Nautilus Hyosung MX8200QT User manual

Operator Manual
MX8200QT System
V01.00.01 (2015. 1.22)
© 2014 Nautilus Hyosung Inc. All Rights Reserved.

© 2014 Nautilus Hyosung Inc. All Rights Reserved. I
Revision History
Operator Manual - MX8200QT System
No.
Version
Date
Description of Change
Chapter
1
V01.00.00
2014/09/18
New Publication
All
1
V01.00.01
2015/01/22
Changed the exterior images of MX8200QT
Cover, 2
© 2014 Nautilus Hyosung All Rights Reserved.
The content of this specification is protected by copyright laws.
2015. 1. 22. 2nd Release

II © 2014 Nautilus Hyosung Inc. All Rights Reserved.
Contents
Chapter1. Preface...........................................................................................................................1-1
Purpose ........................................................................................................................................................1-1
Audience.......................................................................................................................................................1-1
Support Information......................................................................................................................................1-1
What is in This Manual.................................................................................................................................1-1
Conventions..................................................................................................................................................1-2
Safety Precautions .......................................................................................................................................1-4
Related Document ........................................................................................................................................1-6
Chapter2. Introduction ...................................................................................................................2-1
About the MX8200QT...................................................................................................................................2-1
The Exterior Overview..................................................................................................................................2-2
The Interior Overview...................................................................................................................................2-3
Basic Features..............................................................................................................................................2-4
Devices of MX8200QT .................................................................................................................................2-8
Customer Display & Keypad·······························································································2-8
Teller display···················································································································2-9
Card Reader················································································································· 2-10
CE (Control Electronics, PC)···························································································· 2-11
Power Supply ··············································································································· 2-12
Cash & Check In Module (CCIM) ······················································································ 2-13
BRM (Bill Recycling Module)···························································································· 2-14
SPR (Slip Printer/Receipt Printer)······················································································ 2-15
Coin Dispenser ············································································································· 2-16
Contactless Card Reader (CCR) ······················································································· 2-17
Seismic Sensor and Heat Detector ···················································································· 2-18
Chapter3. For the beginning operator...........................................................................................3-1
Opening and Closing the Exterior Door........................................................................................................3-1
Side Car Opening ············································································································3-1
Side Car Closing ·············································································································3-3
Upper Front Opening········································································································3-4
Upper Front Closing ·········································································································3-5
Security Enclosure Opening·······························································································3-6
Security Enclosure Closing ································································································3-7
Switching Power On/Off ...............................................................................................................................3-8
Switching Power On·········································································································3-8
Switching Power Off·········································································································3-9
Power Supply Status ······································································································ 3-10
Opening/Closing the Security Enclosure (Security Door) .......................................................................... 3-11
Chapter4. Cash & Check In Module (CCIM_CHECKONLY) ..........................................................4-1
Basic Specification of Cash & Check In Module (CHECKONLY).................................................................4-3
Specification of External Appearance ..........................................................................................................4-4
Cash & Check Conditions ............................................................................................................................4-5
Acceptable condition ········································································································4-5
Unacceptable condition·····································································································4-6
How to remove jam from each section.......................................................................................................4-10
Remove jam from Bundle Module······················································································ 4-12
Remove jam from the First Transport Path ·········································································· 4-13
Remove jam from BC ····································································································· 4-14
Remove jam from ALG···································································································· 4-15
Remove jam from Recog Transport Section········································································· 4-16
Remove jam from the B2 Upper Transport Path of BM2 ························································· 4-17
Remove jam from the B2 Upper Transport Path of BM2 ························································· 4-18

© 2014 Nautilus Hyosung Inc. All Rights Reserved. III
Remove jam from B2 Reject Transport Section ·····································································4-19
Remove jam from B3 Transport Section ··············································································4-20
Remove jam from Reject Section·······················································································4-21
Remove jam from B3 Escrow Transport Section····································································4-22
Remove jam from B4 Transport Section ··············································································4-23
Remove jam from Escrow ································································································4-24
Remove jam from RT/A6 Cassette ·····················································································4-25
Remove jam from Cassette ······························································································4-27
How to change PRT Maintenance Module.................................................................................................4-29
How to replace Ink cartridge ·····························································································4-29
How to reset PRT Cartridge Count ·····················································································4-30
How to replace Ink Head Cleaner Felt·················································································4-31
Chapter5. Bill Recycling Module (BRM)........................................................................................5-1
Basic Specification of Bill Recycling Module................................................................................................5-2
Bill Conditions...............................................................................................................................................5-4
Acceptable condition········································································································ 5-4
Unacceptable condition····································································································· 5-5
How to open and close the lower unit ..........................................................................................................5-9
How to replenish the cassette with bills...................................................................................................... 5-11
How to remove the bills from reject cassette..............................................................................................5-16
How to remove the bills from utility cassette..............................................................................................5-19
How to open and close the upper unit........................................................................................................5-21
How to open and close the upper body of the module...............................................................................5-24
How to remove the jam...............................................................................................................................5-25
Chapter6. Receipt Printer...............................................................................................................6-1
Receipt Paper...............................................................................................................................................6-1
Specifications ················································································································· 6-1
Paper Handling Precautions ······························································································ 6-1
How to load the receipt paper.......................................................................................................................6-2
How to clear receipt jam from the Printer.....................................................................................................6-5
Chapter7. Coin Dispenser..............................................................................................................7-1
Replenishing the Coin Dispenser.................................................................................................................7-1
Clearing a coin jam.......................................................................................................................................7-3
Notes.......................................................................................................................................Notes-1

