Digitus DA-71106 User manual

3.5" SSD/HDD Enclosure, SATA I-III - USB 3.0
Manual
DA-71106
Introduction
Congratulations on your purchase of this Portable USB3.0 Hard Drive Enclosure. It's a great way of
making a lightweight, portable mass storage device with an unused internal hard drive that will be
detected and installed automatically by your computer when connected. Depending on the
capacity of the drive used, you can keep large files, run programs and play videos directly from it,
thanks to its super-speed USB3.0 connection. It can also be used as a backup drive to your
computer or other devices.

Specification
Transfer interface USB3.0
Transfer rate 5Gbps (MAX)
Support HDD 2.5”/3.5” Hard disk
Work temperature -40~65 °C
Work humidity 8%~90%
Storage humidity 5%~95%
Operate system Windows 2000/XP/VISTA/WIN7/8/10,MAC OS X
Installation of Hard Drive
1. Open the enclosure
2. Place hard drive into the enclosure
3. Connect SATA cable to hard drive
4. Tighten screws on the enclosure to fix the hard drive in place
5. Screw the enclosure back together
6. Connect power cable to enclosure
7. Connect USB cable to USB port on device
8. When attached to PC or device, click 'My Computer' and hard drive will appear.
9. No additional drivers required.
Package Content
1 x 3.5” SSD/HDD Enclosure, SATA I-III - USB 3.0
1 x Main adaptor (12V/2A)
1 x Screwdriver
1 x Screw
1 x USB 3.0 cable
1 x User manual

System Requirements
Hardware:computer should have USB port
Software:Windows 2000/XP/VISTA/WIN7/8/10, MAC OS 10.6 above
(Note: Windows98 have to install CD Driver first)
Connect the USB cable to PC.
Click “My computer” and hard-disc will appear. An icon for online plug should appear on the lower
right corner of the status bar (new hard-disc should be divided into sections with FDISK first, then
its icon will appear and normal operation can start after formatting.)
Hereby ASSMANN Electronic GmbH, declares that this device is in compliance with the requirements of
Directive 2014/30/EU (EMC), Directive 2014/35/EU (LVD) and the Directive 2011/65/EU for RoHS compliance.
The complete declaration of conformity can be requested by post under the below mentioned manufacturer
address.
Warning:
This device is a class B product. This equipment may cause some radio interference in living environment. In
this case, the user can be requested to undertake appropriate measures to prevent interference.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany