Diamond RFE 12 Operation manual

Mod: FSM-12ET/N
Production code: RFE 12
05/2018

INSTRUCTIONS FOR USE AND
INSTALLATION FRYER RFE 12
Made in France
Octobre 2015

RFE 12
Congratulations for the acquisition of this upmarket appliance made in France. You chose an
appliance which alloys the best technical qualities with a big user-friendliness. We wish you
the biggest contentment.
I SECURITY INSTRUCTIONS
Please respect these instructions scrupulously to avoid any
risk of fire, electric shock, scald or other wounds and dam-
age.
During the use of this appliance, fundamental circumspec-
tion of security must always be noticed, such as:
-Never leave the appliance working without any watch
ing.
-Take into account the instructions to be systematically
kept with the appliance.
-Install the appliance always in instructions respect. A
10 cm distance minimum with the partition or the wall is
necessary.
-Protect the appliance from direct light of the sun, frost
and humidity.
-Never leave the appliance within the reach of children
or disabled persons without surveillance during or after
use; the oil remains hot for a long time.
-Ensure that only trained personnel operate the appli-
ance.
-Never move the appliance when it is working or still
hot.
-Check that the appliance is definitely off before con-
necting it up or disconnecting it. 11

-Do not touch the hot surfaces of the appliance: always
use handles and control knobs.
-Do not use the appliance for other functions than deter-
mined use.
-Do not leave the cord of electrical feeding in the con-
tact of hot surfaces.
-The appliance should not be used close to combustible
materials.
-Entrust compensations only to a skilled person.
-Use only spare parts of origin.
-To avoid any damage on the heating element, do not
use solid fats.
-Never warm your machine up if the heating elements
are not plunged into oil, you may cause a fire.
-Never plug in your deep fryer before having filled in
the container with oil.
-The metal parts of the deep fryer become very hot dur-
ing use.
-Never exceed the maximum capacity of your fryer
which is of 2.5kg.
-Never place the lid on the deep fryer while it is in use.
-Never put the control unit in water. Remove it before
washing the rest of your deep fryer.
-After cleaning, ensure that all parts are completely dry
before using the appliance.
-If the cord is harmed, it must be replaced by the pro-
ducer, his after sale service or persons of similar skills to
avoid any risk.
12

-Never leave your fryer working without any watching.
-Do not plunge foods made with an important humidity,
you risk a boiling over; the same for bigger foods.
-Use caution when removing the electrical module; the
temperature sensors and the element may be very hot.
-Use only the control unit supplied with the machine.
-Watch out for steam during use.
-Whatever the fryer is cold or hot, the oil level has to be
always between the minimum and maximum levels
placed on the left and right sides of the container( maxi
mum level “large line”, minimum level “small line”)
-The use of old oil may cause an important risk of strong
boiling, of spatters or fire. It is recommended to change it
as soon as it becomes brown.
-Never put water on some ardent oil, but cover the fryer
with the lid.
-Always keep the lid near the fryer.
-Always unplug your deep fryer after use.
II CONTENTS OF CARDBOARD PACKAGING
Device: a fryer
Accessories: - One basket with insulated handle
-One lid + handle
-The present note
See exploded views for at the end of the document
III CONFORMITY OF USE
Use the device only to cook and fry some food.
IV WAY OF FUNCTIONING
This modular high power fryer enable you to increase your production of French fries per hour
regarding to other models with normal power.
13

