DeWalt DCMST561 User manual

DCMST561

B
Copyright DeWALT
English (original instructions) 5
Русский (перевод с оригинала) 15
Англійська (оригінальні інструкції) 28

1
Fig. A
Fig. B
12
13
12
35
13
XXXX XX XX
18
12
14
11
3
4
5
10
1
6
7
8
2
15
16
13
9
17

2
Fig. DFig. C
Fig. E
Fig. G Fig. H
Fig. F
610 mm
6
7
8
20
24 24
4
23
5
9
14
4
21

3
Fig. JFig. I
Fig. K
Fig. M Fig. N
Fig. L
30
27
29
26
26
33
29
28
31 32
34

4
Fig. O Fig. P
21

ENGLISH
5
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with a
standardised test given in EN50636-2-91 and may be used to
compare one tool with another. It may be used for a preliminary
assessment ofexposure.
WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total workingperiod.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
over the total workingperiod.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm
(relevant for vibration), organisation of workpatterns.
DCMST561
Voltage VDC 18
UK & Ireland VDC 18
Type 2
Battery type Li-Ion
Power output W400
RPM 0–4600/
0–6000
Cutting Swath Size mm 350
Swath cm 36
Weight (without battery pack) kg 3.6
Noise values and vibration values (triax vector sum) according to
EN50636-2-91:2014
LPA (emission sound pressure level) dB(A) 79
K (uncertainty for the given sound level) dB(A) 2.1
LWA (sound power level) dB(A) 93.5
K (uncertainty for the given sound level) dB(A) 2.6
Vibration emission value a
h
= m/s23.9
Uncertainty K = m/s21.5
English (original instructions)
Congratulations!
You have chosen a DeWALT tool. Years of experience, thorough
product development and innovation make DeWALT one of the
most reliable partners for professional power toolusers.
Technical Data
STRING TRIMMER
DCMST561
EC-Declaration of Conformity
Machinery Directive
String Trimmer
DCMST561
DeWALT declares that these products described under
Technical Data are in compliance with:
2006/42/EC, EN60335-1:2012 + A11:2014 + A13:2017 + A1:2019
+ A14:2019 + A2:2019 EN50636-2-91:2014.
2000/14/EC, Lawn Trimmer, L ≤ 50 cm, Annex VI
DEKRA Certification B.V.
Meander 1051 / P.O. Box 5185
6825 MJ ARNHEM / 6802 ED ARNHEM, Netherlands
Notified Body ID No.: 0344
Level of accoustic power according to 2000/14/EC
(Article 12, Annex III, L ≤ 50 cm=):
LPA (measured emission sound pressure) 79 dB(A)
uncertainty (K) = 2.1 dB(A)
LWA (guaranteed sound power) 96 dB(A)
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact DeWALT at
the following address or refer to the back of themanual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf ofDeWALT.
Markus Rompel
Vice-President Engineering, PTE-Europe
DeWALT, Richard-Klinger-Straße 11,
D-65510, Idstein, Germany
15.10.2020
WARNING: To reduce the risk of injury, read the
instructionmanual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
thesesymbols.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
seriousinjury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
seriousinjury.

6
ENGLISH
Batteries
Chargers/Charge Times (Minutes)
Cat #
DC
Weight
*Date code 201811475B or later
**Date code 201536 or later
Safety Instructions
WARNING: When using mains-powered appliances,
basic safety precautions, including the following, should
always be followed to reduce the risk of fire, electric shock,
personal injury and materialdamage.
WARNING: When using the machine the safety rules must
be followed. For your own safety and bystanders please
read these instructions before operating the machine.
Please keep the instructions safe for lateruse.
• Read all of this manual carefully before operating
theappliance.
• The intended use is described in this manual. The use of any
accessory or attachment or the performance of any operation
with this appliance other than those recommended in this
instruction manual may present a risk of personalinjury.
• Retain this manual for futurereference.
IMPORTANT
READ CAREFULLY BEFORE USE
KEEP FOR FUTURE REFERENCE
Safe Operating Practices
Training
a ) Read the instructions carefully. Be familiar with the
controls and the correct use of themachine.
b ) Never allow children or people unfamiliar with these
instructions to use the machine. Local regulations can
restrict the age of theoperator.
c ) Keep in mind that the operator or user is responsible
for accidents or hazards occurring to other people or
theirproperty.
Preparation
a ) Before use, always visually inspect the machine for
damaged, missing or misplaced guards orshields.
b ) Never operate the machine while people, especially
children, or pets arenearby.
Operation
a ) Wear eye protection and stout shoes at all times
while operating themachine.
b ) Avoid using the machine in bad weather conditions
especially when there is a risk oflightning.
c ) Use the machine only in daylight or good
artificiallight.
d ) Never operate the machine with damaged guards or
shields or without guards or shields inplace.
e ) Switch on the motor only when the hands and feet
are away from the cuttingmeans.
f ) Do not overreach, keep your balance at all times,
always be sure of your footing on slopes. Always
walk, neverrun.
g ) Always disconnect the machine from the power
supply (i.e. remove the plug from the mains, remove
the disabling device or removable battery)
• whenever the machine is left unattended;
• before clearing a blockage;
• before checking, cleaning or working on the machine;
• after striking a foreign object;
• whenever the machine starts vibratingabnormally.
h ) Take care against injury to feet and hands from the
cuttingmeans.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderateinjury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
propertydamage.
Denotes risk of electricshock.
Denotes risk offire.
Batteries Chargers/Charge Times (Minutes)
Cat # VDC Ah Weight (kg) DCB104 DCB107 DCB112 DCB113 DCB115 DCB118 DCB132 DCB119
DCB546 18/54 6.0/2.0 1.05 60 270 170 140 90 60 90 X
DCB547 18/54 9.0/3.0 1.46 75* 420 270 220 135* 75* 135* X
DCB548 18/54 12.0/4.0 1.44 120 540 350 300 180 120 180 X
DCB181 18 1.5 0.35 22 70 45 35 22 22 22 45
DCB182 18 4.0 0.61 60/40** 185 120 100 60 60/40** 60 120
DCB183/B 18 2.0 0.40 30 90 60 50 30 30 30 60
DCB184/B 18 5.0 0.62 75/50** 240 150 120 75 75/50** 75 150
DCB185 18 1.3 0.35 22 60 40 30 22 22 22 X
DCB187 18 3.0 0.54 45 140 90 70 45 45 45 90
DCB189 18 4.0 0.54 60 185 120 100 60 60 60 120
*Date code 201811475B or later
**Date code 201536 or later

