CrimeStopper SV-9145 User manual

0
ReplacementRearViewMirrorwithbuilt-in
4.5inLCD Monitor&Hands-Free Phone
Interface
Model:SV-9145
Installation Manual
Features:
•RearviewMirrorwith4.5"LCD
•AuxiliaryVideoInput
•RearviewCameraInput
•PAL/NTSCsystemcompatible
•CellularPhoneHandsFree Input
•HandsFree MicrophoneBuilt-in
1
Cautions!
The productisintended toassistinsafedriving and toallow
the driver
tohaveabroaderrearviewwhilebacks the vehicle.You,asadriver,aresolely
responsibleforthe safeoperation ofyourvehicleand the safetyofyourpassengers
accordingtothecountryand theirlocaltrafficregulations.Donotuseanyfeatures
ofthissystemtothe extentitdistractsyou fromsafedriving.Yourfirstpriority
whiledriving shouldalways be the safeoperation ofyourvehicle.
1.Thisproductutilizeshigh voltage.Anyunauthorizedmodifications
ordamage tothe productsmayresultinelectricalshock.Handleall
componentswithcare.Inspectregularlyfordamage
tocomponentsand cabling.
2.You mustbe responsibletoensurethatthe installation ofthisproduct
doesnotvoidoraffectthe vehiclemanufacturer’swarranty.MediaView
TechnologiesCorporation,oritsbranchesarenotliableinfull orinpartfor
improperinstallation resulting
inloss ordamagetoyourproperty,orforvoiding all orpartof
the vehiclemanufacturer’swarranty.
3.Donotapplyexcessiveforcetoanyofthe componentscontained withinthis
kit. Excessiveforceused before,during
orafterinstallation thatresultsinadamaged ornon-functionalpartshall void
all warranties.
4.Pleasefollowthe procedurefromthisinstallation manual.Improper
installation ormodification ofthisproductshall void
all warranties.
5.You areadvised nottodisplaythe externalvideo inputwhiledriving when
using the handsfreefeature,you shouldobservethe road situation carefully
toavoidtrafficaccidents.
6.Makeselectionsonlywhen stopped.Pleasedon’tuseremotecontroller
when driving.

2
Packing list
The RearviewmirrorModelSV-9145 consistsofthe following
items:
1.RearViewMirror-1
2.ControlBox-1
3.FilterBox-1
4.ControlBoxMonitorCable-1
5.MobilePhone HandsFree CablePlug-1
6.MobilePhone AdhesiveMagneticSeat-1
7.Audioand video cable-1
8.Video CableAdapter-1
3
Installation Instructions
1.MounttheMirror/Monitor
a)Removethe originalfactorymirror.(Donotuseexcessiveforcewhen
removing factorymirror.)Check tomakesurethatthe factorymirror
mountyou removematchesthe mirrormounton the replacementmirror.
b)Slide the receiving bracketon the back ofthe newmirrorstalkontothe
windshield-mounting button.Movethe bracketback and forthuntil
completelyseated.
c)Tightlythe T-20 mounting bracketscrew.
2.Install TheControlbox,FilterBox
Connectthe controlboxcabletothe rearviewmirror/monitorcable.
Routthe monitorcablebehind the headlinerofthe windshield.And then
connect4wiresinthe following manner:
Redwire-Ignition Switch(12 voltwhen vehicleisIgnition)
Black wire-Chassisground (negative)
Greenwire-Reverselightswitch(12 voltwhen vehicleisinthe reversegear)

4
Yellowwire-Parking brakeswitch(12 voltwhen vehicleisinthe parking state)
WARNING:Observepolaritywhen connecting the cables.the cablemustnotbe
reversed ofmodified.
Figure3
4.SignalInputs
The signalinputconnectionsforthe systeminclude:
RearCamera:Plug the RJ11 cameracableend intothe controlbox
AVin-1location,routethe cabletothe rearcameraand plug the 4-pin
connectorintocamera4pinconnector.Userscan see the rearviewcameraimage
when the carisshifted intoreverse.
5.Controlsand Indicators
5
Figure4
Figure3And Figure4showsthefunction ofrearviewmirror.
A:4.5"LCD panel;
B:RearviewMirror;
C:SW1;
D:SW2;
E:LCD Brightness Control;
F:PowerIndicator(Red when Powerison);
G:InternalSpeaker;
H:Volumecontrol;
I: Internalmicrophone .
SW1AND SW2
1).VehicleReversing:
Nofunction
2).VehicleDriving:
SW1:When the vehicleisparking,press the button will turnon or
off the displaymonitor.
SW2:Press the button will displayoroff the image fromthe
rearviewcamera.
6.Operation
1)HowtoturntheRearviewMirroron/off
A.The systemisautomaticallyon when ignition isturned on.
B.The systemturnsoff when ignition isturned off.
4

