduction
4.1 Program information
If you press the INFO button once, a banner is displayed on the upper part of the screen,
and if you press the button again before the upper banner is disappeared, the banner will
show the details of the currents channel.

10
4.2 Favorite List
If you press “FAV” on the remote controller at No menu state, the favorite group list will be
displayed on the screen. You can select one favorite group and press “OK” key to enter
the favorite channel list
4.3 EPG (Electronic program guide)
The EPG is an on-screen TV guide that
shows scheduled programs seven days in
advance for every tuned channel. Press the
EPG button on the Remote Control to access
guide.
When entering EPG for the first time
on a channel it can take up to 2 minutes
before EPG is fully shown. If you change
channels, the 2-minute loading time can
be starting over again. This is not an
error, but a normal waiting time for the
EPG to load”.
You can use the UP/DOWN key to select the preferred program and press color key
to change time that view event. Press “OK” key, you can view or record program by timer
5. Troubleshooting
There may be various reasons for the abnormal operation of the receiver. Check the
receiver according to the procedures shown below. If the receiver does not work properly
after checking it, please contact the dealer. Don’t open the receiver cover. This may cause
a dangerous situation.
Symptom Cause Remedy
The LED display
on front panel does
not light up.
The power cord is not
plugged in.
Check that the power cord is
plugged in to the wall outlet.
No picture or
sound
Wrong connection of
the Audio/ Video
output of the receiver
to TV. Audio muting.
TV power off.
Connect the Audio/ Video output
of the receiver to TV correctly.
Press the MUTE button Turn TV
on.
No picture The receiver can’t
receive the signal
Incorrect values of
some tuner
parameters Wrong
direction of the
antenna.
Check the antenna cable, replace
the cable, or connect the cable to
the receiver tightly. Set the values
of the tuner parameters correctly
in the installation menu. Check the
antenna connect.
The remote control
does not work
The batteries of the
remote control are not
inserted or exhausted
Check whether the batteries are
inserted correctly in your remote
control. Check the batteries, and if
exhausted replace the batteries in
the remote control.

11
Tips If you refer to this troubleshooting, but no resolve that problem you encountered. Please
you contact the local dealer or technical support instantly, don’t to discover the machine, because
that do is very danger, and it damage that machine in that cases.
Electric and electronic equipment and included batteries contains
materials, components and substances that can be hazardous to your
health and the environment, if the waste material (discarded electric
and electronic equipment and batteries) is not handled correctly.
Electric and electronic equipment and batteries is marked with the
crossed out trash can symbol, seen below. This symbol signifies that
electric and electronic equipment and batteries should not be disposed of with other
household waste, but should be disposed of separately.
As the end user it is important that you submit your used batteries to the appropriate
and designated facility. In this manner you make sure that the batteries are recycled
in accordance with legislature and will not harm the environment.
All cities have established collection points, where electric and electronic equipment
and batteries can either be submitted free of charge at recycling stations and other
collection sites, or be collected from the households. Additional information is
available at the technical department of your city.
ALL RIGHTS RESERVED
COPYRIGHT DENVER ELECTRONICS A/S
WWW.DENVER-ELECTRONICS.COM
Importer:
DENVER ELECTRONICS A/S
Stavneagervej 22
DK-8250 Egaa,Aarhus
Denmark
www.facebook.com/denverelectronics

MED ENSAMRÄTT UPPHOVSRÄTT DENVER ELECTRONICS A/S
ALLE RECHTE VORBEHALTEN URHEBERRECHTE DENVER ELECTRONICS A/S