Digitus DA-70473 User manual

VGA to HDMI Converter
Manual
DA-70473
The Digitus VGA to HDMI Converter converts your analog VGA signal to a digital
HDMI signal. The conversion enables you to easily connect devices having only a VGA
port to an HDMI monitor, a TV set or a projector. The converter is equipped with a
3.5 mm audio jack since the VGA input can play back only a video signal. Any existing
stereo signal is simultaneously converted and integrated into the HDMI signal. This
makes it possible to play back the audio signals via HMDI on your TV set.

Features
Use modern HDMI monitor/TV with older analog VGA device
Converts VGA video and audio signals to HDMI
Compliant with PC VGA resolution up to 1080P
SVGA (800x600@60Hz), 1024x768@60Hz, 720P (1280x720@60Hz), WXGA
(1280x768@60Hz), 1280x960@60Hz, SXGA (1280x1024@60Hz),
1400x900@60Hz, 1080P (1920x1080@60Hz)
No software or driver installation required
-Integrate triple 10-bit ADC.
-Supports 24-bit deep color
-Support 2 channel stereo audio
Input: VGA/3.5mm audio / USB power
-Color: Black
Package Content
VGA to HDMI converter
Audio cable (3.5 mm), 1.0 m
Micro USB cable, 1.0 m
Manual

Application Diagram
Note: USB power cable is need. (5V, 500mA)
Hereby Assmann Electronic GmbH, declares that the Declaration of Conformity is part of the
shipping content. If the Declaration of Conformity is missing, you can request it by post
under the below mentioned manufacturer address.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany
Audio
HDMI Cable
Micro USB (Power)