7
ENGLISH
Residual Risks
In spite of the application of the relevant safety regulations
and the implementation of safety devices, certain residual risks
cannot be avoided. These are:
• Impairment ofhearing.
• Risk of personal injury due to flyingparticles.
• Risk of burns due to accessories becoming hot
duringoperation.
• Risk of personal injury due to prolongeduse.
SAVE THESE INSTRUCTIONS
• Do not operate the appliance in explosive atmospheres,
such as in the presence of flammable liquids, gases
ordust.
• When the appliance is stored or transported in a
vehicle it should be placed in the boot or restrained to
prevent movement following sudden changes in speed
ordirection.
• When not in use, the appliance should be stored in a dry,
well ventilated place out of reach ofchildren.
• Children should not have access to storedappliances.
Safety of Others
• This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person
responsible for theirsafety.
• Children must be supervised to ensure that they do not
play with theappliance.
• When the appliance is stored or transported in a
vehicle it should be placed in the boot or restrained to
prevent movement following sudden changes in speed
ordirection.
• When not in use, the appliance should be stored in a dry,
well ventilated place out of reach ofchildren.
• Children should not have access to storedappliances.
i ) Always ensure that the ventilation openings are kept
clear ofdebris.
Maintenance and storage
a ) Disconnect the machine from the power supply
(i.e. remove the plug from the mains, remove the
disabling device or removable battery) before
carrying out maintenance or cleaningwork.
b ) Use only the manufacturer’s recommended
replacement parts andaccessories.
c ) Inspect and maintain the machine regularly. Have
the machine repaired only by an authorizedrepairer.
d ) When not in use, store the machine out of the reach
ofchildren.
Additional Safety Instructions for
Grass Trimmers
WARNING: Cutting elements continue to rotate after the
motor is switchedoff.
• Wear long trousers to protect yourlegs.
• Before using the appliance, check that your cutting path
is free from sticks, stones, wire and any otherobstacles.
• Only use the appliance in the upright position, with the
cutting line near the ground. Never switch the appliance on
in any otherposition.
• Move slowly when using the appliance. Be aware that
freshly cut grass is damp andslippery.
• Do not work on steep slopes. Work across the face of slopes,
not up anddown.
• Never cross gravel paths or roads while the appliance
isrunning.
• Never touch the cutting line while the appliance
isrunning.
• Do not put the appliance down until the cutting line has
come to a complete standstill.
• Use only the appropriate type of cutting line. Never use
metal cutting line or fishingline.
• Be careful not to touch the line trimmingblade.
• Keep hands and feet away from the cutting line at all
times, especially when switching on themotor.
• Before using the appliance and after any impact, check
for signs of wear or damage and repair asnecessary.
• Take care against injury from any device fitted for
trimming the filament line length. After extending new
cutter line always return the machine to its normal operating
position before switchingon.
• Close supervision is necessary when the appliance is
used nearchildren.
• This appliance is not intended for use by young or infirm
persons withoutsupervision.
• This appliance is not to be used as atoy.
• Use in a dry location only. Do not allow the appliance to
becomewet.
• Do not immerse the appliance inwater.
• Do not open the body casing. There are not user-serviceable
parts inside
Chargers
DeWALT chargers require no adjustment and are designed to be
as easy as possible tooperate.
Electrical Safety
The electric motor has been designed for one voltage only.
Always check that the battery pack voltage corresponds to the
voltage on the rating plate. Also make sure that the voltage of
your charger corresponds to that of yourmains.
Your DeWALT charger is double insulated in
accordance with EN60335; therefore no earth wire
isrequired.
If the supply cord is damaged, it must be replaced by a
specially prepared cord available through the DeWALT
serviceorganisation.

8
ENGLISH
• Make sure that cord is located so that it will not be
stepped on, tripped over, or otherwise subjected to
damage orstress.
• Do not use an extension cord unless it is absolutely
necessary. Use of improper extension cord could result in risk
of fire,electric shock, orelectrocution.
• Do not place any object on top of charger or place
the charger on a soft surface that might block the
ventilation slots and result in excessive internal heat.
Place the charger in a position away from any heat source. The
charger is ventilated through slots in the top and the bottom
of thehousing.
• Do not operate charger with damaged cord or plug—
have them replacedimmediately.
• Do not operate charger if it has received a sharp blow,
been dropped, or otherwise damaged in any way. Take it
to an authorised servicecentre.
• Do not disassemble charger; take it to an authorised
service centre when service or repair is required. Incorrect
reassembly may result in a risk of electric shock, electrocution
orfire.
• In case of damaged power supply cord the supply cord must
be replaced immediately by the manufacturer, its service agent
or similar qualified person to prevent anyhazard.
• Disconnect the charger from the outlet before
attempting any cleaning. This will reduce the risk of
electric shock. Removing the battery pack will not reduce
thisrisk.
• NEVER attempt to connect two chargerstogether.
• The charger is designed to operate on standard
230V household electrical power. Do not attempt to
use it on any other voltage. This does not apply to the
vehicularcharger.
Charging a Battery (Fig. B)
1. Plug the charger into an appropriate outlet before inserting
battery pack.
2. Insert the battery pack 12 into the charger, making sure the
battery pack is fully seated in the charger. The red (charging)
light will blink repeatedly indicating that the charging
process has started.
3. The completion of charge will be indicated by the red
light remaining ON continuously. The battery pack is fully
charged and may be used at this time or left in the charger.
To remove the battery pack from the charger, push the
battery release button 13 on the battery pack.
NOTE: To ensure maximum performance and life of lithium-ion
battery packs, charge the battery pack fully before first use.
Charger Operation
Refer to the indicators below for the charge status of the
batterypack.
Mains Plug Replacement
(U.K. & Ireland Only)
If a new mains plug needs to be fitted:
• Safely dispose of the oldplug.
• Connect the brown lead to the live terminal in theplug.
• Connect the blue lead to the neutralterminal.
WARNING: No connection is to be made to the
earthterminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 3A.
Using an Extension Cable
An extension cord should not be used unless absolutely
necessary. Use an approved extension cable suitable for
the power input of your charger (see Technical Data). The
minimum conductor size is 1mm2; the maximum length
is30m.
When using a cable reel, always unwind the cablecompletely.
Important Safety Instructions for All Battery
Chargers
SAVE THESE INSTRUCTIONS: This manual contains important
safety and operating instructions for compatible battery
chargers (refer to TechnicalData).
• Before using charger, read all instructions and cautionary
markings on charger, battery pack, and product using
batterypack.
WARNING: Shock hazard. Do not allow any liquid to get
inside charger. Electric shock mayresult.
WARNING: We recommend the use of a residual current
device with a residual current rating of 30mA orless.
CAUTION: Burn hazard. To reduce the risk of injury,
charge only DeWALT rechargeable batteries. Other types of
batteries may burst causing personal injury anddamage.
CAUTION: Children should be supervised to ensure that
they do not play with theappliance.
NOTICE: Under certain conditions, with the charger
plugged into the power supply, the exposed charging
contacts inside the charger can be shorted by foreign
material. Foreign materials of a conductive nature such
as, but not limited to, steel wool, aluminum foil or any
buildup of metallic particles should be kept away from
charger cavities. Always unplug the charger from the
power supply when there is no battery pack in the cavity.
Unplug charger before attempting to clean
• DO NOT attempt to charge the battery pack with any
chargers other than the ones in this manual. The charger
and battery pack are specifically designed to worktogether.
• These chargers are not intended for any uses other than
charging DeWALT rechargeable batteries. Any other uses
may result in risk of fire, electric shock orelectrocution.
• Do not expose charger to rain orsnow.
• Pull by plug rather than cord when disconnecting
charger. This will reduce risk ofdamage to electric plug
andcord.

