Digitus DN-80119 User manual

8 Port Gigabit Switch, 10 inch,
Unmanaged, 2 Uplinks
Quick Installation Guide
DN-80119

2
This guide provides instructions to install
the Ethernet Switch.
Note: The model you have purchased may appear slightly different from the
illustrations shown in the document. Refer to the Product Instruction and
Technical Specification sections for detailed information about your switch, its
components, network connections, and technical specifications.
1. Product introduction
The 8-Port Gigabit Switch from DIGITUS® provides 8 x Gigabit RJ45 ports,
additionally it offers 2 SFP uplink ports with 1 Gigabit bandwidth. Easily expand
the existing network, providing a backplane bandwidth of 20 Gbps. The switch
can be installed in 10-inch server racks and enclosures. The power supply is
already integrated into the rugged, fanless chassis. Ideal for expanding /
building small home or business networks.

3
2. Technical Features
Number of ports 8 x 10/100/1000Mbps
Power consumption
5 W
Power cord
Type-F grounding plug (CEE 7/4) to
IEC C13 cold-device socket
Operating temperature 0°C to 40°C
Operating humidity 20% - 85% (non-condensing)
Storage temperature -10°C to 70°C
Dimensions
252 x 150 x 44 mm
Weight 0.95 kg
Uplink ports 2 x SFP 1000Mbps
Auto-negotiation Auto MDI/MDIX
Backplane bandwidth 20 Gbps
Forwarding capacity 14.88 Mpps
MAC addresses 4K
Operating voltage
100 - 240 V AC, 50/60 Hz, integrated power
supply, (IEC C13 IEC plug)
Fan design Fanless
Standards and
protocols
IEEE802.3 10Base-T Ethernet standard
IEEE802.3u 100Base-TX Fast Ethernet standard
IEEE802.3ab 1000Base-T Ethernet standard
IEEE802.3z Gigabit Ethernet (fiber)
IEEE802.3x Full duplex flow control and
Backpressure Half duplex flow control
IEEE802.3az Energy Efficient Ethernet (EEE)
LED Indicators Power, Link/Act
Casing Metal
Installation Rack mounting

4
3. Package content
•1x 8 Port Gigabit Switch, 10-Zoll, Unmanaged, 2 Uplinks
•1x Power supply cable
•1x QIG
4. Hardware Description
Thanks for purchasing the Ethernet Switch products.
This product is a type Gigabit Ethernet Switch. The machine comes with 8 Port
10/100/1000Base-TX with 2 Gigabit SFP Port Ethernet Switch can satisfy the
full speed forwarding of ports. The machine uses 10 "1U. The chassis can be
used on the desktop or on the rack excellent performance can help you widely
use in wireless, monitoring and other fields.
4.1 Front Panel
The front panel consists of LED indications and network ports.
4.2 LED Lamp
Power LED: The Power LED lights up when the switch is connected to
a power source.
Link/Act indicator: the light indicates the network connection through the
corresponding port. Flicker indicates that the switch is sending or receiving data

5
4.3 Rear Panel
The rear panel view of the Switch consists of an AC power connector.
Grounding: use specialized ground lead connect
Connect the power adapter output terminal to this port.
Supports input voltages 100-240VAC
5. Hardware installation
Open a seal
Open the shipping carton and carefully unpack its contents. Please consult the
packing list located in the QIG to make sure all items are present and undamaged.
If any item is missing or damaged, please contact the local reseller for replacement.
5.1 Switch installation
For safe switch installation and operation, it is recommended that you:
•Visually inspect the power cord to see that it is secured fully to the AC
power connector.
•Make sure that there is proper heat dissipation and adequate ventilation
around the switch.
•Do not place heavy objects on the switch.

6
5.2 Installation hole spacing
5.3 Plugging in the AC Power Cord
You can connect AC power supply cord to switch back and the other side
connect the power outlet. (Power outlet might as well grounding and support
over voltage protection)
Warning: Do not turn on the power switch before power cables are connected.
Power surge may cause damage to the Switch
5.4 Power failure
As a precaution, the switch should be unplugged in case of power failure.
When power is resumed, plug the switch back in.

7
6. Network connection
1 Game Player 5 IPTV
2 Wireless Access Point 6 Home Cinema
3
Laptop / PC
7
VoIP Phone
4
IP Camera
8
Broadband Router
This is a Class A product. In home environment, this product may
cause radio interference. In this case, the user may be required to
take appropriate measures.
Declaration
Hereby Assmann Electronic GmbH, declares that the Declaration of Conformity
is part of the shipping content. If the Declaration of Conformity is missing, you
can request it by post under the below mentioned manufacturer address.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany