Dewetron DEWE3-M8s Use and care manual

DEWE3-M8s
TECHNICAL REFERENCE
ISO 9001
EN ISO 14001

Copyright © DEWETRON GmbH

Preface
3
Preface
Thank you!
-
Intended use
-

TABLE OF CONTENTS
Preface.............................................3
Thank you!............................................................3
Intended use .........................................................3
Safety ..............................................6
Safety instrucons ................................................6
6
7
7
8
Standards and norms ............................................8
Typographic convenons.......................................8
8
8
9
General information........................10
Environmental consideraons .............................10
Problemac network stacks ................................10
Warranty informaon .........................................10
Legal informaon................................................10
Prinng history ...................................................11
System setup .................................12
Key facts .............................................................12
System specicaons ..........................................12
Dimensions* .......................................................13
Block diagram .....................................................14
Connections and ports....................15
Power supply ......................................................16
Sync and digital interfaces...................................20
USB 3.2 interface connectors...............................26
Display port & HDMI connectors .........................26
Chassis terminal..................................................26
Gigabit Ethernet LAN connectors.........................26
EPAD connector (LEMO) ......................................27
TRION/TRION3 series module slots .....................27
Intake vents with lter pads................................27
SSD drive bays.....................................................27
Labels .................................................................28
Opons and accessoires......................................28
Working with the system................30
Hardware ............................................................30
33
36
Soware .............................................................36
36
sensors 37
38
Designing the measurement screen 38
Recording 39

TABLE OF CONTENTS
Synchronizaon ..................................................41
Maintenance and service ................45
Service intervals..................................................45
Cleaning the system ............................................45
Cleaning the lter pad.........................................45
Replacing the lter pad .......................................46
System recovery..................................................47
Training...............................................................47
Calibraon ..........................................................47
Support...............................................................47
Service and repairs..............................................47
Updates ..............................................................48
Certificates of conformity...............49
CE cercate of conformity .................................49
Conformity to IEC 61000-4-30..............................50

Safety
6
Safety
Safety instructions
General safety instructions
`-
`
`
`
`
`
`
–
–
–
–
`
`-
`
`
`-
`-
`
`
`
`
`-
`

Safety
7
Electrical safety instructions
`
`
`
-
`
`
`
`
`
`
`
`
`
`
`
`
Ambient safety notices
`
-
`
`-
– Moisture or high humidity
–
–
–
`
`
`

Safety
8
Safety notices during operation
`
`
Standards and norms
EN 61326-3-1:2008
-
-
-
-
Typographic conventions
Safety and warning notices
WARNING
!
Indicates a hazardous situaon that, if not avoided, could result in death or serious injury.
CAUTION
!
Indicates a hazardous situaon that, if not avoided, could result in minor or moderate injury.
Notices
NOTICE
INFORMATION

Safety
9
Symbols
!
3

General information
General information
Environmental considerations
`
-
`
Problematic network stacks
-
Warranty information
Legal information
Restricted rights legend
DEWETRON GmbH
Legal disclaimer

General information
-
Printing history
Copyright © DEWETRON GmbH

SyStem SetuP
System setup
Key facts
`
`
`
`
System specifications
DEWE3-M8s
General
8
Data storage
–
–
Power supply
Input
– DC DC
–
–
–
System
Computer
Environmental specicaons
Storage temperature
Humidity
Tab. 1: System specicaons DEWE3-M8s

SyStem SetuP
DEWE3-M8s
Shock and vibraon tests
Shape Sine
density
Tab. 1: System specicaons DEWE3-M8s
Dimensions*
Fig. 1: Dimensions DEWE3-M8s

SyStem SetuP
Block diagram
Motherboard
OS
Empty
TRION3
SYNC bus
HDMI
Motherboard
Gen3
Temperature sensors
interface
TRION3
EN
Chassis GND
GND
output
Fig. 2: Block diagram DEWE3-M8s

connectionS and PortS
Connections and ports
13 19181412 1615
2
4
2
5
6
3
117 109 20
22
21
8
17
23
24
1
Fig. 3: Connecons and ports DEWE3-M8s
1.
2.
3.
4.
5.
6. HDMI connector
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21. Int
22.
23.
24.

connectionS and PortS
Power supply
Power supply input 24..32 V
2
124..32 VDC
GND
Fig. 5: Pin assignment for power supply input connector 24..32 V
Internal DC power supply
450 W DC power supply
Input
–
–
–
– Connector
DCDC
DC
Tab. 2: Specicaons internal 450 W DC power supply
External AC/DC power supply
IN
DC OUT
Connector type
+-
Fig. 6: External AC/DC power supply
450 W AC/DC power supply
Input
–
–
– Current
Output
–
– Current
–
DC
Tab. 3: Specicaons external 450 W AC/DC power supply

connectionS and PortS
Power supply input 11..32 V
(7) (3)-
INFORMATION
Example
(2)
(6)
Power supply output for accessories 12 V
DC
+12 V
DC
GND
Fig. 7: Pin assignment for accessoies power supply output
Mang connector:
`
`
Power on/off push button and status LEDs
2
3
4
1
Fig. 8: Power on/o push buon and status LEDs
1.
2.
3.
4.
Power on/off push button
(11)

connectionS and PortS
SSD activity LED
NOTICE
Battery status LED
Color/mode Status
GREEN (solid)
GREEN (ashing)
YELLOW (solid)
YELLOW (ashing) Charging suspended
Color/mode Status
RED (solid)
RED (ashing)
NONE (o)
Tab. 4: Baery status LED indicaon
System status LED
Colour Status Comment
GREEN (solid)
GREEN (ashing)
YELLOW (ashing)
RED (solid)
RED (solid)
Tab. 5: System status LED indicaon
NOTICE
-
Buzzer
Beep Status
Tab. 6: Buzzer

connectionS and PortS
Ignition connector
4
3
1
2Ignion-
Ignion+
GND in
n.c.
Fig. 9: Ignion connector
-
INFORMATION
Battery bay
-
Baery (oponal) on page 19
Battery (optional)
-
NOTICE
LCD indicator Status
Tab. 7: Baery status

connectionS and PortS
NOTICE
-
Installing/removing a battery on page 35
Sync and digital interfaces
Overview
Engine
IRIG in
connector
Camera trigger
Counter in
SYNC mode
DEWE3
Engine
Data
processing
DEWE3 sync bus
DEWE3 sync bus
Data bus
Data bus
Data bus
Engine
Counter
Fig. 10: Signal roung
Active sync LEDs
Acve mode LEDs
-
Tab. 8: Acve sync LEDs
SYNC I/O interface (TRION SYNC-BUS)
-
SYNC OUT SYNC IN
Tab. 9: LED indicaon
Table of contents
Other Dewetron Computer Hardware manuals