9
ENGLISH
Battery Packs
Important Safety Instructions for All Battery
Packs
When ordering replacement battery packs, be sure to include
catalogue number and voltage.
The battery pack is not fully charged out of the carton. Before
using the battery pack and charger, read the safety instructions
below. Then follow charging procedures outlined.
READ ALL INSTRUCTIONS
• Do not charge or use battery in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Inserting or removing the battery from the charger may
ignite the dust or fumes.
• Never force battery pack into charger. Do not modify
battery pack in any way to fit into a non-compatible
charger as battery pack may rupture causing serious
personal injury.
• Charge the battery packs only in DeWALT chargers.
• DO NOT splash or immerse in water or other liquids.
• Do not store or use the tool and battery pack in locations
where the temperature may fall below 4 ˚C (34 ˚F) (such
as outside sheds or metal buildings in winter), or reach
or exceed 40 ˚C (104 ˚F) (such as outside sheds or metal
buildings in summer).
• Do not incinerate the battery pack even if it is severely
damaged or is completely worn out. The battery pack can
explode in a fire. Toxic fumes and materials are created when
lithium-ion battery packs are burned.
• If battery contents come into contact with the skin,
immediately wash area with mild soap and water. If
battery liquid gets into the eye, rinse water over the open eye
for 15 minutes or until irritation ceases. If medical attention
is needed, the battery electrolyte is composed of a mixture of
liquid organic carbonates and lithium salts.
• Contents of opened battery cells may cause respiratory
irritation. Provide fresh air. If symptoms persists, seek
medicalattention.
WARNING: Burn hazard. Battery liquid may be flammable
if exposed to spark or flame.
WARNING: Never attempt to open the battery pack for
any reason. If battery pack case is cracked or damaged,
do not insert into charger. Do not crush, drop or damage
battery pack. Do not use a battery pack or charger that
has received a sharp blow, been dropped, run over or
damaged in any way (i.e., pierced with a nail, hit with
a hammer, stepped on). Electric shock or electrocution
Charge Indicators
Charging
Fully Charged
Hot/Cold Pack Delay*
*The red light will continue to blink, but a yellow indicator light
will be illuminated during this operation. Once the battery pack
has reached an appropriate temperature, the yellow light will
turn off and the charger will resume the charging procedure.
The compatible charger(s) will not charge a faulty battery pack.
The charger will indicate faulty battery by refusing to light.
NOTE: This could also mean a problem with a charger.
If the charger indicates a problem, take the charger and battery
pack to be tested at an authorised service centre.
Hot/Cold Pack Delay
When the charger detects a battery pack that is too hot or too
cold, it automatically starts a Hot/Cold Pack Delay, suspending
charging until the battery pack has reached an appropriate
temperature. The charger then automatically switches to the
pack charging mode. This feature ensures maximum battery
pack life.
A cold battery pack will charge at a slower rate than a warm
battery pack. The battery pack will charge at that slower rate
throughout the entire charging cycle and will not return to
maximum charge rate even if the battery pack warms.
The DCB118 charger is equipped with an internal fan designed
to cool the battery pack. The fan will turn on automatically
when the battery pack needs to be cooled. Never operate the
charger if the fan does not operate properly or if ventilation slots
are blocked. Do not permit foreign objects to enter the interior
of the charger.
Electronic Protection System
XR Li-Ion tools are designed with an Electronic Protection
System that will protect the battery pack against overloading,
overheating or deep discharge.
The tool will automatically turn off if the Electronic Protection
System engages. If this occurs, place the lithium-ion battery
pack on the charger until it is fully charged.
Wall Mounting
These chargers are designed to be wall mountable or to sit
upright on a table or work surface. If wall mounting, locate the
charger within reach of an electrical outlet, and away from a
corner or other obstructions which may impede air flow. Use
the back of the charger as a template for the location of the
mounting screws on the wall. Mount the charger securely using
drywall screws (purchased separately) at least 25.4mm long
with a screw head diameter of 7–9mm, screwed into wood to
an optimal depth leaving approximately 5.5mm of the screw
exposed. Align the slots on the back of the charger with the
exposed screws and fully engage them in the slots.
Charger Cleaning Instructions
WARNING: Shock hazard. Disconnect the charger
from the AC outlet before cleaning. Dirt and grease
may be removed from the exterior of the charger using a
cloth or soft non-metallic brush. Do not use water or any
cleaning solutions. Never let any liquid get inside the tool;
never immerse any part of the tool into a liquid.

