Digitus DN-95311 User manual

8-PORT POWER OVER ETHERNET
WEB SMART SWITCH
Quick Installation Guide
(DN-95311)
FCC Warning
This device has been tested and found to
comply with limits for a Class A digital device,
pursuant to Part 15 of FCC Rules. These
limits are designed to provide reasonable
protection against harmful interference when
the equipment is operated in a commercial
environment. This equipment generates
and radiates radio frequency energy and, if
not installed and used in accordance with the
user’s manual, it may cause interference in
which case users will be required to correct
interference at their own expenses.
CE Warning
This is a Class A product. In a domestic
environment, this product may cause radio
interference in which case the user may be
required to take adequate measures.
Introduction
This switch provides 8 10/100M ports. It was
designed for easy installation and high
performance in an environment where traffic
is on the network and the number of users
increases continuously.
It consists of 8 PSE/PoE ports. That can solve
the limitation of the power outlet location and
offer the system designer a flexible solution to
locate the network device everywhere.
The compact rigid desktop size is specifically
designed for small to medium workgroups. It
can be installed where space is limited;
moreover, it provides smooth network
migration and easy upgrade the network
capacity.
Package Contents
Before you start to install this switch, please
verify your package that contains the following
items:
One PoE Web Smart Fast Ethernet Switch
One Power Cord
One CD (User’s Manual)
19” Rack Mount Kit
Note: If any of these items is found missing or
damaged, please contact your local supplier
for replacement.
Key Features
8 Port 10/100M Nway (Auto-negotiation)
Web Smart Switch
8 PSE/PoE function ports
Supporting the power Max. 15.4 W for each
PSE/PoE port
Desktop size with metal case
Can be installed in a 483mm (19”)
cabinet by rack-mount kits
Auto-learn of networking configurations
Auto-detect full/half-duplex modes for any port
Dedicated full-duplex 200Mbps bandwidth
Store-and-Forward switching methods
IEEE 802.3x flow control for full-duplex and
back-pressure flow control for half-duplex
Non-blocking & Non-head-of-line blocking
full wire speed forwarding
Auto-MDI/MDI-X function for any port
Smart plug & play
Front Panel (LEDs)
LED Status Description
Power On Power is on
Off Power is off
LINK/ACT On Connection established
Off No connection
Flashing Data is transmitting or
receiving
PoE On Port is linked to Power
Device
Off No Power Device is
connected
Connections
Switch/Hub to this 8 Port PoE Fast
Ethernet Switch
This switch provides automatic crossover
detection functionality for any port. It is
simple and friendly to up-link to another switch
without crossover cable.

PC/Other devices to this 8 Port PoE
Fast Ethernet Switch
Via a twisted pair cable straight through, this
switch can be connected to PCs, servers and
other network devices.
Power Device to this 8 Port PoE Web
Smart Fast Ethernet Switch and
getting 48V power source through Cat.
5 cables
Using Cat. 5 twisted-pair cable to connect
Power Device to the port 1~8 of this switch.
Then this switch will supply 48V power to
Power Device via Cat. 5 twisted-pair cable.
Please be noted Power Device should also
comply with IEEE 802.3af standard.
Rear Panel (Power)
AC input
AC input (100~240V/AC, 50~60Hz)
Technical Specifications
Standards
IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX
IEEE 802.3x
Full-duplex and Flow Control
IEEE 802.3ad
Trunk (Link Aggregation)
IEEE 802.3af
Power Over Ethernet (PoE)
IEEE 802.1Q VLAN
IEEE 802.1p Class of Service
IEEE 802.1x
Port Based Network Access
Control
IEEE 802.1d
Spanning Tree Protocol
IEEE 802.1w
Ra
p
id S
p
annin
g
Tree Protocol
Features
Number of Ports:8 PoE Ports
MAC Address: 4K
Buffer Memory: 1.625M bits
Method: Store and Forward
Filtering/
Forwarding Rates 100Mbps port – 148,800pps 10Mbps – 14,880pps
Transmission
Media 100BaseTX Cat. 5 UTP/STP
LED
Indicators
Per Port : LINK/ ACT,
PoE Port :ACT/ Status
Per Unit: Power
Power Input 100~240V/AC, 50~60Hz
Power Output 48V/DC Per Port Output –
15.4 W Max Per Port
Power
Consumption 130 Watts (Max)
Dimensions 266 × 160 × 44 mm
(L x W x H)
Weight 1.8 kg; W/Package: 2.2 kg
Operating
Temperature 0 to 40°C
Storage
Temperature -20 to 90°C
Humidity 10 to 90% RH
(non-condensing)
Certifications FCC ClassA, CE