Operator Manual Chapter1. Preface
© 2014 Nautilus Hyosung Inc. All Rights Reserved. 1-1
Chapter1. Preface
Purpose
▶This manual is produced to describe how the customers operate Nautilus Hyosung’s
MX8200QT.
This manual details how the customers replenish the notes, paper and coins and how
they remove the jam at the MX8200QT.
Audience
▶Customers and staffs of Nautilus Hyosung who use and operate the MX8200QT in
each branches of bank.
Support Information
▶If any question or error occurs while operating MX8200QT in compliance with this
manual, please contact maintenance staffs of Nautilus Hyosung.
For the contact of maintenance staffs of Nautilus Hyosung, see the E-mail addresses
and telephone numbers provided separately.
What is in This Manual
▶This manual is designed to provide the operation guide for the MX8200QT and the
detailed description of the following:
▪Replenishing the notes, the receipt paper and the coins
▪Emptying the notes and the checks
▪Removing the jam like the notes, the checks, the receipt paper and the coins
▶All information described in this manual is a licensed product of Nautilus Hyosung.
Some of the information in this manual may differ according to the network processor to
be connected and may be subsequently updated by the bank’s needs or the improvement
by Nautilus Hyosung.
It is the policy of Nautilus Hyosung to improve products as new technology, components,
software, and firmware become available. Therefore Nautilus Hyosung reserves the right
to change specifications without notice.

Chapter1. Preface Operator Manual
1-2 © 2014 Nautilus Hyosung Inc. All Rights Reserved.
Conventions
▶Terminologies
In this document the terminology listed below is used as follows:
▪Customer and consumer refer to any person who transacts business through the
ATM.
▪Device and unit refer to the standard and optional ATM equipment, such as monitor,
card reader, printer and dispenser.
▪Fascia refers to the entire front portion of the unit, including the portion where the
customer transacts business.
▪Module refers to a plug-in device that can be serviced or replaced.
▪Note(s) and bill(s) refer to the individual documents loaded into and dispensed from
the dispenser.
▪Servicing and maintenance refer to the supervisor, operator and technician’s tasks
performed to keep the ATM operational.
▪Screen refers to the text appearing on the customer display.
▶In this document the abbreviations listed below is used as follows:
#
Abbreviations
Description
1
AD board
Analog to Digital conversion board
2
ADA
The American Disabilities Act
3
ALG
Alignment Module
4
AP
Application Program
5
Assy
Assembly
6
BATT S/W
Battery Switch
7
BC
Bill Checker
8
BM1
Body Module1
9
BM2
Body Module2
10
BM3
Body Module3
11
BMD
Body Module-Down (Lower Body of the Module)
12
BMU
Body Module-Up (Upper Body of the Module)
13
BUNDLE
Bulk Note Separation Module
14
BRM
Bill Recycling Module
15
CAM
Camera Unit
16
CASSETTE
Cash & Check Cassette
17
CCIM
Cash & Check In Module
18
CCR
Contactless Card Reader
19
CE
Control Electronics
20
CSM
Customer Service Module
21
DPC
Deposit Cassette
22
Earphone Jack
Voice Converter for Visually Disabled Persons (ADA)

