Diginet DGOZ-TCSW-LR35 User manual

Installation
Guide
DGOZ
-
TCSW
-
LR35
WWW.DIGINET.NET.AU
LCD Touc Switc
Wall mounted control interface for the RAPIX™ Lighting Control System
Designed in Australia to meet
Australian Standards and
installation conditions

LCD Touch Switch
Page
2
Introduction
Important notes
This product must only be used in conjunction with a Diginet RAPIX™ Lig ting Control
System and connected as highlighted in this guide.
There are no user serviceable parts inside this device. Do not attempt to disassemble or operate the device
with any covers removed.
If you require information or assistance regarding the installation or operation of this product, contact
Technical Services at Diginet Control Systems. Contact details are provided on the back cover of this guide
and also at www.diginet.net.au
Product summary
The LCD Touch Switch provides a wall mounted control interface for the RAPIX™ Lighting Control System.
The switch is fully configurable via RAPIX™ Integrator software, with a maximum of 20 touch-based
buttons (over 4 pages). Each button can be assigned real names and a range of graphical interface options
are selectable from a collection of themes.
A wide range of button functions are supported through RAPIX™ Integrator software. For example, push
and hold to fade up or down, scene control, timers and many other options.
To enable quick and easy installation, the switch connects directly to a RAPIX™ eHub smart input, with no
need for a separate power supply connection. It is designed to be mounted using standard Australian wall
switch mounting brackets and wall boxes.
Product Features
•3.5” colour LCD with resistive touch overlay
•Up to 20 software configurable control buttons
•Mounted using standard Australian brackets and wall boxes
•Sealed fascia for cleaning agent resistance
•Supports date and time display
•Optional beep when touched
•Customisable button names with Unicode support
•Ability to show progress of fading operations (up, down) and timer operations
•Optional fall-back page which can be configured to show a blank page, time, date and time or a
definable logo
•Supports 6 common languages (English, French, German, Italian, Spanish and Simplified Chinese)
•Screen brightness can be configured via RAPIX™ Integrator software
•Automatic brightness control based on timeout after a touch
•Support for firmware updates

LCD Touch Switch
Page
3
Installation
and wiring
Installation
The LCD Touch Switch is designed to be mounted using standard electrical mounting accessories. For
example, a Clipsal® 154 mounting bracket or 157 wall box, as shown below.
Mounting Bracket One Gang Wall Box
Examples of
typical
standard electrical mounting accessories
suitable for mounting the LCD Touch Switch
The LCD Touch Switch can be installed as follows
• Install the LCD Touch Switch Back Plate on the wall using an appropriate mounting accessory
• Connect the RJ-45 on the supplied adaptor cable into the rear of the front LCD Touch Switch
module (see wiring section below)
• The front LCD Touch Switch assembly can then be clipped into the Back Plate

LCD Touch Switch
Page
4
Interconnections
This product must only be used in conjunction with a Diginet RAPIX™ Lig ting Control
System and connected as highlighted in this guide.
The LCD Touch Switch is connected to any of the four smart device ports on a RAPIX™ eHub. Up to 100m of
standard Cat 5 / Cat5e cable can be used, with the appropriate patch lead / adaptor lead at each end (see
next page for details).

LCD Touch Switch
Page
5
Wiring
The LCD Touch Switch is wired to a RAPIX™ eHub via standard Cat5/5e cable (up to 100m), with a plug in
patch lead at each end. There are no additional screw-down terminations required.
The eHub powers the LCD Touch Switch via the above Cat 5/5e connection. The LCD Touch Switch does not
require a separate power supply.
Configuring and Commissioning
The LCD Touch Switch is configured using RAPIX™ Integrator Software. Contact Diginet for further details.
Specifications and
standards
compliance
Product specifications
Screen Size 3.5”
Screen Resolution 480 x 320 pixels
Colour depth
65K
Pixel Pitch
0.153 H)mm x 0.153 V)mm
Brightness 220cd/m
2
configurable in software)
Contrast Ratio 500:1
Touch Overlay Type
Resistive
Connection Connects to eHub using RJ11/RJ12 patch lead or RJ45 patch lead
Display Viewing Area 49mm x 73mm
Weight
80g
Number of control buttons Configurable for 1 – 20 buttons
Single page: up to 6 buttons
Multiple Pages: up to 5 buttons per page
Operating Temp. Range 0 – 50
⁰
C
Operating Humidity Range
10%
-
95% RH non condensing
Compliance Marks ROHS, WEEE, CE, RCM
A patch lead with
a
RED
fe
male RJ
-
45 socket must be
used at the LCD Touch Switch
A patch lead with a BLUE female RJ-45 socket must be
used at the eHub

LCD Touch Switch
Page
6
Dimensions
Standards and compliance
The LCD Touch Switch is designed to meet/exceed the following Australian and International standards.
Australian/New Zealand EMC and Electrical Safety Frameworks and Standards
Regulation
Standard
Title
EMC
AS/NZS CISPR 22:2009
CISPR15
Information Technology Equipment
–
Radio
Disturbance Characteristics – Limits and Methods
of Measurement
AS/NZS CISPR 22
-
A:2010
Electrical Safety
AS/NZS 60950
-
1
:
2011
Information Technology
Equipment
–
Safety
The product is in conformity with the essential requirements of the following EC Directives and accordingly
carries the CE marking.
EC Council Directive
Title
2006/95/EC Low Voltage
2004/108/EC Electromagnetic Compatibility (EMC)
2011/65/EU
Restriction of Hazardous Substances (RoHS) in Electrical and Electronic
Equipment

