Detecto IB800 User manual

0046-M563-O1 Rev A IB800 ASSEMBLY INSTRUCTIONS
1
IB Series
Model IB800
Assembly Instructions
203 E. Daugherty, Webb City, MO 64870 USA
0046-M563-O1 Rev A
Ph: 417-673-4631 Fax: [phone]
Printed in USA
02/13
www.detecto.com
Technical Support: Ph: 866-254-8261 [e-mail]
Technical Support: Ph: 866-254-8261 te[email protected]

0046-M563-O1 Rev A IB800 ASSEMBLY INSTRUCTIONS
2

0046-M563-O1 Rev A IB800 ASSEMBLY INSTRUCTIONS
1
INTRODUCTION
Thank you for purchasing our DETECTO™ IB Series Model IB800 in-bed scale. It has been
manufactured with quality and reliability and has been assembled and tested before leaving
our factory to insure accuracy and dependability for years to come.
This manual is provided to guide you through the assembly of your scale. Please read it
thoroughly before attempting to assemble your scale and keep it handy for future reference.
COPYRIGHT
All rights reserved. Reproduction or use, without expressed written permission, of editorial or
pictorial content, in any manner, is prohibited. No patent liability is assumed with respect to
the use of the information contained herein.
DISCLAIMER
While every precaution has been taken in the preparation of this manual, the Seller assumes
no responsibility for errors or omissions. Neither is any liability assumed for damages resulting
from use of the information contained herein. All instructions and diagrams have been
checked for accuracy and ease of application; however, success and safety in working with
tools depend to a great extent upon the individual accuracy, skill and caution. For this reason
the Seller is not able to guarantee the result of any procedure contained herein. Nor can they
assume responsibility for any damage to property or injury to persons occasioned from the
procedures. Persons engaging the procedures do so entirely at their own risk.
DANGER! NOT A PATIENT TRANSPORT DEVICE!
This scale is NOT intended for use in transporting patients! It is to be
used ONLY for weighing a patient. Failure to observe this warning may
result in serious injury to the patient and/or the scale operator.
PRECAUTIONS
Before beginning assembly of this scale, read this manual and
pay special attention to all "NOTIFICATION" symbols:
IMPORTANT:

0046-M563-O1 Rev A IB800 ASSEMBLY INSTRUCTIONS
2
ASSEMBLY INSTRUCTIONS
The IB Series Model IB800 in-bed scale is shipped disassembled in three (3) separate cartons.
Carefully inspect all cartons for damage that may have taken place during shipment. It is the
responsibility of the purchaser to file all claims with the shipping company for damages or loss
incurred during transit.
Packing Checklist
NOTE: All nuts, bolts or screws are already in position on the scale and “finger tight”. No
hardware is package separately. Contents of cartons should include:

Item Description
Part Number
Qty
Carton 1

Base Assembly
0046-D217-0A
1

Column Weldment
0046-D277-0A
1
Carton 2

Boom Assembly
0046-C279-0A
1

Hydraulic Cylinder
6540-1119
1

Handle Extension
0046-B242-08
1

Indicator / Handle Assembly
0046-B549-1A
1

Stretcher Hoop
0046-D261-08
2

Stretcher Cup
0046-B005-08
1

Anti-Swing Bar
0046-B518-08
2

0.5 ml Capsule, Loctite®
6560-1046
1

Indicator
Model 750
1
Carton 3

Stretcher Support Bars
0046-C248-08
2

Stretcher
0046-C247-08
1
The capsule of Loctite® is in a plastic bag taped to the Boom Assembly.
Tools Required
The following tools are required to assemble the IB Series Model IB800 in-bed scale:
1/2" drive ratchet wrench
1/2” drive 15/16” and 3/4” standard socket
15/16”, 1/2" and 7/16" wrench (open end, box end, or combination)
5/16” and 3/16” Allen wrench
Small Flat Blade Screwdriver

0046-M563-O1 Rev A IB800 ASSEMBLY INSTRUCTIONS
3
Unpacking
IMPORTANT: UNPACKING AND ASSEMBLY OF THIS PRODUCT REQUIRES
TWO PEOPLE. PLEASE READ THROUGH THE INSTRUCTIONS CAREFULLY
BEFORE STARTING TO ASSEMBLE THE SCALE.
Remove the shipping straps and packing material to unpack the IB Series Model IB800 in-bed
scale. Check the parts against the PACKING CHECKLIST. If any are damaged or missing,
please contact our Parts Department at 1-800-641-2045 or by email at [email protected].
NOTE: Leave the shipping straps and packing material on the Boom Assembly
until instructed to remove it in Step 7.
Carton 2
Upper Section
Carton 2
Lower Section
Carton 1
Carton 3