Operator Manual Chapter1. Preface
© 2014 Nautilus Hyosung Inc. All Rights Reserved. 1-3
#
Abbreviations
Description
23
EMV
Europay, Mastercard, Visa
24
EP
Elementary Program
25
EPP
Encryption PIN Pad
26
Escrow
Escrow Module
27
FELT
Ink Head Cleaner Felt
28
H/W
Hardware
29
I/F
Interface
30
ISO
International Standard Organization
31
JPR
Journal Printer
32
LCD
Liquid Crystal Display
33
MCU
Magnetic Card Unit
34
OPL
Operation Panel for Customers to Operate
35
OSD board
On Screen Display Board
36
P/S
Power Supply
37
PIN
Personal Identification Number
38
PNC
Panel Control Board
39
PRT
Endorsement Module
40
PTR
Printer (mainly Receipt Printer)
41
RC
Recycle Cassette
42
RECOG
Recognition Module
43
REJECT
Reject Module
44
RJC
Reject Cassette
45
RT/A6
Retract & A6 Cassette
46
S/W
Switch
47
SCM
Separator Control Module
48
SIU
Sensor and Indications Unit
49
SP
Service Provider
50
SPR
Slip Printer (Receipt Printer)
51
TE
Tape Escrow
52
TTU
Text Terminal Unit (OPL or SPL)
53
UTC
Utility Cassette
54
VFD
Vacuum Fluorescent Display

Chapter1. Preface Operator Manual
1-4 © 2014 Nautilus Hyosung Inc. All Rights Reserved.
Safety Precautions
▶Common Safety Precaution
Safety Precautions in outlined this manual provide information
on safe and proper handling of the product. Non-compliance of
the safety precautions may result in injury or damage to the
product.
This precaution symbol with sample term tells you safety
warnings during equipment handlings.
▶Please read the following instructions before operating equipment.
▪Operate equipment in the order outlined in this manual.
▪Follow precautions indicated in this manual, as well as the equipment itself.
Failure to properly address these precautions may lead to injury or damage to the
product.
▪Avoid operations not addressed in this manual.
▪If you cannot remedy system problems using the methods outlined in this manual,
please refer to contact information listed in the manual.
▪Any change or modifications in construction of this device which are not expressly
approved by the party responsible for compliance could void the user’s authority to
operate the equipment.
<Note!>
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his own expense.
▶CAUTION
1. To reduce the risk of fire, use only No. 26 AWG OR LARGER Telecommunication
cord
2. Risk of explosion if battery is replaced by an incorrect type.
Dispose used batteries according to the instructions.
3. For pluggable equipment, the socket-outlet shall be installed near the equipment and
shall be easily accessible.
4. The equipment is to be secured to he building structure before operation
5. A security container shall be permitted to optionally be provided with a secondary
lock, but improper use of the secondary lock feature will reduce the security level of
the ATM.

Operator Manual Chapter1. Preface
© 2014 Nautilus Hyosung Inc. All Rights Reserved. 1-5
▶Description of Precaution Symbols
Symbol
Description
Electrical Shock Warning
▪Do not remove cover. Only a maintenance engineer is allowed
to open the cover.
▪Do not touch. You may receive electric shock.
▪Make sure to turn off the power when servicing the equipment.
High Temperature Warning
▪Do not touch the equipment when it is running.
▪The equipment can get extremely hot and may cause a burn.
▪Make sure to close the cover beore running the equipment.
Use Precaution when Moving
▪The equipment is heavy. Make sure at least 2 people lift or
move the equipment.
▪Do not attempt to move the equipment alone. You may be
injured from dropping the heavy equipment.
Fire Hazard
▪Place the equipment in an area away from any combustible
materials.
▪The equipment may catch on fire from overheating or short
circuit of the power supply unit.
Disassembly Warnings
▪Do not disassemble or modify the equipment unless you are a
certified engineer.
▪Contact the service center for maintenance, adjustments and
repairs.
▪Improper disassembly may cause fire or electrical shock.
Collapse Precautions
▪Do not place the equipment where the floor cannot sustain the
weight of the equipment, or on slanted or unstable surface.
▪Equipment may fall and cause injury or damage.
Unplug the Equipment
▪Stop using the equipment immediately if it smokes, emits an
unusual smell, makes abnormal sounds, or if liquids or other
foreign materials enter the equipment.
▪If the above-mentioned abnormalities occur, immediately turn
off the power, unplug the equipment and contact the service
center.
▪If you ignore these symptoms, the equipment may catch on fire
or cause electric shock.

Chapter1. Preface Operator Manual
1-6 © 2014 Nautilus Hyosung Inc. All Rights Reserved.
Related Document
▶The related documents are listed as follows. If needed, please contact staffs of our
technical support team and maintenance team.
▪Installation Manual
▪Service Manual
▪Quick Reference Guide
For the contact of maintenance staffs of Nautilus Hyosung, see the E-mail addresses
and telephone numbers provided separately.