10
ENGLISH
the FLEXVOLTTM battery is in a 54V or a 108V (two 54V batteries)
product, it will operate as a 54V battery.
Transport Mode: When the cap is attached to the FLEXVOLTTM
battery, the battery is in Transport mode. Keep the cap for
shipping.
When in Transport mode, strings
of cells are electrically
disconnected within the pack
resulting in 3 batteries with a
lower Watt hour (Wh) rating as compared to 1 battery with a
higher Watt hour rating. This increased quantity of 3 batteries
with the lower Watt hour rating can exempt the pack from
certain shipping regulations that are imposed upon the higher
Watt hour batteries.
For example, the Transport
Wh rating might indicate
3x36 Wh, meaning 3
batteries of 36 Wh each.
The Use Wh rating might
indicate 108Wh (1battery implied).
Storage Recommendations
1. The best storage place is one that is cool and dry away
from direct sunlight and excess heat or cold. For optimum
battery performance and life, store battery packs at room
temperature when not in use.
2. For long storage, it is recommended to store a fully charged
battery pack in a cool, dry place out of the charger for
optimal results.
NOTE: Battery packs should not be stored completely depleted
of charge. The battery pack will need to be recharged before
use.
Labels on Charger and Battery Pack
In addition to the pictographs used in this manual, the labels
on the charger and the battery pack may show the following
pictographs:
Read instruction manual before use.
See Technical Data for charging time.
Do not probe with conductive objects.
Do not charge damaged battery packs.
Do not expose to water.
Have defective cords replaced immediately.
Charge only between 4 ˚C and 40 ˚C.
Example of Use and Transport Label Marking
may result. Damaged battery packs should be returned to
service centre for recycling.
WARNING: Fire hazard. Do not store or carry the
battery pack so that metal objects can contact
exposed battery terminals. For example, do not place
the battery pack in aprons, pockets, tool boxes, product kit
boxes, drawers, etc., with loose nails, screws, keys, etc.
CAUTION: When not in use, place tool on its side on
a stable surface where it will not cause a tripping
or falling hazard. Some tools with large battery packs
will stand upright on the battery pack but may be easily
knocked over.
Transportation
WARNING: Fire hazard. Transporting batteries can
possibly cause fire if the battery terminals inadvertently
come in contact with conductive materials. When
transporting batteries, make sure that the battery
terminals are protected and well insulated from
materials that could contact them and cause a short
circuit. NOTE: Lithium-ion batteries should not be put in
checkedbaggage.
DeWALT batteries comply with all applicable shipping
regulations as prescribed by industry and legal standards which
include UN Recommendations on the Transport of Dangerous
Goods; International Air Transport Association (IATA) Dangerous
Goods Regulations, International Maritime Dangerous Goods
(IMDG) Regulations, and the European Agreement Concerning
The International Carriage of Dangerous Goods by Road (ADR).
Lithium-ion cells and batteries have been tested to section 38.3
of the UN Recommendations on the Transport of Dangerous
Goods Manual of Tests and Criteria.
In most instances, shipping a DeWALT battery pack will be
excepted from being classified as a fully regulated Class 9
Hazardous Material. In general, only shipments containing a
lithium-ion battery with an energy rating greater than 100 Watt
Hours (Wh) will require being shipped as fully regulated Class 9.
All lithium-ion batteries have the Watt Hour rating marked on
the pack. Furthermore, due to regulation complexities, DeWALT
does not recommend air shipping lithium-ion battery packs
alone regardless of Watt Hour rating. Shipments of tools with
batteries (combo kits) can be air shipped as excepted if the Watt
Hour rating of the battery pack is no greater than 100 Whr.
Regardless of whether a shipment is considered excepted
or fully regulated, it is the shipper's responsibility to consult
the latest regulations for packaging, labeling/marking and
documentation requirements.
The information provided in this section of the manual is
provided in good faith and believed to be accurate at the time
the document was created. However, no warranty, expressed or
implied, is given. It is the buyer’s responsibility to ensure that its
activities comply with the applicable regulations.
Transporting the FLEXVOLTTM Battery
The DeWALT FLEXVOLTTM battery has two modes: Use and
Transport.
Use Mode: When the FLEXVOLTTM battery stands alone or is in
a DeWALT 18V product, it will operate as an 18V battery. When

11
ENGLISH
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual beforeuse.
Wear eyeprotection.
Package Contents
The package contains:
1 String trimmer
1 Battery (DCB184-XJ)
1 Charger (DCB118-XJ)
1 Instruction manual
NOTE: Battery packs, chargers and kitboxes are not included
with N models. Battery packs and chargers are not included with
NT models. Bmodels include Bluetooth® batterypacks.
NOTE: The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth®, SIG, Inc. and any use of
such marks by DeWALT is under license. Other trademarks and
trade names are those of their respectiveowners.
• Check for damage to the tool, parts or accessories which may
have occurred duringtransport.
• Take the time to thoroughly read and understand this manual
prior tooperation.
Battery Type
The DCMST561 operates on a 18 volt battery pack.
These battery packs may be used: DCB181, DCB182, DCB183,
DCB183B, DCB184, DCB184B, DCB185, DCB187, DCB189,
DCB546, DCB547, DCB548. Refer to Technical Data for
moreinformation. Description (Fig. A)
WARNING: Never modify the power tool or any part of it.
Damage or personal injury couldresult.
1 Variable speed trigger
2 Lock-off button
3 Speed control switch
4 Auxiliary handle
5 Motor housing
6 Locking lever
7 Pole latch
8 Pole clasp
9 Guard
10 Spool housing
11 Battery housing
12 Battery pack
13 Battery release button
14 Handle
15 Upper pole
16 Lower pole
17 Lower pole clamp
Intended Use
This string trimmer is designed for professional trimming
applications. This product is not an edger and is not intended to
be used foredging.
DO NOT use under wet conditions or in the presence of
flammable liquids orgases.
DO NOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
thistool.
• Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
without supervision.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with thisproduct.
Date Code Position (Fig. A)
The date code 18, which also includes the year of manufacture,
is printed into thehousing.
Example:
2019 XX XX
Year of Manufacture
Only for indoor use.
Discard the battery pack with due care for the
environment.
Charge DeWALT battery packs only with designated
DeWALT chargers. Charging battery packs other
than the designated DeWALT batteries with a
DeWALT charger may make them burst or lead to
other dangerous situations.
Do not incinerate the battery pack.
USE (without transport cap). Example: Wh rating
indicates 108 Wh (1 battery with 108 Wh).
TRANSPORT (with built-in transport cap). Example:
Wh rating indicates 3 x 36 Wh (3batteries of 36 Wh).
Wear earprotection.
Do not expose the tool to rain or high
humidity or leave outdoors while it israining.
Switch the tool off. Before performing any
maintenance on the tool, remove the battery
from thetool.
Keep bystandersaway.
Directive 2000/14/EC guaranteed
soundpower.