6
2)
HowtoviewtheRear-observation CameraImage
A.The LCD can displaythe rearviewcameraimage automatically
wheneverthe vehicleisshifted intothe reversegear.
B.When press SW2,the LCD can displaythe rearviewcamera
image.
C.Press SW2again,the LCD can automaticallyswitchback tothe
originalsetting.
3)VolumeControl
A.The switchHisadjusted forcontrolvolume.
B.The switchison the rightbottomofthe mirror.
4)LCD MonitorBrightness Control
A.The brightness adjustmentcontrolisswitchE.
B.The switchison the left bottomofthe rearviewmirror.
C.Rotating the wheeltothe rightcan decreasethe brightness.
D.Rotating the wheeltothe left can increasethe brightness.
5)Howtoplay anexternalaudioorvideosignal
A.Besurethe externalaudioorvideo deviceisengaged.
B.Press SW1toturnon/off the LCD and the externalsignalinput.
NOTE:Thefunction canbeusedonlywhenthevehicleisparked.
6)CellularPhoneHands-Free Operation
A.Firstly,attachthe round metaladhesivedisc tothe back ofyour
mobilephone whileitnotinuse;secondly,attachthe mobile
phone adhesivemagneticmounttoyourselected spotofthe
7
dasharea;finally,placethe cell phone withthe metaldiscover
the centerofthe magneticseat, itcan be attached tightlytothe
dash.
B.Plug inthe 2.5mm handsfree cableintoyourcell phone headset
jack.The otherend ofthiscableshouldbe connected tothe
mirrorjack.
NOTE:Anadaptermustbeusedifyourcell phonehasn’ta
2.5mm headphonejack.Therearen’tanycell phones
compatiblewiththismirrorhands-free circuit.

8
Specification
General
PowerSupply12VDC
PowerConsumption <12W
CurrentDraw<650mA
Video Input1Vp-p/75 Impedance
AudioInput<=1V
AudioPowerOutput0.5W×2(16O)
Operating TemperatureRange 0?to50?
Display System
Screen 4.5”TFT ColorLCD
Brightness 400 cd/?
ContrastRatio150 :1
BacklightLife10000 hours
Resolution 960×234
Video FormatPAL/NTSCautodetect
DisplayFormat16 :9
Though yourRearviewmirrorrequireslittlecare,you can still maintainits
condition and performancebyfollowing the proceduresbelow.
•Keep yoursystemawayfromexcessivemoisture,extremeheator
cold,and magneticfields.
•Keep liquidsawayfromthe displayand mirror.
•Toavoiddamage,do notplaceexternaldevicesorotherobjects
on the top ofthe mirror.
•Occasionallywipe the rearviewmirrorsetwithasoft dampcloth.
9
•Occasionallyclean the surfaceofthe mirrorwithasoft cloth.(The
clothcan moisten withwaterorwindowcleaner.)

10
Troubleshooting
SymptomsSolutions
The ON/OFF signallight<E>
isnoton afterthe caris
started?
1.Check the installation-wiring diagram.
2.Ensurethatthe parallelred and black line
fromthe controlboxisconnected properly.
3.Check for12 voltson the blue wirewhilethe
ignition on.
Novideo signalappearswhile
reversing the car?
1.Check the rearviewCameralens.
2.Check the rearviewCamerawiring and
connection.
3.Check the cablefromthe rearviewmirroris
connected tothe controlbox.
4.Check outthe wireconnection (tofind out
whetherthe system’sreversewirecableis
connected tothe reverseswitchgearofthe
car)
Video image isnotsharp
enough? Clean the lensofthe camera.
11
Illustration ofConnections
Fig
ure6
Ignition

12
CRIMESTOPPER
SECURITYPRODUCTS,INC.
1770 S.TAPOSTREET
SIMIVALLEY,CA.93063
TECH SUPPORT:
PHONE:[phone]
FAX:[phone]
WWW.CRIMESTOPPER.COM