Dinan D120-0491 User manual

L''
DINAN
ANTI.ROLL BAR
INSTALLATION INSTRUCTIONS
PART
NUMBER
DI2O.O49I
DESCRIPTION:
Rear
2lmm
Adjustable
APPLICATION:
2006-07M5
2006-07
M6
PARTSLIST
Qty Part# Description
I Dl22-049
| Anti-rollbar
I D
l33-0491 HardwareKit
Congratulations
for being
selective
enough
to useaDinan Engineering
anti-roll
bar. We
have
spentmanyhours
developing
this
anti-rollbarto assurethatyouwill receive
maximumperformance
and
durability
with minimum
difficulryininsallation.Please
take
thetimeto readtheseinstructions
and
callusifyou have
anydifficultiesduring
the
installation.
NOTES:
a) We highly
recommend
thatyoufirstread
andfullyunderstand
theseinstructions
beforebeginning
the installation.
b) Do notwork on vehicles
supported
by
a
jack
only. Usesecure
jack
stands!
L Jack
up
therearofthevehicle
andplace
jack
standssecurely
underthevehicle.
7. Note theorientationof the stockanti-rollbar. The Dinan
barwill beoriented
the
sameway.
3. Disconnect the anti-roll
bar
fromtheirendlinks.
tNs
t33-049
|Page
I of2 Rev.
l/28/08

4. Separatethe stock anti-roll barfrom vehicleby removingthe bushingclampsand
bushings.
Removestockanti-rollbarfrom car.
The DinanEngineering
anti-rollbarfitslike
the original.Carefullymaneuver
the
anti-rollbarinto place.
Attachanti-rollbarto vehicle
usingthe stockbushingclamps
andDinan urethane
bushings.Lubricate
the bushingswith the includedurethane
grease(or an
equivalenthigh-pressure,
waterproof, grease).The anti-roll bar shouldbe
centered
beareen
the clamps!
Attachendlinks
to the Dinananti-rollbar. SeeFigurefor adescription of the
adjustments.
o lf barisbeing
usedwith astocksuspension,
aftach
endlink to the lasthole(for
minimal
oversteer).
o lf barisbeing
used
with aDinan
suspension,
atach endlinksto the middlehole.
We hope
you
enjoyyournewDinan
Engineering
anti-roll
bar!
TEER
5.
6.
7.
ra
MORE
UNDERS
MORE
OVERSTEER
tNst33-049
tPage
2 of 2 Rev.
l/28/08