NETWORKING
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. All other brands, products and trademarks are property of their respective owners.
Hardware
l8 ports RJ-45 10/1000 Gbps over copper
lAutomatic MDI/MDI-X mode on each port
l10/100/1000 Mbps in Autosensing
l1 serial console port DB9 DTE for local
management
lFull/Half-duplex support for ports
operating at 10/100 Mbps
lFull-duplex support for 1000 Mbps
lStore & Forward technology
lBack pressure flow control complying
IEEE 802.3x
lPacket filtering and forwarding 1.48
Gpps at 1000 Mbit/s
l16000 address memory
l1,5Mbyte buffer memory
LED indicators
lPower
l1000 Mbit/s
l100 Mbit/s
l10 Mbit/s
Mechanical Features
lMetal chassis
lDesktop version
l19” rack mounting kit included
lBuilt-in Power Supply 100-240 Vac
lConsumption: 50 Watt
Size and Weight
l440 x 200 x 45 mm
l3 Kg
Working Features
lOperating temperature: from 0 to 40°C
lHumidity: between 10% and 90% non-
condensing
Conformity
lCE Mark
Giga Switch 8 5.03.2003
The Networking solutions for fast and performing LANs.
DESCRIPTION
Use the existing cabling to increase the
performances of your LAN up to 1 Gigabps over
copper.
Giga Switch 8 is a root switch to carry out backbones
at the maximum speed available on the UTP cabling
(Category 5E or higher).
Giga Switch 8 is the ideal solution to create
departmental areas requiring special performances,
as groups of CAD/CAM stations, Desktop Publishing
graphics, 3D modelling or high capacity servers,
where the data transfer and exchange speed is very
important.
Giga Switch 8 can manage 1.48 Gpps (pps=packet
per second) for the maximum performances of your
LAN.
Any of the 8 ports is able to automatically adjust to the
cable/ethernet device (straight or cross) without
placing cross cables, in this way you can connect any
devices: Ethernet card or Router.
The Up-link port to other hubs or switches is not more
present; you can simply use the port you prefer.
The Led indicators on the front panel inform you on
the speed and status of each port.
Giga Switch 8
Code: 8E4126