It is equipped with a stainless steel container, with a cold zone insuring a longer using of the
oil. Indeed, the scraps are going to lay down the bottom of the container, where the oil tem-
perature is at the minimum, and do not carbonize. The draining is safe thanks to the tap
placed on the front of the fryer.
The setting of the temperature is made by the thermostat/commutator.
To turn on your fryer and preheat the oil, set the thermostat control knob (n°3 on picture) on
the desired heating power. The orange pilot light (n°1 on picture) ignites until the desired
temperature is reached.
Thermostatic pilot light On/off pilot light
Thermostat Commutator
V FUNCTIONING / MANIPULATION
a) Installation / assembly:
-Unpack carefully the device of its packaging.
-Remove the protective film around the machine.
-Screw up the handle on the lid.
-Place the fryer on a plane and heatproof surface.
-Never place the device near a wall or near a partition makes of combustible materials even
if it is very well isolated.
-A distance of minimum 10 cm with the partition or the wall is necessary.
-Place the product to enable easy access to the plug.
-Then place all the accessories.
-Keep the lid near the fryer to enable you covering it after use or in case of fire.
3
12
4
14
23
4
1

b) First starting:
Before the first use, wash the machine and all accessories with hot soapy water and dry them
with a soft cloth.
Connection of the device
-Check that the tension and the frequency of the electricity network suit to the values indi-
cated on the descriptive plate.
-Check that neither the cord nor the plug are damaged
-Make sure that every control knob is positioned on 0.
-Unwind completely the electric power cable and connect it in a plug connected with the
earth.
-The device is connected.
The machines intended to be linked in a permanent way with the fixed pipes must be provid-
ed with a device of disconnection.
The equipotential connection marked by this symbol must be linked with the
equipotential conductive connection of your installation.
NB: in case of connection of the device in a plug without earth protection or directly on the
electricity network, confide its connection to a qualified person .
c) Use of device :
Putting on
-Make sure that the draining tap is closed.
-Insert the control unit into the slot being sure that it is pushed in all the way. The deep
fryer will not function if the control unit is improperly inserted, the microswitch will
prevent operation.
Command and display Function
Thermostat (n°3 on picture) Temperature setting
Tripolar safety thermostat Automatic stop in case of overheating
Microswitch Automatic stop in case of improper posi-
tioning of the control unit
Commutator (n°4 on picture) On/off. It is linked to thermostat
Orange pilot light (n°1 on picture) Oil is warming (pilot light on)
Oil is hot (pilot light off)
Green pilot light (n°2 on picture) Machine is on (pilot light on)
Machine is off (pilot light off)
15

-Pour oil into the container when heating elements are cold. The oil level must be be-
tween the MIN and MAX marks.
-Turn the thermostat control knob (n°3 on picture) to the desired position.
-When the orange pilot light is off, your deep fryer is ready for cooking.
-Fill the basket in and plunge it slowly into the oil.
-When cooking is finished, lift the basket and set it on its stand.
Safety thermostat
In case of overheating or lack of oil, your deep fryer will automatically stop. Unplug it
and let it cool. Then check the oil level:
1) Oil level is too low: add some oil and reload the knob (n°2 on picture).
2) Oil is too old: change it and reload the knob (n°2 on picture).
3) Other cases: call your after sale service.
Stopping the appliance
-Set the thermostat control knob to zero.
-Unplug the appliance.
-Let the device cool.
-To reuse the oil, open the draining tap and pour the oil through a filter to eliminate the
cooking residues
-Clean the appliance (See 6.Cleaning)
d) Breakdown / repair:
In case of breakdown or of damaged part, please call your after-sales service and confide any
technical operation to qualified person.
When you contact the after-sales service of your distributor or your store, give him the com-
plete reference of your device (commercial name, type and serial number). This information
appears on the visible descriptive plate behind the device.
VI CLEANING AND MAINTENANCE
-Let cool completely the device and the oil before any technical intervention or cleaning.
-Unplug the machine and remove the control unit before cleaning.
-For cleaning, only use non-abrasive products, clean regularly the external walls of your
device with warm water and wash liquid: avoid the abrasive towelling. Rinse your device
with a wet sponge.
-Caution : do not damage the heating element wires during cleaning
-Never clean the device under a water jet, the infiltrations would risk to damage it in a irrep-
arable way.
-Never immerse the control unit, the cord or the plug in the water or quite other liquid to
avoid any electric shock.
16

