Kobalt 0056641 User manual

1
Serial Number Purchase Date
Questions, problems, missing parts? Before returning to your retailer, call our
customer service department at 1-888-3KOBALT (1-888-356-2258), 8 a.m - 8 p.m., EST,
Monday - Friday.
ATTACH YOUR RECEIPT HERE
ITEM #0595523
MODEL #0056641
WALL
CABINET
Français p. 11
Español p. 21
AB15136
Lowes.com
KOBALT® and the K Design® are registered
trademarks of LF, LLC. All Rights Reserved.

TABLE OF CONTENTS
2Lowes.com
Package Contents
Hardware Contents
Safety Information
Preparation
Assembly Instructions
Troubleshooting
Warranty
Replacement Parts List
......................................................................................................................3
.....................................................................................................................4
......................................................................................................................5
.................................................................................................................................5
................................................................................................................6
........................................................................................................................10
...................................................................................................................................10
............................................................................................................10

PACKAGE CONTENTS
PART QUANTITY
A
B
C
D
E
1
1
1
1
1
1
1
1
1
1
Back
Left side
Right side
Top
Base
DESCRIPTION
3
PART QUANTITY
F
G
H
I
J
Bottom shelf
Middle shelf
Left door
Right door
Cabinet bracket
DESCRIPTION
Lowes.com
A
D
C
B
E
G
F
H
I
J

HARDWARE CONTENTS
4
5/16 - 18 x 3/4 in.
Carriage bolts
Qty. 4
5/16 - 18 in.
Flange nuts
Qty. 4
1 in. Flat washer
Qty. 6
ST4.8 x 10 mm
Screw
Qty. 8+2
Cabinet spacers
Qty. 2
1/4 - 20 x 1/2 in.
truss screws
Qty. 2
1/4 - 20 in. hex nut
Qty. 2
Outside cabinet
brackets
Qty. 2
Inside cabinet
brackets
Qty. 2
AA BB CC DD
EE FF
5 x 15 x 1.2 mm
Washer
Qty. 4
D8 x 50.8 mm
expansion tube
Qty. 4
GG HH
II JJ
ST4.8 x 57 mm pan
head tapping screws
Qty. 4
KK LL
Lock
(preassembled to right door (I))
Qty. 1
Key
(preassembled to right door (I))
Qty. 2
MM
NN
Lowes.com

5
SAFETY INFORMATION
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents above.If any part is missing or damaged, do not
attempt to
It is recommended that this product be assembled on a clean, soft surface, such as a piece of
cardboard.
assemble the product.Contact customer service for replacement parts.
Estimated AssemblyTime: 30 minutes (does not include unpacking time)
Tools Required for Assembly (not included): Drill, Phillips screwdriver,
Adjustable wrench
CAUTION
• Do not overload shelf (100 lbs. max.) or store loose or heavy items on the top of the unit.
• When storing items on the middle shelf or bottom shelf, equally distribute loads.
• Do not store flammable liquids in the unit unless they are secured in an approved container.
• Do not store gasoline in the unit under any circumstances.
• When mounting unit to wall, ensure studs are plumb and square.
• When mounting multiple units to a wall, check local building codes or consult with a contractor to
determine the maximum load rating for your desired installation.
WARNING
• Do not stand on, step on, or alter this unit for anything outside the designed function of storage.
• Use care when handling and assembling metal plates.
• The metal may have sharp edges or corners. The use of protective gloves is recommended.
• Always remember to use proper lifting techniques when moving the boxed or assembled unit.
Lowes.com

ASSEMBLY INSTRUCTIONS
6
1
B
B
C
A
A
1. Slide preassembled screws into key slots
of back (A) to connect left side (B) and
right side (C) to back (A). Tighten the
screws.
Note: Be sure to keep back (A) on a soft
surface, such as carpeting or a piece of
cardboard, to protect it from scratches.
Hardware Used
AA x 4ST4.8 x 10 mm
Screw
2. Push and tighten the preassembled
screws on the assembled unit from Step
1 to the key slots of base (E). Tighten the
ST4.8 x 10 mm screws (AA) to the front
edge of the base (E) to connect left side
(B) and right side (C) to base (E).
Lowes.com
C
A
E
B
AA
2
E
AC
E
C
B
A
E