Operator Manual Chapter2. Introduction
© 2014 Nautilus Hyosung Inc. All Rights Reserved. 2-1
Chapter2. Introduction
About the MX8200QT
▶The MX8200QT is a full service ATM. Customers deposit the cash/check, make the
withdrawal and receive the transaction records through openings in the fascia with
MX8200QT ATM.
The MX8200QT is a versatile, easily maintained delivery system that can be modified
to keep pace with the bank's changing needs.
▶The benefits that the new concept MX8200QT provides are as follows.
Removes inconvenience which occurs when bank clerks directly handle cash and
checks with customers and relieves workload upon tellers by processing deposit/
withdrawal of cash/check automatically.
Relieves risks and burden of directly handling cash/check by directly keeping cash/
check deposited in a safe.
Allows tellers to calculate and close amount on hand faster than the existing manual
calculation.
Abank customer and a teller can easily interact on a touch screen, just like talking,
through Nautilus Hyosung’s intuitive and easy UI.
Supports expanded options such as coin dispenser and RF (NFC), as well as basic
functions of deposit/withdrawal of cash/check.
Allows easy and quick installation and maintenance.

Chapter2. Introduction Operator Manual
2-2 © 2014 Nautilus Hyosung Inc. All Rights Reserved.
The Exterior Overview
►The following picture shows the front of MX8200QT and key units.
The fascia provides the interface between the customer and MX8200QT.
The customer selects transactions and requests information at the fascia.
Card
Reader
Customer
Display
(OPL)
Receipt
Printer
Coin
Dispenser
Encryption
PIN Pad
BRM (Cash
In/Out)
CCIM (Check
Deposit)

Operator Manual Chapter2. Introduction
© 2014 Nautilus Hyosung Inc. All Rights Reserved. 2-3
The Interior Overview
►The MX8200QT consists of the main body where banknotes are stored and the side car
where the CCIM and Coin Dispenser are installed.
The interior and key units are as follows.
Security
Enclosure
Door
Lower Body of
BRM
Upper
Body of
BRM
Seismic & Heat
Alarm Box
Receipt
Printer
Teller
Display
CE
Power Supply
CCIM
Coin
Dispenser

Chapter2. Introduction Operator Manual
2-4 © 2014 Nautilus Hyosung Inc. All Rights Reserved.
Basic Features
▶Important features of the MX8200QT is highlighted in the following list:
Main Controller
CPU
Core2Duo E7400
(2.8GHz)
Memory
DDR Memory
4 GB
Storage
Device
SSD
128 GB
ODD
DVD-RW
Operating System
Windows XP Professional
with SP3
Windows7
Expansion Slots
2-PCI, 1-PCI-Expressx16,
1-PCI-Expressx1
Serial Ports
1Ports
USB Ports
19Ports
(M/B 8EA, Hub 11)
USER PORTS 2EA
VGA
On-Board Dual VGA
DVI & RGB
LAN
10/100/1000Mbps On-Board
Status Display LED
HDD/PWR LED
Customer Display
Display
Type
21.5 inch TFT LCD
Resolution
WSXGA
1080XRGBX1920
White
Luminance
250cd/m²
Secure
Monitor
Field Support, Choice by User
Input Method
Touch Screen
21.5 inch Multi Touch Screen
Privacy Filter
21.5 inch
(292 mm X 495 mm)
Viewing Angle 60°
Guide Light
Flicker
Main : BRM/SPR/MCU
Side Car : COIN/CCIM
Color : Blue
Indicator
CCR/PALM(opt.)
Color : Blue
Teller
Color : Blue & Red
Customer Input Method
Touch Screen
21.5 inch Infrared Multi Touch
Screen
USB Interface
PIN-Pad
Polycarbonate EPP
(PCI Compliant)
EPP WING Support
Supervisor Operation
Display Module
10.4” TFT LCD, 250cd/m2

Operator Manual Chapter2. Introduction
© 2014 Nautilus Hyosung Inc. All Rights Reserved. 2-5
Input Method
10.4” Resistive Touch Screen
Bill Recycling Module
Interface Type
USB 1.1(Main), USB 2.0(BC)
Sutter type
Automatic Shutter
Functional Architecture
5 Recycle / 1 Reject / 1 Utility
Cassette
Dispense
Denomination
US$ 1, 10, 20, 50
Dispense
MAX
200 bills per Transaction
Method
Bundle
Deposit
Denomination
US$ 1,2,5,10,20,50,100
Input MAX
200 bills per Transaction
Method
Bundle
Cassette
Install Max
15,650 bills (when auto stack)
For 0.1mm thickness
bill
16,400 bills (Injection of human)
Recycling
CST
2,850 bills (when auto stack)
3,000 bills (Injection of human)
Reject CST
800 bills (when auto stack)
Utility CST
600 bills (300/300,when auto
stack) -> optionally available
(Reject/Retract)
Cash & Check In Module
Media Size
Width
Min : 2.36 inch (60 mm)
Max : 4.01 inch (102 mm)
Length
Min : 4.33 inch (110 mm)
Max : 9.055 inch (230 mm)
Thickness
Min : 0.003 inch (0.0762 mm)
Max : 0.0079 inch (0.203 mm)
Bundle Capacity
50 Checks/1 transaction
One Single Deposit
Slot
Deposit Direction
4 way
Capacity
Deposit
Cassettes
2,000 notes/1 cassette
2,000 checks/1 cassette
Criteria for Deposit
New Notes & Checks
Reject
Cassette
50 Mixed Notes and Checks
Article 6
Cassette
10 Mixed Notes and Checks
Escrow
50 Mixed Notes and Checks
/1 transaction
Deposit
Reject
50 Mixed Notes and Checks
/1 transaction