12
ENGLISH
Proper hand position requires one hand on the main handle14
and one hand on the auxiliary handle4.
Switching Trimmer On and Off (Fig. A)
To turn the appliance on, squeeze the lock-off button2 and
then the variable speed trigger 1. To turn the appliance off,
release the variable speed trigger and the lock-offbutton.
WARNING:Never attempt to lock the trigger in the
onposition.
Speed Control Switch (Fig. A)
This string trimmer gives you the choice to operate at a
more efficient speed to extend the runtime for larger jobs, or
accelerate the trimmer speed for high-performancecutting.
To extend runtime, push the speed control switch3 forward
toward the auxiliary handle4 into the "LO" position. This mode
is best for larger projects that require more time tocomplete.
To accelerate the trimmer, pull the speed control switch back
toward the battery housing11 into the "HI" position. This mode
Proper Hand Position (Fig. G)
WARNING: To reduce the risk of serious personal injury,
ALWAYS use proper hand position asshown.
WARNING: To reduce the risk of serious personal
injury, ALWAYS hold securely in anticipation of a
suddenreaction.
OPERATION
Instructions for Use
WARNING: Always observe the safety instructions and
applicableregulations.
WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect battery pack
before making any adjustments or removing/
installing attachments or accessories. An accidental
start-up can cause injury.
Extending and Folding the Pole (Fig. A, C, P)
WARNING: To reduce the risk of injury, do not operate the
unit while folded. The unit must be fully extended and the
pole clasp secured before the battery is inserted. Remove
battery before folding the unit. Fold unit completely until
it locks inplace.
1. To lock pole into straight use position, first ensure battery
has been removed. Then flip up the locking lever6 rotate
pole latch7 forward and place the pole clasp8 over the
clasp catch20. Rotate the pole latch7 backwards until it
locks securely into position. Check the locking lever to make
sure it is properly locked inplace.
2. To fold the pole for storage or transportation, first ensure
battery has been removed. Then flip up the locking
lever 6 , rotate pole latch 7 forward and l ift the pole
clasp8 up and over the clasp catch 20 . Fold the pole
completely until the guard 9 securely locks into place
over the rear of the battery housing11.
Inserting and Removing the Battery Pack
from the Tool (Fig. B)
NOTE: Make sure your battery pack 12 is fullycharged.
To Install the Battery Pack into the Tool Handle
1. Align the battery pack 12 with the rails inside the tool’s
handle (Fig. B).
2. Slide it into the handle until the battery pack is firmly seated
in the tool and ensure that you hear the lock snap intoplace.
To Remove the Battery Pack from the Tool
1. Press the release button 13 and firmly pull the battery pack
out of the toolhandle.
2. Insert battery pack into the charger as described in the
charger section of thismanual.
Fuel Gauge Battery Packs (Fig. B)
Some DeWALT battery packs include a fuel gauge which
consists of three green LED lights that indicate the level of
charge remaining in the batterypack.
To actuate the fuel gauge, press and hold the fuel gauge
button 35. A combination of the three green LED lights will
illuminate designating the level of charge left. When the level
of charge in the battery is below the usable limit, the fuel gauge
will not illuminate and the battery will need to berecharged.
NOTE: The fuel gauge is only an indication of the charge left on
the battery pack. It does not indicate tool functionality and is
subject to variation based on product components, temperature
and end-userapplication.
ASSEMBLY AND ADJUSTMENTS
WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect battery pack
before making any adjustments or removing/
installing attachments or accessories. An accidental
start-up can causeinjury.
WARNING: Use only DeWALT battery packs andchargers.
Attaching the Auxiliary Handle (Fig. A, D)
1. Place the auxiliary handle4 on top of the handle base23
so the upper trimmer pole 15 is betweenthem.
2. Hold the auxiliary handle in place and slide the handle
bolts24 into the handle from the top, threading them into
the handlebase.
3. Tighten the handle bolts with the supplied hex wrench .
Ensure the handle is securelyattached.
Attaching Guard (Fig. E, F)
WARNING: Never remove the guard. Damage or personal
injury couldresult.
WARNING: NEVER OPERATE appliance WITHOUT
GUARD FIRMLY IN PLACE. The guard must always be
properly attached on the appliance to protect theuser.
1. Assemble the guard9 to the motor housing5.
2. Using a crosshead screwdriver, insert the four guard
screws21and tightensecurely.

13
ENGLISH
WARNING: To reduce the risk of serious personal
injury, turn appliance off and remove battery before
making any adjustments or removing/installing
attachments oraccessories.
WARNING: The use of any accessory not recommended
by DeWALT for use with this appliance could
behazardous.
WARNING: Do not use any blades, or any accessory or
attachment other than those recommended by DeWALT
on this trimmer. Serious injury or product damage
mayresult.
Optional Accessories
WARNING: Since accessories, other than those offered
by DeWALT, have not been tested with this product, use
of such accessories with this tool could be hazardous.
To reduce the risk of injury, only DeWALT recommended
accessories should be used with thisproduct.
Consult your dealer for further information on the
appropriateaccessories.
Cleaning
WARNING: Blow dirt and dust out of the main housing
with dry air as often as dirt is seen collecting in and around
the air vents. Wear approved eye protection and approved
dust mask when performing thisprocedure.
WARNING: Never use solvents or other harsh chemicals
for cleaning the non-metallic parts of the tool. These
chemicals may weaken the materials used in these parts.
Use a cloth dampened only with water and mild soap.
Never let any liquid get inside the tool; never immerse any
part of the tool into aliquid.
Lubrication
Your power tool requires no additionallubrication.
is best to cut through heavier growth and for applications that
need higherRPM.
NOTE: When in "HI" mode, runtime will be decreased as
compared to when trimmer is in "LO"mode.
Trimming (Fig. H, I)
Maintain a minimum distance of 610 mm between the guard
and your feet as shown in FigureH.
With the trimmer on, angle it and swing side to side as shown
in FigureI.
WARNING: Keep the rotating string roughly parallel with
the ground (tilted no more than 30degrees). This trimmer
is not an edger. DO NOT TILT the trimmer so that the string
is spinning near a right angle to the ground. Flying debris
can cause seriousinjury.
Bump Feed Trimmer Line Feed
Your trimmer uses 2.0 mm diameter nylon line. Cutting line
will wear faster and require more feeding if the cutting is done
along sidewalks or other abrasive surfaces or heavier weeds are
beingcut.
As you use the trimmer, the string will get shorter due to wear.
Gently bump the trimmer on the ground while running at
normal speed and the line willfeed.
NOTE: Extending nylon line beyond the 350 mm swath will
negatively affect performance, runtime, and the life of the
trimmer due to potential of damaging motor. Doing so may
void thewarranty.
Helpful Cutting Tips
• Use the tip of the string to do the cutting; do not force string
head into uncutgrass.
• Wire and picket fences cause extra string wear, even
breakage. Stone and brick walls, curbs, and wood may wear
stringrapidly.
• Do not allow spool cap to drag on ground or othersurfaces.
• In long growth, cut from the top down and do not exceed
300mmhigh.
• Keep trimmer tilted toward the area being cut; this is the
best cuttingarea.
• The trimmer cuts when passing the unit from the left to
right. This will avoid throwing debris at theoperator.
• Avoid trees and shrubs. Tree bark, wood moldings, siding,
and fence posts can easily be damaged by thestring.
MAINTENANCE
Your DeWALT power tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regularcleaning.
WARNING:To reduce the risk of serious personal
injury, turn appliance off and remove battery before
making any adjustments or removing/installing
attachments or accessories. An accidental start-up can
causeinjury.
The charger and battery pack are notserviceable
.Maintenance Treatments (Fig. J)
• Keep the air intake slots30 clean to avoid overheating
(Fig.J).
• Your trimmer line can dry out over time. To keep your line in
top condition, store spare line in a plastic, sealable bag with
a tablespoon ofwater.
• Plastic parts may be cleaned by using a mild soap and a
damprag.
• The line cutter on the edge of the guard can dull over
time. It is recommended you periodically touch-up the
sharpness of the blade with afile.The line cutter on the edge
of the guard can dull over time. It is recommended you
periodically touch-up the sharpness of the blade with afile.

