Detecto DLM User manual

DLM
Digital Length Measuring
Device
User Manual
Cardinal Scale Mfg. Co.
203 E. Daugherty, Webb City, MO 64870 USA
8525-0367-O1 Rev A Ph: 417-673-4631 •Fax: [phone]
09/17 www.detecto.com
Technical Support: Ph: 866-254-8261 •[email protected]

ASSEMBLY

1. Read measured result from display or (A).
2. Fix left indicator at the end of ruler.
3. Slide right indicator left to slightly
touch the baby’s feet.
Check and make records.
HOW TO MEASURE YOUR BABY

* To Calibrate The Height Measurement
1. 2.
■ON/OFF ■UNIT ■HOLD
■ON/OFF
1. Press this key to power up the height rod;
the display will show current height
2. Press the ON/OFF key to switch off the height rod.
■UNIT
1. Press this key to select height unit (cm and ft/ inch and inch).
■HOLD
1. Press to hold the reading of height of baby
when right plate slighty touches baby’s feet.
2. Press again to release the reading.
■Reset
1. Reset function: slide down indicator to end and press
Reset kg to zero the system.
Measurement range: 35-80cm / 13 3
4~ 31 1 2inch
Graduations: 1mm. 1
16 inch
Dimensions (W x H x L): 29 x 7 x 62 cm
Weight: 700g
Temperature range: +10℃up to +40℃
*Batteries installation: 1.5V AAA x 2
IN-8457 80001A
KEY FUNCTION