VII TECHNICAL SPECIFICATIONS
The machine is delivered with a cord fitted with 5 wires
Wires colours correspondence Phase 1 Brown
Phase 2 Black
Phase 3 Grey
Neutral Blue
Earth Yellow-Green
VIII NORMS AND LEGALS DISPOSALS
The device is conform to :
IEC/EN 60335-1
IEC/EN 60335-2-37
EN 55014-1 + 55014-2
EN 61000-3-2 + 61000-3-3
IX ELIMINATION OF THE ELECTRIC AND ELECTRONIC WASTE
The device respects the directives:
2002/96/CE (DEEE) N°34270064800021
2002/95CE (ROHS)
2006/95 CE
2004/108 CE
REACH RULE
Never put the device among household waste.
The device must be put down in a centre of recycling for the electric equipment.
Model RFE 12
Power 9 kW
Outside dimensions 400 x 610 x 445 mm
Volume 12 L
No element 3
Volatge 380-415 V 3 N ~
Ampere 13 A/ Phase
Weight 19 Kg
Maximum charges
(Kg)
2.5 kg
17

The materials of the device are indeed reusable. By eliminating correctly the electric and elec-
tronic wastes, the recycling and quite other shape of re-use of worn equipments, you participate
in a significant way in the environmental protection.
For any information about the collection of electric and electronic waste, please contact your
distributor.
10. GUARANTEE
Conditions of guarantee
The guarantee applicable to any device is the commercial guarantee of the distributor or the
retailer. Please contact the store where you bought your device to know the precise conditions.
The guarantee grants no right for damages.
The dispositions which follow are not exclusive of the profit of the legal guarantee planned by
articles 1641 and following ones of the Civil code relative to the defects and the latent defects.
Exclusion clauses of the guarantee
Bad installation and bad maintenance, in particular if they do not respect current regula-
tions or instructions appearing in this user guide.
Cannot benefit from the guarantee the repairs required as a result of false operations, of inap-
propriate use, of carelessness or of excess loads of the device, as well as those resulting from
variations of the power supply, over tension or from defective installations.
The damage due to shocks, bad weather is not flatware by the guarantee. The material travels
at the risks of the user; in case of delivery by carrier, the consignee has to have reservations
towards the carrier before any delivery of the device.
The guarantee comes to an end in case of intervention, of repair, of modification by no quali-
fied persons, or of use in inappropriate purposes.
18

PHASE
TERRE / EARTH
L 1
COMMUTATEUR /
COMMUTATOR
Câblage : C02392
Schéma électrique
S.Grenon 28/04/2014
NEUTRE /
NEUTRAL MICROSWITCH
1
THERMOSTAT / THERMOSTAT
P
INTERRUPTEUR /
TOGGLE SWITCH
PHASE
PHASE
L 3
L 2
A1
1 3
T1
T3
T2
A 2
14
VERT/ GREEN
ORANGE /ORANGE
THERMOSTAT DE SECURITE /
SAFETY THERMOSTAT
R1
R2
R3
Date :
28/04/2014
Indice
A
Dessiné par :
C.Gu
Approuvé par :
FRITEUSE RFE 12
DT08
Date :
19

