Diagcar ENIGMA User manual

E N I G M A U S E R M A N U A L
NISSAN MICRA FROM 2003 V2
FOR MORE INFORMATION
Call 0034 983 359 787 or visit www.enigmatool.com
DIAGCAR ELECTRONICS S.L. Ebanistería 1A, 47610 Zaratán, Spain
PHOTO 1: Solder cables according to the colors like shown on the photo above.
DASHBOARD PHOTO:
REQUIRED CABLE(s):
C7
FOLLOW THIS INSTRUCTION STEP BY STEP:
1. Remove the dashboard and open it carefully.
2. Remove the back side of the dash to get to the main board and identify it.
3. Solder cable C7 to the points on the back of the dash mainboard as shown on
PHOTO1.
4. Make sure that the connection you made is secure.
5. Use the EDITOR to save memory backup data.
6. Press the READ KM button and check if the value shown on the screen is correct.
7. Now you can use the CHANGE KM function.

E N I G M A U S E R M A N U A L
NISSAN MICRA FROM 2003 V2
FOR MORE INFORMATION
Call 0034 983 359 787 or visit www.enigmatool.com
DIAGCAR ELECTRONICS S.L. Ebanistería 1A, 47610 Zaratán, Spain
LEGAL DISCLAIMER:
DIAGCAR ELECTRONICS S.L. does not take any legal
responsibility of illegal use of any information stored in this
document. Copying, distributing or taking any action in reliance
with the content of this information is strictly prohibited.