Digitus DA-10196 User manual

UNIVERSAL CHARGING ADAPTER,
USB-C™, 20 W
Quick Installation Guide
DA-10196

2
INTRODUCTION
The Universal Charging Adapter from DIGITUS® is suitable for USB-C™
devices such as smartphones, tablets or notebooks and provides an
output of up to 20 W. The integrated short circuit, surge and excess
current protection provides added security. Furthermore, the
integrated excess heat protection prevents potential overloads and
damages to the charger or connected devices. The LED display
provides information about the current charging status. Its compact
dimensions make the charging adapter ideal for on the go.
PACKAGE CONTENT
Before attempting to use this unit, please check the packaging and
make sure the following items are contained in the shipping carton:
•1 x Universal Charging Adapter, USB-C™, 20 W
•1 x QIG
SECURITY ADVISE
Please read the following information before usage:
•Do not touch this product with wet hands or expose it to water.
•Prevent the USB A ports and USB-C™ Ports conductive materials,
such as liquids, dust, metal powders, and pencil leads.
•If not used for a long time, disconnect the charger from the socket
•This product is intended for private use only and must not be
used for commercial purposes to prevent material damage or
personal injuries.
•Do not use this product in any way other than for the intended
usage.
•For indoor use only. Do not expose to water or excessive
moisture.

3
•Do not use the product if the ambient temperature exceeds 25C.
Do not store outside the temperature range 0-40℃.
•Do not drop, damage or disassemble this product. Do not use this
product if it is damaged in any way.
•If the product becomes unusually hot, stop using it immediately
and contact customer support.
•There is a risk of electric shock if the product is used incorrectly.
•Not suitable for use by children or use by persons with reduced
physical, sensory or mental capabilities, or lack of experience or
knowledge, unless they have been given supervision or
instruction concerning use of the product by a person responsible
for their safety.
PRODUCT FEATURES
•Compact charger for USB-C™ devices such as smartphones or
tablets
•Supports charging power of up to 20 W - compatible with Power
Delivery (PD 3.0)
•Integrated surge protection / excess current protection / short
circuit protection
•Integrated overheating protection with auto-recovery for the
highest degree of security
•LED charging display
•Ideal for use on the go thanks to compact dimensions
•Housing made of fire-resistant material
•Compatible with many smartphones / tablets with 20 W charging
adapter

4
PRODUCT OVERVIEW
1. USB-C™ power delivery
2. LED charging indicator

5
TECHNICAL SPECIFICATIONS
•Connection: USB Type-C™
•Input voltage: 100 - 240 V AC, 50/60 Hz
•Plug designation: CEE-7/16 Euro plug (Type C)
•Standby power consum ption: 0.1 W
•Output voltage: 5 V / 3 A, 9 V / 2.22 A (20 W max.)
•Supports Power Delivery 3.0 with 20 W charging capacity
•Surge protection / excess current protection / overload protection
/ short circuit protection
•Protection against overheating with automatic switch-off and
recovery (auto-recovery)
•Operating temperature: 0 °C to 40 °C
•Storage temperature: -20 °C to +85 °C
•Operating humidity: 20% - 90% RH (non-condensing)
•Storage humidity: 5% - 95% RH (non-condensing)
•Dimensions: L 64.1 x W 44 x H 27.7 mm
•Color: White
•Weight: 59 g
OPERATION
Operation Procedures
3. Plug the travel charger into a socket.
4. Plug one USB connector of the cable into the Type-C interface of
travel charger and plug the other connector of the cable into the
electronic device (mobile phone, MP3, tablet, PC, etc.)
5. Please unplug the travel charger after the electronic device is fully
charged.

6
Operation Notes
1. For optimum performance, please use the travel charger
according to the user manual.
2. Please plug the travel charger into socket which voltage range
should be 100-240VAC.
3. Please unplug the travel charger after using.
Note: Our products have protection functions and the two tips
above are suggestions just for safety.
4. Do not use the travel charger with an electronic product which is
not in conformity with the specifications, as to avoid any problem
caused by specification mismatching.
5. It’s normal that travel charger will be a little overheated in the use
process.
6. When the travel charger stops working under over-current, over-
temperature or short-circuit protection, please unplug the device
after it automatically returns to work, then you need to check
whether the device is compatible with this charger.
7. Do not let the travel charger close to fire,
such as stove, candles, etc.
8. Do not let the travel charger soak into liquid,
such as swimming pool, bathtub, etc.
9. Do not wash the travel charger with corrosive cleaner.
10.If the travel charger cannot work properly, please contact the
store or distributor in your area.

7
RECYCLING
This symbol on the electronic product or on its packaging indicates
that the electronic product (including the battery) should not be
treated as household waste. Instead, it should be handed over to the
appropriate collection point for the recycling of electrical and
electronic equipment. Do not attempt to remove internal batteries.
Internal batteries shall be removed only by a waste treatment facility
or trained service professional.
By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences, for the environment and
human health, which could otherwise be caused by inappropriate
waste handling of this product. The recycling of materials will help
conserve natural resources. For more informat ion about recycling of
this product, please contact your local council for advice or your
household waste disposal service.
DISCLAIMER
Hereby Assmann Electronic GmbH, declares that the Declaration of
Conformity is part of the shipping content. If the Declaration of
Conformity is missing, you can request it by post under the below
mentioned manufacturer address.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany