
Montage und Installationsschritte
Using Steps
1. Open the clamp arm on either side and put in
the phone. (You can rotate 180° with clamp arm
to avoid the interference of the clamp arm on
the keys of the mobile phone).
2. Put the silicone straps on the four corners of the
mobile phone to ensure the mobile phone is
firmly clamped and can be used normally.
3. After use, remove the straps at the four corners
and pull up to remove the phone.
Note: This product comes with a spare silicone strap. If
the silicone strap of the mobile phone clip is damaged
afte long-term use, please put the spare silicone strap
on the round hole on the back of the phone clip as
shown in the figure, and then press the bracket.
①Put it on the ball first
②Push to the back of the phone clip