20
Nomenclature RFE 12
Spare parts RFE 12
Nomenclature
J.Godéré28/04/2014
CODE QTE PIECE SPARE PART
07180 1 SUPPORT RELAIS SWITCH HOLDER
07186 1 ARRIERE RFE 12 REAR RFE 12
07187 1 COTE DROIT RFE 12 RIGHT SIDE RFE 12
07188 1 COTE GAUCHE RFE 12 LEFT SIDE RFE 12
07189 1 BANDEAU AVANT RFE 12 FRONT PANEL RFE 12
07192SE 1 CUVE FRITEUSE RFE 12 ASSEMBLEE TANK ASSEMBLY RFE 12
07193 1 COUVERCLE FRITEUSE RFE 12 LID RFE 12
07195SE 1 FOND DE SOCLE RFE 12 BOTTOM CASING RFE 12
07196 1 JAUGE FRITEUSE RFE 12 DIPSTICK RFE 12
51040SE 1 BOITIER FRITEUSE MF 160/RFE 12 CONTROL PACK CASING MF 160/RFE 12
51043 1 ARRIERE BOITIER MF 160/RFE 12 BACK CONTROL PACK CASING MF 160/RFE 12
51044 1 SUPPORT MICROSWITCH MICROSWITCH HOLDER
51046 2 BRIDE RESISTANCE MF 160/RFE 12/RFE 16 C HEATING ELEMENT HOLDER MF 160/RFE 12/RFE 16 C
51046SE 2 BRIDE RESISTANCE SERTIE RFE 12 HEATING ELEMENT HOLDER ASSEMBLY RFE 12
A01022 1 COMMUTATEUR COMMUTATOR
A01023 1 CLIP D'ASSEMBLAGE CLIP
A05008 1 CONTACTEUR RF14/RBE25/FC110 20A THREE-POLE SWITCH 20A
A05011 1 MODULE DE PROTECTION RFE 12 MODULE PROTECTION RFE 12
A06012 1 THERMOSTAT SECURITE SAFETY THERMOSTAT RF 12 SP
A06056 1 THERMOSTAT REGULATION FRITEUSE PROBE THERMOSTAT FRYER
A07017 1 MICROSWITCH 16 A/250V, T125 MICROSWITCH 16 A/250V, T125
A08003 1 VOYANT ORANGE DIAM 12 ORANGE PILOT LIGHT DIAM 12
A08009 1 VOYANT VERT DIAM 12 GREEN PILOT LIGHT DIAM 12
A10032 1 PRESSE ETOUPE CORD CLOSER
A13006 4 VERIN MOLETE NOIR (PIED) FOOT
A14113 1 BOUTON ELEC PLAT 9 H ELECTRIC KNOB 9 H
A15016 1 POIGNEE HANDLE
B04110 1 TUBE VIDANGE LG 114 mm RFE 12 DRAINING PIPE LG 114 mm RFE 12
B06009 2 TETON + ECROU RST-RBE8/12 STUD + NUT RST RBE 8/12
B08007 2 ENTRETOISE RB-CS-RTS SPACER
B10014 1 ROBINET VIDANGE FRITEUSE DRAINING DEVICE TAP FRYER
B10019 1 CONTRE ECROU 1/2 RFE 12/RFE 16 C/RFE 20 C LOCK NUT 1/2 RFE 12/RFE 16/RFE 20 C
B10020 1 MANCHON DD 1/2 RFE 12 UNION DD 1/2 RFE 12
C01018 1 CABLE H07 RNF 5x1,5 CORD H07 RNF 5x1,5
C05018 1 BORNE EQUIPOTENTIEL EQUIPOTENTIAL TERMINAL
D02179 3 RESISTANCE 3000 W RFE 12 HEATING ELEMENT 3000 W RFE 12
F04045 1 PANIER FRITEUSE RFE 12 BASKET FRYER RFE 12
G06P01060 1 CADRAN FRONT PANEL
I06003 6 ECROU NUT
Date :
28/04/2014
Indice
A
Dessiné par :
C.Gu
Approuvé par :
FRITEUSE RFE 12
DT08
Date :

21
Vue éclatée
S.Grenon 28/04/2014
07186
07189
07193
07196
51043
51046SE
51046
51046
A05008
A07017
A10032
A13006 (x4)
B04110
B06009
B06009
B10014
C05018
D02179
D02179 (x3)
F04045
A06012
A05011
A15016
C01018
I06003 (x6)
B10020
A14113
A06056
51040SE
07192SE
51046SE
07187
A08003
A08009
07195SE
B08007 (x2)
A01023
B10019
07188
A01022
G06P01060
Date :
28/04/2014
Indice
A
Dessiné par :
C.Gu
Approuvé par :
FRITEUSE RFE 12
DT08
Date :