ASSEMBLY INSTRUCTIONS
7
3. Use 5/16 - 18 x 3/4 in. carriage bolts (BB),
5/16 - 18 in. flange nuts (CC), and 1 in. flat
washers (DD) to secure outside cabinet
brackets (EE) and inside cabinet brackets
(FF) to the cabinet. Screw cabinet spacers
(GG) with 1/4 - 20 x 1/2 in. truss screws
(HH), 1 in. flat washers (DD) and 1/4 - 20
in. hex nuts (II) to the back of the
assembled unit.
Hardware Used
BB x 4
5/16 - 18 x 3/4 in.
Carriage bolts
CC x 4
5/16 - 18 in.
Flange nuts
DD x 61 in. Flat washers
EE x 2
Outside cabinet
brackets
FF x 2
Inside cabinet
brackets
GG x 2
Cabinet
spacers
HH x 2
1/4 - 20 x 1/2 in.
truss screws
4. Install the bottom shelf (F) by tipping it
to the side and inserting it into the
cabinet. With bottom shelf (F) at an
angle, align the cut-outs on the bottom
shelf (F) with the back seams caused
by left side (B), right side (C) and back
(A). Carefully lower the bottom shelf
(F) , ensuring the front of the bottom
shelf (F) goes over the front flange of
the base (E).
Determine the location for the middle
shelf (G). Hold the shelf (G) at an angle
to make it easier to install. Repeat
above method to install. Please make
sure middle shelf (G) snaps into the
hooks on the back (A).
II x 2
1/4 - 20 in. hex nut
Note: If inside front shelf tabs are
flattened during assembly, use a flat
screwdriver (not included) to adjust tabs.
Lowes.com
3
FF
DD
CC
A
EE
EE BB
HH
GG
GG
DD
II
4G
G
A
F
E
B
C
F
E
G

ASSEMBLY INSTRUCTIONS
8
Hardware Used
AA x 4ST4.8 x 10 mm
Screw
5. Slide and tighten the preassembled
screws in the top (D) to the assembled
unit. Tighten ST4.8 x 10 mm screws
(AA) to the front edge of top (D) to
connect the left side (B) and right side
(C) to top (D).
6. Lift and pull the L-shaped pivot pin on
the edge of the right door (I), aligning
the assembling hole of the base (E)
and top (D), then release. Repeat for
left door (H).
Lowes.com
6I
D
E
H
I
E
5
C
D
A
AA
B
B
D
D

ASSEMBLY INSTRUCTIONS
9
Hardware Used
LL x 4
5 x 15 x 1.2 mm
Washer
KK x 4
ST4.8 x 57 mm pan
head tapping screws
7. Determine the location for the cabinet
bracket (J). Drill 4 holes (with the diam-
eter of about 8.5 mm) in the wall studs.
Insert D8 x 50.8 mm expansion tubes
(JJ) in the drilled holes. Feed ST4.8 x 57
mm pan head tapping screws (KK)
through 5 x 15 x 1.2 mm washers (LL)
and cabinet bracket (J). Screw ST4.8 x
57 mm pan head tapping screw (KK) to
the D8 x 50.8 mm expansion tubes (JJ)
in the wall studs.
8. Carefully lift and place the outside
cabinet brackets (EE) into the top
cabinet bracket (J).
x 4
JJ D8 x 50.8 mm expansion tube
7
KK
Wall
LL JJ
J
Note: Ensure the cabinet bracket (J) is
installed horizontally, or the two doors will
probably not be properly aligned after
step 8.
Lowes.com
8
J
EE

10
LIFETIME HASSLE-FREE GUARANTEE
REPLACEMENT PARTS LIST
For replacement parts, call custom service at 1-888-3KOBALT, 8 a.m. - 8 p.m., EST, Monday - Friday.
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
Screw(s) will not
align into hole(s). 1. Natual properties of sheet
metal cause slight changes in
pre-drilled hole location.
1. Unit is not level. 1. Remove the unit from the wall
and ensure the studs are plumb
and square.
1. Place screws into all aligned holes
and hand tighten. Push a 3/8 in.
hole-punch through both holes to
force the alignment. With the
hole-punch in place, tighten all other
screws. When the hole-punch is
removed, the screw(s) should easily
fit into the remaining hole(s).
Doors will not
remain closed.
PART PART #
A
B
C
D
E
F
G
H
I
J
K
L
M
AA
Back
Left side
Right side
Top
Base
Bottom shelf
Middle shelf
Left door
Right door
Cabinet bracket
Door magnet
Door L shape pivot pin
Spring
ST4.8 x 10 mm screw
595523-A
595523-B
595523-C
595523-D
595523-E
595523-F
595523-G
595523-H
595523-I
595523-J
595523-K
595523-L
595523-M
595523-AA
19493-BB
595523-CC
595523-DD
595523-EE
595523-FF
595523-GG
595523-HH
595523-II
595523-JJ
595523-KK
595523-LL
595523-MM
595523-NN
595523-OO
DESCRIPTION PART
BB
CC
DD
EE
FF
GG
HH
II
JJ
KK
LL
MM
NN
OO
5/16 - 18 x 3/4 in. Carriage bolts
5/16 - 18 in. Flange nuts
1 in. Flat washer
Outside cabinet brackets
Inside cabinet brackets
Cabinet spacer
1/4 - 20 x 1/2 in. truss screws
1/4 - 20 in. hex nut
D8 x 50.8 mm expansion tube
Pan head tapping screws
5 x 15 x 1.2 mm Washer
Lock
Key
Electrical bushing
DESCRIPTION PART #
This product carries a lifetime warranty. If the product is found to be defective, please call 1-888-
3KOBALT, 8 a.m. - 8 p.m., EST, Monday - Friday, or return the item to the place of purchase with
a copy of the original sales receipt. The distributor will, at its option, repair or replace the product.
This warranty gives you specific legal rights, and you may have other rights that vary from state to
state.
Printed in China
Lowes.com
KOBALT® and the K Design® are registered
trademarks of LF, LLC. All Rights Reserved.