DESIGN CONCEPTS 8000 User manual

MODEL 8000
COUNTER/TIMER
OPERATOR’S MANUAL
DESIGN CONCEPTS, INC.
707 N. Lindenwood
Olathe, Kansas 66062
PHONE : [phone]
FAX : [phone]
E-MAIL : [e-mail]

Series 8000 Terminal Designation February-2003
J1 Connector J 2 Connector
Installed only with 01 & 02 Options
Pin RS232 Function
Option -01 RS422 Function Option –02
1 Logic Common
2 Transmit Data Transmit Data High
3 Receive Data Receive Data Low
4 Ready to Send Ready to Send High
5 Clear to Send Clear to Send Low
6 Logic Common
7 Logic Common
8
9
10
11
12
13
14 Transmit Data Low
15 Receive Data High
16 Request to Send Low
17 Clear to Send High
18
19 Logic Common
20
21
22 Logic Common
23
24
25
Function PIN
PIN
Function
High Speed Start
A 1 Remote Reset
High Speed Reset
B 2 High Speed Stop
High, zero crossing input
Option -08 only C 3 Model Select Input
(Option -11) Differential
Receive Input “B” (-) D 4 High, non zero crossing input Option -08 only
Quadrature Input “B”, Or
TTL down count input “B”,
Or (Option -11) Differential
Receive Input “B” (+)
E 5 Remote Start
Limit 2 Output F 6 Remote Stop
H 7 115VAC
Option -12 & -24 (+input)
Option - 22 (230VAC)
J 8 NC
K 9 115VAC
Option -12 & -24 (Supply
return)
Option - 22 (230VAC)
Quadrature Input “A”, Or
TTL Up Count Input “A”,
Or (Option -11) Differential
Receive Input “A” (+), Or
Single count input
L 10 Limit 4 Output
(Option -11) Differential
Receive Input “A” (-) M 11 Spare Output
Limit 3 Output N 12 Z Input (Model 8033 Only)
Logic Common P 13 Logic Common
Logic Common R 14 Logic Common
Limit 1 Output S 15 + 5 VDC