DIG BOHE-BT User manual
INSTRUCTION MANUAL
BOHE-BT/BOHE-BTI Bluetooth
Hose End Timer (Tap Timer)
FCC certied - Bluetooth certied
Completely Waterproof - 3 Years Limited Warranty
Thank you for purchasing DIG’s BOHE-BT or BOHE-BTI Bluetooth Hose End Timer
(Tap Timer). This manual describes how to get the timer up and running quickly. After
reading this manual and becoming familiar with the basic functionality of the timer,
use the manual as a reference for less common tasks in the future.
About the BOHE-BT
The BOHE-BT/BOHE-BTI Bluetooth Hose End Timer (Tap Timer) employs the latest
in Bluetooth technology using the free DIG BTT app for Android or iPhone. The app
can be used to control and program any number of timers for complete control of
an outdoor faucet irrigation system. The timer is powered by 2 AA batteries that can
last up to 1 year (using name brand alkaline batteries) and is enclosed in a compact,
waterproof housing to protect it from the elements.
Specification
• Operating pressure: 10 to 120 PSI (.7 to 8.3 bar)
• Temperature range: 38º-130º F (-2º to 54º C)
• Flow range: .1 to 6 GPM (.38 to 30 L/H)
• Power source: 2 AA alkaline batteries (not included)
• USA Connection: Female hose thread inlet (FHT) x male hose thread outlet (MHT)
• International Connection: British standard thread for tap (BSP)
• Dimensions: 5.5″ x 3.1″ x 4.3″ (14 cm x 7.9 cm x 11 cm)
• Weight: 8 oz. (227 g)
Component Identification
Timer inlet 3/4″female
hose thread or BSP
Battery
compartment cap
for 2 AA batteries 1 button for
manual run
and reset
Timer outlet 3/4″
male hose thread
or BSP
Setup
DIG’s BOHE-BT & BOHE-BTI Hose End Timers are the easiest Bluetooth® hose
end timers to set up and install.
• First, download the DIG BTT app using the iOS App Store, Google Play,
utilizing the QR code on the box, or from the DIG website.
• Once the app is installed, open the battery compartment cap on the timer by
turning it counter-clockwise.
• Install two, fresh, brand name, AA alkaline batteries (not included). The
proper negative and positive orientation is located on the underside of the
timer.
• Screw the battery cap back on clockwise until hand tight.
• Attach the timer inlet to the outdoor faucet/spigot or tab and turn clockwise
until hand tight.
• Attach a drip irrigation system or garden hose to the timer outlet and turn
clockwise until hand tight.
• Open the DIG BTT app from your smartphone or tablet and use the
instructions in the App Screens Overview to program and operate the timer.
App Controller/Timer Screen Overview
Controller Scanning Screen
• The DIG BTT app automatically scans for nearby timers when opened. Any DIG
Bluetooth timers within 50 feet (15 meters) line of sight will appear on screen.
Your new timer will appear as the BT Hose End Timer.
• Its picture, status (watering -on- or not watering -off-), connection strength, and
battery life, will appear alongside it.
• Tap on the timer to connect to it and start programming.
Also available from this screen are the Connection History and Contact Us buttons
by tapping the button in the top right. The Connection History allows you to see
every controller ever connected to from this phone or tablet. It stores the data it last
saw from each controller, but no editing can be done. Deleting an
entry will remove all the saved data for that controller (so, any
passwords set will need to be reentered and any pictures will
have to be retaken). To delete an entry, tap it and then select the
garbage can in the top right corner. The Contact Us button can be
used to nd information about DIG.
Controller
name
Last run
information
Battery life
Connection
strength
Schedule
Overview:
Shows current
program
run times.
Red lines
indicate that
there is an
overlapping
start time
Activate or
deactivate
the program
Schedule
type
Schedule
settings
Up to 5
start times.
Select an
existing
start time to
edit/delete.
Red start
times are
overlapping
and will not
run
Run time
for valve
Home
(current page)
Controller
settings
Manual run
Home Screen
Once connected, the Home Screen will appear. This screen has everything needed to
program the controller.
By default, the controller’s program is off. To turn it on, push the switch under the
“Program” area. It will turn green and the Program area will light up indicating that it
can now be modied. The button is shown next to “Activate or deactivate the pro-
gram” in the screenshot below.
The controller is ready to be programmed. Simply select the schedule (weekly, even/
odd, or cyclical), set your start date or days, add times, and set a duration. The con-
troller is updated immediately each time a button is pressed, so there is no need to
save or upload to the controller. Whatever is shown on screen is already saved to the
controller.
Turn the
entire
system
on/off.
Controller
will not
water
Set a rain
delay
Set up to
9 dates
where the
controller
will prevent
watering
Budgeting
per month
View
monthly
watering
history for
the past 12
months Set name
of the
controller
Set picture
for the
controller
Set password for controller.
Password will only be seen when entering controller from a new
phone. Reset controller to reset password if forgotten
Picture of
controller
whether
controller is
currently
runnning
or not
Controller Setting
The Controller Settings screen contains everything else needed to fully control your
irrigation system. It can be reached by selecting the Controller Settings button on
the bottom of the screen. Turn on or off the entire system through the System Active
switch, add a rain delay to shut off the controller for a limited time, budget each
month to modify the watering duration based on the season, set specic dates in
which the controller should not run, and view 12-month history of the controller.