LCD Touch Switch
Page
7
Product warranty
This LCD Touch Switch, item number DGOZ-TCSW-LR35, has a two-year warranty against manufacturing defects in
accordance with the following terms:
1. Nothing in this Warranty affects any person's rights under the Australian Consumer Law. The benefits to any person
under the Gerard Lighting Warranty are in addition to the rights and remedies available under any Consumer
Guarantees.
2. Subject to the other clauses of this Warranty, Gerard Lighting warrants that the Goods will be free of manufacturing
defects and will perform to Gerard Lighting's specifications.
3. The benefit of the Gerard Lighting Warranty extends only to the owner of the property in which the Goods are installed
(the Owner) for two (2) years after the date of purchase (Warranty Period).
4. If within the Warranty Period the Goods fail to perform to Gerard Lighting's specifications as a result of some defect in
material or workmanship in the Goods (Defect) then Gerard Lighting will, at its option, repair the Goods or supply
replacement Goods free of charge.
5. The Gerard Lighting Warranty will not apply to Goods:
5.1. installed by any person other than a qualified tradesperson; or
5.2. subjected to misuse, neglect, negligence or accidental damage; or
5.3. operated in any way contrary to any operating or maintenance instructions; or
5.4. improperly handled, installed or maintained; or
5.5. altered or modified prior to or after installation.
6. The Gerard Lighting Warranty does not apply to faulty or defective design of Goods unless Gerard Lighting has designed
the Goods and Gerard Lighting expressly accepts responsibility for such design in writing.
7. In order to make a claim under the Gerard Lighting Warranty, the Owner must:
7.1. contact Gerard Lighting to obtain a Returned Goods Authorisation Number for the Goods and to be notified of
Gerard Lighting's return address for the Goods by:
7.1.1. freecall 1300 95 DALI (3254); or
7.1.2. post to PO Box 314, Padstow NSW 2211; or
7.1.3. fax to 1300 95 3257; or
7.1.4. email to [e-mail].
7.2. return the Goods at the Owners expense to the return address notified by Gerard Lighting together with all
accessories, instructions, specifications or other material supplied with the Goods and a notice in writing:
7.2.1. stating the Returned Goods Authorisation Number for the Goods;
7.2.2. describing in detail the defect or fault in the Goods;
7.2.3. setting out the Owner's contact details (including postal address, email address and telephone numbers at
which the Owner can be contacted during usual business hours).
7.3. Gerard Lighting will not accept any returned Goods which have not been returned strictly in accordance with the
above instructions.
8. Gerard Lighting will examine any returned Goods and if Gerard Lighting determines that they are defective through no
fault of the Owner and are otherwise undamaged, Gerard Lighting will repair or replace the Goods free of charge.
9. Gerard Lighting will notify the Owner whether it accepts the Goods are defective within a reasonable time of return.
10. Gerard Lighting will not be responsible for any costs of de-installation, re-installation, returning Goods or for redelivery
of the Goods (whether original or repaired and/or replacement Goods) by Gerard Lighting and any other related
expenses of the Owner in claiming under the Gerard Lighting Warranty.
11. Gerard Lighting will not be responsible for any loss or damage to the Goods occurring while the Goods are in transit
(either on return to Gerard Lighting or upon redelivery to the Owner of the original or repaired and/or replacement
Goods).
12. Gerard Lighting will not be responsible (whether arising in contract or tort (including negligence) or under any statute)
for any special, indirect, incidental, consequential or economic losses or damages (including loss of data, business,
profits, revenue, anticipated savings, bargain, opportunity or goodwill) whether or not the possibility of those losses or
damages being suffered had been brought to the attention of Gerard Lighting.
The Australian Consumer Law requires the inclusion of the following statement with the Gerard Lighting Warranty:
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a
replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage.
You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.

LCD Touch Switch
Page
8
Gerard Lighting Pty Ltd (Gerard Lighting) reserves the right to alter the specifications, designs or other features of
any items and to discontinue any items at any time without notice and without liability. While every effort is
made to ensure that all information in this user and installation guide is correct, no warranty of accuracy is given
and Gerard Lighting shall not be liable for any error
The identified trademarks and copyrights are the property of Gerard Lighting unless otherwise noted
Clipsal is a registered trademark of Schneider Electric Australia Pty Ltd
© Copyright
This user and installation guide is copyright to Gerard Lighting. Except as permitted under relevant law, no part of
this user and installation guide may be reproduced by any process without written permission of and
acknowledgement to Gerard Lighting
Diginet is a brand of Gerard Lighting
March 2017
Printed on recycled paper
WWW.DIGINET.NET.AU
Product of Gerard Lig ting Pty Ltd
ABN – 89 095 788 864
96-112 Gow Street
Padstow NSW 2211
Contact
General Enquiries: 1300 95 DALI (3254) or [email protected]
Technical Services: 1300 95 3244 or [e-mail]
Fax: [phone]
Diginet is a brand of Gerard Lighting
Issue 1 – March 2017 Item 14-16-006-001-01