Digitus DA-73300-1 User manual

USB 3.0 SHARING SWITCH
User Manual
DA-73300-1
INTRODUCTION
DA-73300-1 USB 3.0 Sharing Switch allows maximum two PCs to share one
port device connected. It provides you a great solution to share USB
devices between two PCs to save the limited budgets on USB devices and
the effort on doing hot-plug process.
FEATURES
USB 3.0 Sharing Switch can support data transfer rate up to 5Gbps.
USB 1.1/2.0 backwards compatible.
USB 3.0 B-Type corresponded to computers and USB3.0 A-Type
connected to device.
No extra power is required
Selects PCs by using top panel Push buttons
Two LEDs indicate which PC is selected

SPECIFICATIONS
Function
Model No. DA-73300-1
PC Port USB3.0 B-Type x 2
USB Device Port USB3.0 A-Type x 1
Port Selection 2 x Push buttons
LED 2 x LEDs
Operating System Windows XP, Vista, 7, 8, 10, Mac OS 10.3 and
higher
Compatible USB Device USB 1.1/2.0/3.0
Power Mode USB Bus Power
Power Adapter No
Weight 40g
Dimension (L x W x H) 69x42x22 (mm)
Operation Temperature 0~40 °C
Storage Temperature -20~60 °C
Power Consumption 5
V
/50mA (Maximum)
PACKAGE CONTENTS
1 x USB 3.0 Sharing Switch
1 x Quick Installation Guide
2 x 1.5m USB 3.0 cable
HARDWARE INSTALLATION
1. Connect USB device to the USB port.
2. Using USB 3.0 cable to connect PCs and sharing switch.
Pr
i
nter

FAQ
Q1: Does the sharing switch support USB 1.1 and 2.0 devices?
A: The sharing switch can work and comply with USB 1.1 and 2.0.
Q2: Does the sharing switch need power supply?
A: No, the sharing switch is designed for non-powered switch.
It shares with computer power when you connect to the computer.
Q3: What operating system will the sharing switch work with?
A: The sharing switch can support Windows 7, 8, 10, Vista, XP, 2000 and
Mac OS x (10.3 and higher).
TROUBLESHOOTING
1. The switching function does not detect my computer.
make sure that the cable between the sharing switch and the
computer is completely connected
Try to connect the computer to a different USB port
2. The USB device is not working properly.
Please unplug and plug-in again to activate the device