Use the nal settings to rename the controller to something memorable and give
it a picture so it’s easy to nd from the scanning screen next time. Set a password
to prevent strangers from connecting to your timer. The password is saved to the
phone so it will (almost) never have to be entered again (unless it’s changed or when
connecting to the timer with a new phone).
Start/Stop
Manual Run
Set Manual
Run
duration
Manual Run
The Manual Run screen allows for Manual Operation of the controller. It can be
reached by selecting the Manual Run button on the bottom right of the screen.
To manually run the controller, tap the button on the right of the screen. This but-
ton can also be used to stop any existing run. The default manual run time is for 5
minutes, this can be changed by tapping on the time and changing it.
The controller can also be manually run from the timer itself by pushing the button.
The duration of this manual run is equal to the duration of the scheduled program.
The button can also be used to end any watering.
Installation
• Attach the timer inlet to the outdoor faucet/spigot or tap by attaching the female
swivel thread into the faucet and turning clockwise until hand tight.
• Attach a drip irrigation system or garden hose to the timer outlet and turn
clockwise until hand tight
• Manually run the system using the App’s manual run or by pressing the button on
the DIG BOHE-BT/BOHE-BTI to ensure that it is working properly
Reset to Factory Defaults
• Press and hold the button on the DIG BOHE-BT/BOHE-BTI for 15 seconds. This
will remove all controller programs, settings, historical information, and any set
passwords.
This is the only way to reset a password, so try not to forget it!
Technical Assistance
• Should you encounter any problem(s) with this product or if you do not
understand its many features, please refer to this operating manual rst
If further assistance is required, DIG offers the following customer support:
• DIGPRO Technical Service USA:
DIG’s Technical Service Team is available to answer questions in English and
Spanish from 8:00 AM to 5:00 PM (PST) Monday-Friday (except holidays)
at 1.800.344.2281 or 1.760.727.0914
• Questions also can be e-mailed to questions@digcorp.com
or faxed to 760.727.0282
• Specication documents and manuals are available for download at
www.digcorp.com
• Customer Assistance Outside the USA: Contact your local distributor
WARRANTY
DIG CORPORATION warrants these products to be free from defects in material and workmanship for a period of three years
from date of purchase. This warranty does not cover damage resulting from accident, indoor uses, misuse, neglect, modication,
improper installation or subjection to line pressure more than 125 lbs. per square inch for anti-siphon valves, in-line valves and
from an actuator. This warranty shall extend only to the original purchaser of the product for use by the purchaser. The obligation
of DIG CORPORATION under this warranty is limited to repairing or replacing at its factory this product which shall be returned
to the factory within three years after the original purchase and which on examination is found to contain defects in material
and workmanship. DIG CORPORATION SHALL IN NO EVENT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
OF ANY KIND; THE SOLE OBLIGATION OF DIG BEING LIMITED TO REPAIR OR REPLACEMENT OF DEFECTIVE PRODUCTS. SOME
STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. Unattended use for prolonged periods without inspection to verify proper
operation is beyond the intended use of this product, and any damage resulting from such use shall not be the responsibility of
DIG CORPORATION. There are no warranties, which extend beyond the description on the face hereof. In the case of purchase of
the product for use other than, for irrigation purposes, DIG CORPORATION hereby disclaims any implied warranties including any
warranties of merchantability and tness for a particular purpose. In the case of the purchase of the product for personal, family
www.digcorp.com
dig@digcorp.com
26-300 REV A 031518
Printed in the USA
DIG is a Registered Trademark of DIG Corp.
or household purposes, DIG CORPORATION disclaims any such warranties to the extent permitted by law. To the extent that any
such disclaimer or implied warranties shall be ineffectual, then any implied warranties shall be limited in duration to a period of
three years from the date of the original purchase for use by the purchaser. Some states do not allow limitation on how long an
implied warranty lasts, so the above limitation may not apply to you. In order to obtain performance under this warranty, the unit
must be returned to the factory, along with proof of purchase indicating original date of purchase, shipping prepaid, addressed as
follows: DIG CORPORATION, 1210 Activity Drive, Vista, CA 92081. Repaired or replaced units will be shipped prepaid to the name and
address supplied with the unit returned under warranty.Allow four weeks for repairs and shipping time. Repair of damaged units not
otherwise within warranty may be refused or done at a reasonable cost or charge at the option of DIG CORPORATION. This warranty
gives you specic legal rights, and you may also have other rights, which vary from state to state.
This device complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. The device should be
installed and operated with a minimum distance of 20cm between the radiator and your body. This device must not be collocated or
operating in conjunction with any other antenna or transmitter.
I. Changes or modications not expressly approved by DIG Corporation could void the user’s authority to operate the equipment.
II. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
III. Industry Canada
This device complies with Industry Canadalicence-exemptRSSstandard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme auxCNRd’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation
est autorisée aux deux conditions suivantes: (1) l’appareil ne doit pas produire de brouillage, et (2) l’appareil doit accepter tout
brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
This manual suits for next models
1
Table of contents
Other DIG Timer manuals