Chapter2. Introduction Operator Manual
2-6 © 2014 Nautilus Hyosung Inc. All Rights Reserved.
Image scanning
Double side scanning
200 dpi
MICR
CMC-7, E13-B,
Endorsement Print
Double side printing, Ink jet
Shutter Type
Automatic Shutter
Contactless Reader
Functional Branding
Chase Bank Logo, Octagon
LED
Audio guidance
Beeper
Transaction Interface
13.56MHz ISO14443 Type A,B,
NFC and MiFare
Payment Applications
American Express-Express Pay
Discover Zip, JCB J/speedy
Master card Pay Pass Mstripe
Visa payWave MSD
Card Reader
Type
Dip Type (USB)
Magnetic Stripe
ISO 1,2,3 Read
IC Card
Supported
Receipt Printer
Printing Type
Thermal Line Printing
Printing Width
3.15inch (80mm) Max
Paper Roll Capacity
1,000 Transaction/Roll
Depending on format
Paper
Specification
Type
Thermal Roll Paper
Width
Max. 3.15inch (80mm)
Outer
Diameter
Max. 100Φ
CoinHopper
Denomination
4 sorts
Dispensing Capacity
1cent 658ea, 5cent 449ea,
10cent 847ea, 25cent 355ea
Journal
Electronic Journal
Supported
Safety & Security
Safety
UL 291 Level-1

Operator Manual Chapter2. Introduction
© 2014 Nautilus Hyosung Inc. All Rights Reserved. 2-7
Security Locking Device
Cencon Lock
Key Lock
Common Keys
Alarm
Seismic/Heat Sensor
Security
Terminal Block (External I/F)
Camera
CCD Cameras
1st (face) & 2nd (hand)
Additional Function
Audio Guidance
Sound Card On-Board
ADAAudio Guidance
Volume Control Supported
Proximity Sensor
Infrared Type
Distance: 1.18 ~
14.17inch (30~360mm)
Installation Method
Anchor

Chapter2. Introduction Operator Manual
2-8 © 2014 Nautilus Hyosung Inc. All Rights Reserved.
Devices of MX8200QT
Customer Display & Keypad
▶The Customer Display welcomes the customer and provides instructions for performing
transactions at the ATM.
During the transaction, the ATM prompts the customer to use the customer keypad to
enter transaction information. The 16-key keypad uses an Encryption PIN Pad
technology to secure the information entered by the customer at the keypad. The
customer touch screen is used with the customer display. The customer selects
functions or enters information by touching the screen.
Basic Specification of Customer Display
▪21.5 inch TFT LCD
▪WSXGA Resolution
▪250cd/m2 Brightness
▪21.5 inch Privacy Filter Supported
Basic Specification of Keypad
▪Polycarbonate Encryption PIN Pad (PCI Compliant)
Customer
Display
(OPL)
Encryption
PIN Pad

Operator Manual Chapter2. Introduction
© 2014 Nautilus Hyosung Inc. All Rights Reserved. 2-9
Teller display
▶Basic Specification of Teller Display
▪10.4 inch TFT LCD, 250cd/m2
▪10.4 inch Resistive Touch Screen

Chapter2. Introduction Operator Manual
2-10 © 2014 Nautilus Hyosung Inc. All Rights Reserved.
Card Reader
▶The dip card reader is a manually operated device mounted directly to the ATM fascia.
The consumer inserts an ATM card in the card entry slot and then removes the card to
begin the transaction. The dip card reader can read magnetic stripe cards and memory
chip cards. The dip card reader cannot retract, capture, or retain cards.
Basic Specification of Card Reader
▪Dip Type Card Reader
▪ISO 1, 2, 3 Read
▪IC Card Supported