Digitus DN-95132 User manual

GIGABIT ACTIVE
802.3at PoE MIDSPAN
Quick Installation Guide
DN-95132

2
Introduction
DN-95132 is an indoor rated active PoE midspan
Injector specially designed for complex backhaul
and networking applications. It provides 52Vdc,
0.58A power for remote PDs over 2 pairs output.
It supports both 10/100 Base-T and Gigabit
device. It works for 30W PoE PDs, such as wireless
APs, Wifi routers, Network cameras, IP Phones,
Microwave Radio and other power Ethernet
terminals. It fully complies to IEEE802.3af/at PoE
standard. Enclosed in an IP40 fire retardant plastic
case. Enclosed in an IP40 fire retardant plastic
case. It works with a wide input voltage of 100-
240 VAC, 50 or 60 Hz. It has detection chip inside,
which will detect and classify PD before powering
it. It will not provide power until a standard-
compliant PD is detected.

3
Main Features
•Provides 52Vdc, 0.58A power for remote PDs
over 2 pairs output
•Supports both 10/100 Base-T and
Gigabit device
•Works with a wide input voltage of
100-240 VAC, 50 or 60 Hz.
•Easily merge of power and data cables into
a single cable
•Each output port has output current limited,
short-circuit protection, complete Powered
Device (PD) detection and classification
•The Injector can be used independent of
operating system
Package Contents
•DN-95132 PoE Injector
•Power Cord x 1
•Quick Installation Guide x1

4
Technical Data
•IEEE802.3 10Base-T Ethernet
•IEEE802.3u 100Base-Tx Fast Ethernet
•IEEE802.3ab 1000Base-T Gigabit Ethernet
•Full compliant with IEEE802.3af/at
PoE standard
•Input :100-240Vac 1.0A 50/60Hz
•Output: 52Vdc 580mA
•Power Pins: 4/5(+), 7/8(-)
•Data Speed: 10/100/1000Mbps
•Operating Temperature: 0°C to 40°C
•Operating Humidity: 20% to 80%,
non-condensation
•Storage Temperature: -20°C to 70°C
•Operating Altitude: up to 2000 meters
•Case: Plastic
•Color: White
•IP Rated: IP40
•Size: 107.3mm X 56mm X 34mm
•Weight: 146.8g
•Power Indicator: Yellow
•PoE Load Indicator: Green

5
Product Description
1.
LAN: Data Input Port
4.
PoE Load Indicator
2.
Power Indicator
5.
AC Power Input
3.
PoE: Data & Power
Output Port

6
Product Working Diagram
1.
Wireless AP
a.
Data and power cable
2.
IPC
b.
100-240Vac power cable
3.
100-240Vac Power
c.
Data cable
4.
Switch
5.
DN-95132

7
Hereby Assmann Electronic GmbH, declares that
the Declaration of Conformity is part of the
shipping content. If the Declaration of Conformity
is missing, you can request it by post under the
below mentioned manufacturer address.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany