Rapid Racking Chrome wine rack User manual

Chrome wine rack
Assembly instruction
AIC001

RAPID CHROME WINE RACK
IMPORTANT - ASSEMBLY INSTRUCTIONS
COMPONENTS
ASSEMBLY
1Take a chrome upright Aand 2 shelf clips C.
Locate the shelf clips in the bottom ring of the upright.
Ensure the clips are firmly located in the upright ring and the
clip is tapering upwards (thin end at the top).
2Repeat 1for all 4 uprights.
Tools required:
Rubber mallet A1270mm Chrome
upright – 4 of
CBlack Plastic Shelf
Clips – 56 of
3Place a shelf Bover the uprights ensuring the
shelf fits over the clips. Tap the shelf with a
mallet to tighten on the clips.
4Take 2 shelf clips Cand place on an upright to
show 6 clear rings between the bottom of the
clips and the top of the bottom shelf.
B915mm x 355mm shelves – 7 of
5Repeat for the other 3 uprights.
6Repeat 3.
7Repeat for the remaining shelves but note that the space between the top shelf and the shelf
below is only 5 rings on the upright.
8Load the unit with the bottom, sit back and enjoy your wine.
If you have any problems whatsoever please call 01285 686868 where a team of experts will be pleased to help.
AIC001