14
ENGLISH
Replacing Spool Assembly (Fig. A, N)
1. Rotate the spool housing10 until the hole31 in the
spindle plate aligns with notch32 in the motor housing.
Insert a screwdriver through the notch and into the hole, to
prevent the spindle fromturning.
2. Unscrew and remove the spool housing by turning the
spool grip cover29 clockwise.
NOTE: Do not try to remove the spool housing by turning
the spool housing10 .
3. Remove spindle plate34before installing a new spool.
Remove any dirt and grass from the motor housing and
spindleplate.
4. Install spindle plate34onto the spindle33, so the double
D shaped retaining nut on the spindle sits inside the base of
the spindleplate.
5. Align the spindle plate hole and notch, insert a screwdriver
back into the hole and thread the new spool housing
Reloading the Cutting Line (Fig. K–M)
WARNING: To reduce the risk of serious personal
injury, turn unit off and remove the battery pack
before making any adjustments or removing/
installing attachments or accessories, when
replacing line, or prior to cleaning. An accidental start-
up can causeinjury.
CAUTION:Use only DeWALT replacement spools
and line. Using any other manufacturer's line can
reduce performance, damage the trimmer or cause
personalinjury.
Your trimmer uses 2.0mm diameter line that is spiral-
shaped with smooth round edges. Do not use other size
lines. This can degrade performance, cause damage to the
unit orinjury.
CAUTION: To avoid appliance damage, if the cutting line
protrudes beyond the trimming blade, cut it off so that it
just reaches theblade.
Use only DeWALT replacementline.
1. Removebattery.
2. Cut a max of 6 m length of of 2.0mm trimmerline.
3. Align spool housing eyelets26 with the arrow27 on the
spool grip cover29 as shown in FigureK.
4. Thread one end of the trimmer line through an eyelet. Guide
the line through to the second eyelet and continue to pull
the line through until there are equal lengths of string on
each side of the spool housing as shown in FigureL.
5. Secure the spool cap from moving with one hand. Using
your other hand, wind the string onto the spool by
rotating the spool grip cover counterclockwise. Continue
winding until 130mm of string remain on each side of the
spoolhousing.
Protecting the Environment
Separate collection. Products and batteries marked
with this symbol must not be disposed of with normal
householdwaste.
Products and batteries contain materials that can
be recovered or recycled reducing the demand for raw
materials. Please recycle electrical products and batteries
according to local provisions. Further information is available at
www.2helpU.com.
Rechargeable Battery Pack
This long life battery pack must be recharged when it fails
to produce sufficient power on jobs which were easily done
before. At the end of its technical life, discard it with due care for
our environment:
• Run the battery pack down completely, then remove it from
the tool.
• Li-Ion cells are recyclable. Take them to your dealer or a
local recycling station. The collected battery packs will be
recycled or disposed of properly.
Folding for Storage or Transportation (Fig. P)
The string trimmer can be folded for storage or transportation.
To put the string trimmer in the folded position, please refer to
Extending and Folding thePole.
Replacing Guard (Fig. O)
WARNING: Never operate appliance without guard firmly
inplace.
1. Remove the four guard screws21.
2. Attach the new guard as described in the Attaching
Guardsection.
Use DeWALT replacement line Model No. DWO1DT801
orDWO1DT802.
When replacing the line, use only 2.0mm diameter line (Model
No. DT20650 & DT20651 are is recommended). Other sizes may
degrade performance or cause damage to thetrimmer.
counterclockwise. Securely tighten the new spool housing
onto the spindle33.

15
РУССКИЙ
Декларация о соответствии нормам ЕС
Директива по механическому оборудованию
Триммер
DCMST561
DeWALT заявляет, что продукция, описанная в разделе
«Технические характеристики», соответствует:
2006/42/EC, EN60335-1:2012 + A11:2014 + A13:2017 + A1:2019
+ A14:2019 + A2:2019 EN50636-2-91:2014.
2000/14/EC, Газонокосилка, Д ≤50см, Приложение VI
DEKRA Certification B.V.
Meander 1051 / P.O. Box 5185
6825 MJ ARNHEM/6802 ED ARNHEM, Нидерланды
Идентификационный № уведомленного органа: 0344
Уровень акустической мощности в соответствии с
директивой 2000/14/EC
(Статья 12, Приложение III, Д ≤50см :
LPA (измеренный уровень звукового давления) 79дБ(A)
погрешность (K) = 2,1 дБ(A)
LWA (гарантированная акустическая мощность) 96дБ(A)
Эти продукты также соответствуют Директивам 2014/30/EU и
2011/65/EU. За дополнительной информацией обращайтесь
в компанию DeWALT по адресу, указанному ниже или
приведенному на задней стороне обложки руководства.
Нижеподписавшийся несет ответственность за составление
технической документации и составил данную декларацию
по поручению компанииDeWALT.
Маркус Ромпель
Вице-президент отдела по разработке и производству, PTE-
Europe
DeWALT, Richard-Klinger-Straße 11,
D-65510, Idstein, Германия
15.10.2020
значительному снижению уровня воздействия
вибрации в течение всего рабочего периода.
Определите дополнительные меры техники
безопасности для защиты оператора от
воздействия шума и/или вибрации, а именно:
поддержание инструмента и дополнительных
принадлежностей в рабочем состоянии, создание
комфортных условий работы (соответствующих
вибрации), хорошая организация рабочего места.
Значение воздействия шума и/или вибрации, указанное в
данном справочном листке, было получено в соответствии
со стандартным тестом, приведенным в EN50636-2-91, и
может использоваться для сравнения инструментов. Кроме
того, оно может использоваться для предварительной
оценки воздействия вибрации.
ВНИМАНИЕ: Заявленное значение воздействия
шума и/или вибрации относится к основным
областям применения инструмента. Однако, если
инструмент используется для различных целей, с
различными дополнительными принадлежностями
или при ненадлежащем уходе, то уровень шума и/или
вибрации может измениться. Это может привести
к значительному увеличению уровня воздействия
вибрации в течение всего рабочего периода.
При расчете приблизительного значения уровня
воздействия шума и/или вибрации также
необходимо учитывать время, когда инструмент
выключен или то время, когда он работает
на холостом ходу. Это может привести к
DCMST561
Напряжение Впост. тока 18
Великобритания и Ирландия Впост. тока 18
Тип 2
Тип батареи Ионно-литиевая
Выходная мощность Вт 400
об/мин. 0–4600/
0–6000
Ширина скашивания мм 350
Ширина см 36
Вес (без аккумуляторной батареи) кг 3,6
Значения шума и вибрации (сумма векторов в трех плоскостях) в
соответствии с EN50636-2-91:2014
LPA (уровень звукового давления) дБ(A) 79
K (погрешность для заданного уровня
мощности)
дБ(A) 2,1
LWA (уровень акустической мощности) дБ(A) 93,5
K (погрешность для заданного уровня
мощности)
дБ(A) 2,6
Значение вибрационного воздействия a
h
= м/с2 3,9
Погрешность К = м/с2 1,5
Поздравляем!
Вы приобрели инструмент DeWALT. Многолетний опыт,
тщательная разработка изделий иинновации делают
компанию DeWALT одним из самых надёжных партнеров для
пользователей профессиональногоэлектроинструмента.
Технические характеристики
Русский (перевод с оригинала)
ТРИММЕР
DCMST561

