Digimate L-1721 User manual

1
Contents
English .……………………………………………………………………………2
繁體中文 .………………………………………………………………………..12
简體中文 .………………………………………………………………………..22
Français .…………………………………………………………………………32
Deutsh .…………………………………………………………………………..42
Italiano .…………………………………………………………………………..52
Español …………………………………………………………………………..62
Dutch ….…………………………………………………………………….……72
Português .………………………………………………………………….……82
Warning :
Read this instruction carefully.
1. Keep this equipment from humidity. The equipment shall not be exposed to dripping or splashing.
2. The equipment is for indoor use in dry locations.
3. The socket-outlet shall be installed near the equipment and shall be easily accessible.
4. Operate the equipment only on maximum ambient temperature 40 degreeC, without any cover.

2
GettingStart
Table of content...........................................................................................................2
View of Monitor............................................................................................................3
Unpacking ...................................................................................................................4
Warning.......................................................................................................................4
Hardware Installation...................................................................................................5
Menu control button ....................................................................................................6
Key introduction ..........................................................................................................6
Cleaning Notices.........................................................................................................7
Precaution...................................................................................................................7
Troubleshooting...........................................................................................................7
OSD (On-Screen Display) Menu Mode....................................................................8-9
Display Mode ............................................................................................................10
Specification.............................................................................................................. 11
All Information in this manual may change from time to time without prior notice.

3
View of Monitor

4
Unpacking
Our 17” LCD monitor shall be content with these following items. Make sure you get all these set ready, otherwise
contact to your dealer or store which you purchased it. At last, feel free to contact us.
17” TFT LCD Monitor
External Univ15 pin D-sub
(RGB Analog) input signal cable
Power Cord
External Universal AC Adaptor
(100-240V, 50/60Hz)
Audio connector
User’s manual
Warning
1. Make sure that the system power is turned off.
2. Plug the signal cable to the signal connector at the rear of PC.
3. Plug adapter output cable to the jack at the rear of LCD monitor and the power cord to the adapter.
4. Connect the power cord to power source.
5. Turn on the computer and the monitor.
6. For the best quality of the performance, we suggest you to set resolution as “Display Mode”.

5
Hardware Installation
Be carefully to your LCD monitor, it’s very exquisite but easy to broken. Turn off LCD’s and PC’s power before you
set it up. Follow our installation step by step.
Input
【1】PC In : This can be connected with the D-Sub 15 pin signal Cable.
【2】DVI Port : This can be connected with the DVI signal Cable. * DVI function is optional.
【3】LINE in：This can be connected to the audio-out connector of any sound resource.
【4】DC port：This is for connecting the power cable.
Wall mount instruction
【1】 PUSH
【2】 Hinge Cover
【3】 Pivot Screw
【4】 Turn & Pull Base
【5】Base
1 2 3 4

6
Monitor Adjusting
Menu control button
Key introduction
Power: Turn the LCD power on and off. When the power is on, the light is showing green,
stand by will be orange.
OSD Menu: Press the button to OSD menu, menu right adjustment.
Auto Tune: Auto adjust, menu left adjustment.
Decrease < - >: Hot-key of volume adjust ment. Decrease the option value in the OSD menu.
Increase < + >: Switch from DVI operating environment to VGA. Increase the option value in the OSD menu.

7
Cleaning Notice
1. Be gentle to clean the screen.
2. Never, ever, using any kind of corrosiveness chemical dissolvent to clean the screen, it may hurt your
screen surface.
3. We suggest that using a clean camel hair brush or a soft, clean, lint-free cloth to wipe the screen.
4. Don’t give any pressure directly to the LCD
Precaution
1. Do not expose the monitor to direct sunlight or heat.
2. Do not spill liquid on the monitor.
3. Do not attempt to open the monitor. You may be hurt by electric shock. For service, call your place of
purchase.
4. Do not use your monitor when magnets or electronic products are operating nearby.
5. Do not use harsh chemicals or strong cleaning solvents to clean the monitor screen. Wipe it with clean,
soft clothes applied with mild solution.
6. Do not place anything on your monitor. Bad ventilation may elevate temperature in the monitor.
7. Don’t use your fingers to touch the LCD Screen, directly. Fingerprint that contains oil and may by
difficult to clear.
Troubleshooting
Make sure that your monitor is properly installed if you have encountered any trouble using this product.
˙There is no picture on the screen.
Check:
1. Power saving mode. Press any key and move the mouse to deactivate the mode.
2. Signal cable connector pins. If there are bent or missing pins, consult your place of purchase.
˙Characters look too dark or too light
Check:
1. Using OSD Menu to adjust the Brightness.
˙When your monitor shall be Adjusted?
Check:
1. If the resolution of frequency is being changed.
. The Text appears on the screen are unclear.
Check
1. Make sure the resolution or refresh rate match with the Display Mode.

8
OSD (On-Screen Display) Menu Mode
Option select
1. Press the OSD button to access menu.
2. Using Auto Tune for left adjustment.
3. Press OSD again for right adjustment.
Brightness:
Adjust the
brightness of the
display.
Main menu brightness adjust
Contrast：
Adjust the
difference between
light and dark area.
Main menu contrast adjust
Phase：
Adjust the phase
of pixel clock.
Main menu phase adjust
Clock：
Adjust the
frequency of the
pixel.
Main menu clock adjust
Horizontal
Position：
Adjust the
horizontal
position of the
display. Main menu H position adjust
Vertical Position：
Adjust the vertical
position of
display.
Main menu V position adjust
Reset :
Recall the default
setting.
Main menu Reset
Color Temp :
Adjust the color
Temperature.
Main menu color temp. adjust
Language :
Language
support.
Main menu language adjust
Miscellaneous :

9
EXIT :
Saving and
Leave.
Main menu EXIT adjust
Miscellaneous
Return :
Return to main
menu.
Return
Horizontal
Position：
Adjust the
horizontal
position of the
OSD. OSD H position adjust
Vertical
Position：
Adjust the
vertical position
of the OSD.
OSD V position adjust
OSD Duration：
Adjust the timing
of the OSD menu.
OSD duration adjust
Auto color：
Adjust the color
automatically.
Auto color adjust
Volume :
Adjust of
speaker.
Menu Volume adjust