Digitus USB 2.0, 4+1 Port PCI Add-On card User manual

1
USB 2.0, 4+1 Port
PCI Add-On card
User Manual
(DS-33222)
All brand names and trademarks are properties of their
Respective owners.

2
Features and Benefits
VIAVT6212 chipset
PCI 32-bit 33MHz Interface
Compliant with USB specification revision 2.0
Backward compatible with USB 1.1 Specification
Hot-swapping feature allows you to connect/disconnect devices
without first turning system off
Supports high-speed (480Mbps), full-speed (12Mbps), and
low-speed(1.5Mbps) data transfer modes for simultaneous
operation of multiple USB 2.0/1.1 devices
Connects up to 127 USB Device Simultaneously on each port
Works with a various type of USB devices including hubs,
removable drives, digital cameras, scanner, CD-RWs,
DVD-ROMs, PC video cameras, printers, and more…
Four (4) external USB 2.0 ports
One (1) internal USB 2.0 port (Sharing with first external USB
port UJ1)

3
System Requirements
Windows® 7, Vista, XP
Available PCI slot
Hardware Description
Before installing the PCI VIA USB 2.0 Card, please see the photo
below highlighting the available USB ports of the card.
Note: The Internal Port (UJ5) shares with first External Port (UJ1).

4
Hardware Installation
1. Turn Off the power to your computer.
2. Unplug the power cord and remove your computer’s cover.
3. Remove the slot bracket from an available PCI slot.
4. To install the card, carefully align the card’s bus connector with
the selected PCI slot on the motherboard. Push the board down
firmly.
5. Replace the slot bracket’s holding screw to secure the card.
6. Replace the computer cover and reconnect the power cord.
Driver Installation
For Windows® XP/2000
Windows® XP/2000 will automatically detect and install the correct
driver for the PCI VIA USB 2.0 Card.
However, please ensure you have the latest Service Pack Installed.
For Windows® XP
Windows® XP Service Pack 1 or later
For Windows® 2000
Windows® 2000 Service Pack 4 or later

5
For Windows® Server 2003/Vista
Windows® Server 2003/Vista has built-in driver support for this
controller. Just install the board and Windows will automatically detect
and install the correct drivers for it. No additional driver is necessary.
To Verify Driver Installation
1. Right click My Computer, then click Manage. Click Device
Manager.
2. Double click Universal Serial Bus controllers option.
- USB Root Hub
(USB 2.0 Root Hub in Windows® 2000)
- USB Root Hub
- USB Root Hub
- VIARev 5 or later USB Universal Host Controller
(VIA USB Universal Host Controller in Windows® 2000)
- VIARev 5 or later USB Universal Host Controller
(VIA USB Universal Host Controller in Windows® 2000)
- VIAUSB Enhanced Host Controller

6