16
РУССКИЙ
Правила техники безопасности
ВНИМАНИЕ: Для снижения риска возникновения
пожара, поражения электрическом током,
получения травм и материального ущерба при
использовании инструмент с питанием от сети
нужно обязательно соблюдать основные меры
предосторожности, включая следующее.
ВНИМАНИЕ: При использовании инструмента
обязательно соблюдайте правила техники
безопасности. Для Вашей собственной
безопасности и безопасности окружающих
прочитайте данное руководство, прежде чем
приступить к работе с инструментом. Сохраните
руководство для дальнейшего использования.
• Прежде чем приступить к работе с инструментом,
внимательно прочитайте настоящее руководство.
• В данном руководстве описано предусмотренное
применение. Использование каких-либо
принадлежностей или насадок, а также выполнение
каких-либо операций, отличных от рекомендованных в
данном руководстве, может привести к травмам.
• Сохраните данное руководство для справки в будущем.
ВАЖНО
ВНИМАТЕЛЬНО ПРОЧИТАЙТЕ ПЕРЕД
ИСПОЛЬЗОВАНИЕМ
СОХРАНИТЕ ДЛЯ ИСПОЛЬЗОВАНИЯ В
БУДУЩЕМ
Правила безопасной эксплуатации
Обучение
a ) Внимательно прочитайте инструкции.
Ознакомьтесь со средствами управления и
правильным использованием инструмента.
b ) Не позволяйте детям или лицам, незнакомым
с данными инструкциями, использовать
инструмент. Местные нормы могут налагать
ограничения на возраст оператора.
c ) Учитывайте, что оператор или пользователь
несет ответственность за несчастные случаи
или опасности, создаваемые другим лицам или
их собственности.
aВНИМАНИЕ: Во избежание риска получения травм
ознакомьтесь синструкцией.
Обозначения: правила техники
безопасности
Ниже описывается уровень опасности, обозначаемый
каждым из предупреждений. Прочитайте руководство
иобратите внимание на данныесимволы.
ОПАСНО: Обозначает опасную ситуацию, которая
неизбежно приведет ксерьезной травме или
смертельному исходу, вслучае несоблюдения
соответствующих мербезопасности.
ВНИМАНИЕ: Указывает на потенциально опасную
ситуацию, которая, вслучае несоблюдения
соответствующих мер безопасности,
может привести ксерьезной травме или
смертельномуисходу.
ПРЕДУПРЕЖДЕНИЕ: Указывает на потенциально
опасную ситуацию, которая, вслучае несоблюдения
соответствующих мер безопасности может
стать причиной травм средней или легкой
степенитяжести.
ПОЯСНЕНИЕ: Указывает на практики,
использование которых не связано
сполучением травмы, но если ими пренебречь,
могут привести кпорчеимущества.
Указывает на риск поражения электрическимтоком.
Указывает на рисквозгорания.
Аккумуляторные батареи
Зарядные устройства/время зарядки (мин)
Кат. №
пост.тока
Вес
*Код даты 201811475B или новее
**Код даты 201536 или новее
Аккумуляторные батареи Зарядные устройства/время зарядки (мин)
Кат. № Vпост. тока Ah Вес (kg) DCB104 DCB107 DCB112 DCB113 DCB115 DCB118 DCB132 DCB119
DCB546 18/54 6.0/2.0 1.05 60 270 170 140 90 60 90 X
DCB547 18/54 9.0/3.0 1.46 75* 420 270 220 135* 75* 135* X
DCB548 18/54 12.0/4.0 1.44 120 540 350 300 180 120 180 X
DCB181 18 1.5 0.35 22 70 45 35 22 22 22 45
DCB182 18 4.0 0.61 60/40** 185 120 100 60 60/40** 60 120
DCB183/B 18 2.0 0.40 30 90 60 50 30 30 30 60
DCB184/B 18 5.0 0.62 75/50** 240 150 120 75 75/50** 75 150
DCB185 18 1.3 0.35 22 60 40 30 22 22 22 X
DCB187 18 3.0 0.54 45 140 90 70 45 45 45 90
DCB189 18 4.0 0.54 60 185 120 100 60 60 60 120
*Код даты 201811475B или новее
**Код даты 201536 или новее

17
РУССКИЙ
Подготовка к эксплуатации
a ) Перед использованием всегда проверяйте
инструмент визуально на предмет
поврежденных, отсутствующих или
утерянных кожухов или щитков.
b ) Не используйте инструмент, если рядом
присутствуют посторонние, особенно дети,
или домашние животные.
Эксплуатация
a ) Всегда надевайте защитные очки и обувь
на толстой подошве при использовании
инструмента.
b ) Избегайте работы с инструментом в плохих
погодных условиях, особенно при риске удара
молнии.
c ) Используйте инструмент только днем или при
хорошем искусственном освещении.
d ) Не используйте инструмент с поврежденным
кожухами и щитками или без кожухов и
щитков.
e ) Включайте электродвигатель только
когда руки и ноги находятся на безопасном
расстоянии от режущих частей.
f ) Не пытайтесь дотянуться до удаленных
поверхностей и всегда сохраняйте устойчивое
положение, особенно на уклонах. Ходите
пешком, не бегите.
g ) Всегда отсоединяйте инструмент
от источника питания (например,
вынимайте вилку из розетки, вынимайте
предохранительное устройство или съемную
аккумуляторную батарею)
• когда инструмент остается без присмотра;
• перед удалением засорения;
• перед проверкой, чисткой или обслуживанием
инструмента;
• после удара об инородный предмет;
• при наличии ненормальных вибраций в
инструменте.
h ) Остерегайтесь травмирования рук и ног
режущими частями.
i ) Всегда удостоверяйтесь, что вентиляционные
отверстия чисты от загрязнений.
Обслуживание и хранение
a ) Отсоединяйте инструмент от источника
питания (например, вынимайте вилку из
розетки, вынимайте предохранительное
устройство или съемную аккумуляторную
батарею) перед выполнением технического
обслуживанием или чисткой.
b ) Используйте только рекомендованные
производителем запасные части и
дополнительные принадлежности.
c ) Регулярно проверяйте и выполняйте
обслуживание инструмента. Ремонт
инструмента должен производиться
авторизованным специалистом по ремонту.
d ) Когда инструмент не используется, храните в
недоступном для детей месте.
Дополнительные меры безопасности при
работе с триммерами
ВНИМАНИЕ: Режущие части продолжают
вращаться после выключения электродвигателя.
• Надевайте длинные брюки, чтобы защитить ноги.
• Перед использованием инструмента убедитесь,
что в области под скос нет палок, камней,
проволоки и других препятствий.
• Используйте инструмент только в вертикальном
положении, режущей леской к земле. Не включайте
инструмент в каком-либо другом положении.
• При использовании инструмента передвигайтесь
медленно. Помните, что свежескошенная трава
может быть влажной и скользкой.
• Не работайте на крутых уклонах. Работайте по
поверхности уклона, а не вверх и вниз.
• Не пересекайте гравийные дорожки или дороги с
работающим инструментом.
• Не прикасайтесь к режущей леске включенного
инструмента.
• Не ставьте инструмент на землю до тех пор, пока
режущая леска не остановится полностью.
• Используйте только режущую леску
соответствующего типа. Не используйте
металлическую режущую леску или рыболовную леску.
• Соблюдайте осторожность, не касайтесь лезвия
для обрезания лески.
• Всегда держите руки и ноги на безопасном
расстоянии от режущей лески, особенно при
включении электродвигателя.
• Проверяйте инструмент на предмет повреждений
перед каждым использованием и после каждого
столкновения и выполняйте ремонт по
необходимости.
• Будьте осторожны, чтобы не получить травм
от какого-либо из инструмент для обрезки
лески. После выдвижения новой режущей лески всегда
возвращайте инструмент в нормальное рабочее
положение перед тем, как его включить.
• При работе рядом с детьми необходимо особое
внимание.
• Данный инструмент не предназначен для
использования несовершеннолетними или лицами
с ограниченными возможностями, если они не
находятся под присмотром.
• Инструмент не предназначен для игр.
• Использовать только в сухом месте. Не допускайте
попадания влаги в инструмент.
• Не погружайте инструмент в воду.

18
РУССКИЙ
• Запрещается вскрывать корпус. Внутри
инструмента нет деталей, обслуживаемых
пользователем
• Не используйте инструмент во взрывоопасной
среде, например, при наличии горючих жидкостей,
газов или пыли.
• Если инструмент хранится или
транспортируется в транспортном средстве,
его нужно поместить в багажник или закрепить
во избежание перемещения в результате резкого
изменения скорости или направления движения.
• Если инструмент не используется, его нужно
хранить в сухом, хорошо вентилируемом
помещении, недоступном для детей.
• Дети не должны иметь доступа к помещенным на
хранение инструментам.
Безопасность окружающих
• Данный инструмент не предназначен для
использования лицами (включая детей) с
ограниченными физическими, сенсорными
или ментальными возможностями, а также
лицами без достаточного опыта и знаний, если
только они не делают этого под руководством
лица имеющего соответствующий опыт и
отвечающего за их безопасность.
• Не позволяйте детям играть с данным
инструментом.
• Если инструмент хранится или
транспортируется в транспортном средстве,
его нужно поместить в багажник или закрепить
во избежание перемещения в результате резкого
изменения скорости или направления движения.
• Если инструмент не используется, его нужно
хранить в сухом, хорошо вентилируемом
помещении, недоступном для детей.
• Дети не должны иметь доступа к помещенным на
хранение инструментам.
Использование удлинительного кабеля
Используйте удлинитель только вслучаях крайней
необходимости. Используйте только утвержденные
удлинители промышленного изготовления, рассчитанные
на мощность не меньшую, чем потребляемая мощность
зарядного устройства (см. Технические характеристики).
Минимальное поперечное сечение провода электрического
кабеля должно составлять 1мм2; максимальная длина 30м.
При использовании кабельного барабана всегда полностью
разматывайтекабель.
Важные инструкции по технике безопасности
для всех зарядных устройств
СОХРАНИТЕ НАСТОЯЩЕЕ РУКОВОДСТВО. Вданном
руководстве содержатся важные инструкции по технике
безопасности для совместимых зарядных устройств (см.
Техническиехарактеристики).
• Перед тем как использовать зарядное устройство,
внимательно изучите все инструкции
ипредупреждающие этикетки на зарядном
устройстве, батарее иинструменте, для которого
используетсябатарея.
ВНИМАНИЕ: Опасность поражения электрическим
током. Не допускайте попадания жидкости
взарядное устройство. Это может привести
кпоражению электрическимтоком.
ВНИМАНИЕ: Рекомендуется использовать
устройство защитного отключения (УЗО) стоком
утечки до 30мA.
ВНИМАНИЕ: Опасность ожога. Во избежание травм,
следует использовать только аккумуляторные
батареи производства . Использование батарей
другого типа может привести квзрыву, травмам
иповреждениям.
ПРЕДУПРЕЖДЕНИЕ: Не позволяйте детям играть
сданнымустройством.
ПОЯСНЕНИЕ: Вопределенных условиях, при
подключении зарядного устройства кисточнику
питания, может произойти короткое замыкание
контактов внутри зарядного устройства
посторонними материалами. Не допускайте
попадания вполости зарядного устройства таких
токопроводящих материалов, как стальная
стружка, алюминиевая фольга или другие
металлические частицы ит.п. Всегда отключайте
зарядное устройство от источника питания,
если внем нет аккумуляторной батареи. Всегда
отключайте зарядное устройство от сети перед
тем, как приступить кочистке инструмента
• НЕ ПЫТАЙТЕСЬ заряжать батареи спомощью
каких-либо других зарядных устройств, кроме
тех, которые указаны вданном руководстве.
Зарядное устройство ибатарея предназначены для
совместногоиспользования.
• Эти зарядные устройства не предназначены
ни для какого другого использования, помимо
Зарядные устройства
Зарядные устройства не требуют регулировки
имаксимально просты виспользовании.
Электробезопасность
Электродвигатель рассчитан на работу только при одном
напряжении сети. Необходимо обязательно убедиться
втом, что напряжение источника питания соответствует
указанному на шильдике устройства. Необходимо также
убедиться втом, что напряжение работы зарядного
устройства соответствует напряжению всети.
iЗарядное устройство оснащено двойной
изоляцией всоответствии стребованиями
EN60335; поэтому провод заземления
нетребуется.
Вслучае повреждения кабеля питания его необходимо
заменить специально подготовленным кабелем, который
можно приобрести всервисных центрах.