Dirt Devil 299e User manual

Dealer Name
Dealer Phone
Serial Number
9044-01 • 3/20
512 West Gorgas Street §Louisville, OH 44641-3912
www.dirtdevilcentral.com
Attention Installer: Please be sure this manual and warranty information
are left with the power unit or customer when installation is complete.
Operating Instructions For
Dirt Devil®Central Vacuums
Filtered Cyclonic Models:
299e, 599e, 799e & 999e
390, 690, 990 & 1490
CV1800, CV2200, CV2600 & CV3400
Disposable Bag Models:
DB3000, DB5000, DB7000,
DB8000 & DB9000
Read Manual Before Operating System
Read the owner’s manual thoroughly before operating to
ensure the most efficient use of the system.

Dirt Devil®Central Vacuum Systems
2
Models UL File Ref. # ETL File Ref. #
299e 77100 N/A
599e 77125 N/A
799e 77130 N/A
1099e 77250 N/A
390 77100 N/A
690 77125 N/A
990 77130 N/A
1490 77250 N/A
CV1800 77100 N/A
CV2200 77125 N/A
CV2600 77130 N/A
CV3400 77250 N/A
DB3000 N/A 77400
DB5000 N/A 77500
DB7000 N/A 77600
DB8000 N/A 77800
DB9000 N/A 88200

3
TABLE OF CONTENTS:
Important Safety Instructions ....................................................................... 3
Grounding Instructions ................................................................................. 5
General Information ...................................................................................... 6
Registration ................................................................................................... 6
Operating Instructions .................................................................................. 6
General Maintenance .................................................................................... 6
Emptying the Dirt Canister and Filter Maintenance .................................... 8
Troubleshooting ............................................................................................. 11
IMPORTANTES MESURES DE SECURITÉ .................................................... 12
INSTRUCTIONS DE MISE À LA TERRE......................................................... 14
Warranty ........................................................................................................ 17
This manual contains canister and maintenance instructions for two (2) different
filtration methods. Please be sure to follow the appropriate instructions for your
power unit model number (found on the front of the canister).
To find links to maintenance videos, downloadable manuals,
troubleshooting and warranty information or to register your system,
please visit www.centralvacservice.com.
IMPORTANT SAFETY INSTRUCTIONS
Read These Instructions Before Using This Vacuum System
Installation of this product should be made by a qualified, authorized
central vacuum dealer. Before installing, using, or servicing this product,
the installer should carefully read and fully understand the instructions
including all warnings, cautions, and safety notice statements. To
reduce the risk or personal injury, death and/or property damage, follow
all instructions for proper installation, operation and maintenance.
These instructions are not intended as a complete listing of all details
for installation, operation and maintenance. If you have any questions
concerning any of these procedures, STOP, and call an authorized central
vacuum dealer.

Dirt Devil®Central Vacuum Systems
4
When using an electrical appliance, basic precautions should always be
followed, including the following:
WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK OR INJURY:
• Unplug and disconnect power before servicing.
• Do not allow to be used as a toy. Close attention is necessary when used
by or near children.
• Use only as described in this manual. Use only manufacturer’s
recommended attachments.
• Do not use with damaged cord or plug. If appliance is not working as
it should, has been dropped, damaged, left outdoors, or dropped into
water, return it to an authorized servicing dealer.
• Do not pull or carry by cord, use cord as a handle, close a door on cord,
or pull cord around sharp edges or corners.
• Do not run appliance over cord.
• Keep cord away from heated surfaces.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• Do not handle system or appliance with wet hands.
• Use extra care when cleaning on stairs.
• Do not use on wet surfaces.
• Do not put any object into openings. Do not use with an opening blocked.
Keep openings free of dust, lint, hair and anything that may reduce
airflow.
• Keep hair, loose clothing, fingers, and all parts of body away from
openings and moving parts.
• Do not pick up anything that is burning or smoking, such as cigarettes,
matches, or hot ashes.
• Connect to a properly grounded outlet. See grounding instructions.
• Turn off all controls before unplugging.
• Do not use to pick up flammable or combustible liquids such as gasoline
or use in areas where they may be present.
• Do not place or store anything on top of power unit- overheating of motor
could occur.
• Any service work required under the top cover should be performed by
an authorized service representative.
• Do not operate without filter/disposable bag in place.
• Always turn off this appliance before connecting or disconnecting
motorized nozzle.

5
GROUNDING
INSTRUCTIONS
This appliance must be grounded.
If it should malfunction or break
down, grounding provides a path of
least resistance for electric current
to reduce the risk of electric shock.
This appliance is equipped with a
cord having an equipment-grounding
conductor and grounding plug.
The plug must be plugged into an
appropriate outlet that is properly
installed and grounded in accordance
with all local codes and ordinances.
WARNING
Improper connection of the
equipment-grounding conductor
can result in a risk of electric
shock. Check with a qualified
electrician or service person if
you are in doubt as to whether the
outlet is properly grounded. Do not
modify the plug provided with the
appliance. If it will not fit the outlet,
have a proper outlet installed by a
qualified electrician.
Models 299e, 599e, 799e, 390,
690, 990, CV1800, CV2200, CV2600,
DB3000, DB5000, DB7000 & DB8000
are for use on a nominal 120 volt
circuit and have a grounding plug
that looks like the plug in Fig. A.
Models 1099e, 1490, CV3400 &
DB9000 dual motor units are for use
on a nominal 240 volt circuit and
have a grounding plug that looks like
the plug illustrated in Fig. B.
Make sure that the appliance is
connected to an outlet having the
same configuration as the plug. No
adapter should be used with this
appliance.
CONNECT TO A PROPERLY GROUNDED OUTLET ONLY.
SAVE THESE SAFETY INSTRUCTIONS
Intended For Household and Light Commercial Use. Do not vent into a
wall, a ceiling, or concealed space of a building or structure.
WARNING:
Electric shock could occur
if used on wet surfaces.
CAUTION:
Do not use on a wet
rug or floor.

Dirt Devil®Central Vacuum Systems
6
GENERAL INFORMATION
The central vacuum is designed to vacuum ordinary household dirt and
dust. The systems are designed for dry pickup.
The central vacuum system is a network of inlet valves, 2” PVC tubing,
and low voltage wiring installed in the walls of your home. The dirt is
transported through the in-wall tube system back to the dirt canister
(removable lower portion of the power unit).
REGISTRATION
To register your Dirt Devil®Central
Vacuum System warranty in the
United States and Canada, register
online at www.cvacregistration.com
or fill out and mail the warranty
card located with this manual.
Proof of purchase or registration
of your Dirt Devil®Central Vacuum
System is required before any
warranty work will be performed by
an Authorized Dirt Devil®Central
Vacuum Dealer. Registration
ensures a fast and easy resolution
to your warranty requirements.
OPERATING
INSTRUCTIONS
Using the central vacuum system
is easy. For standard systems,
simply raise the inlet valve lid,
insert the hose end and attach the
desired cleaning tool to the hose
wand. The power unit is activated
when the hose is inserted into the
valve. Please refer to accessory
instructions for further specifics on
usage.

7
7
GENERAL POWER UNIT MAINTENANCE
The simple care and maintenance instructions included here will help
ensure trouble-free use of your central vacuum system.
• Do not place objects on top of the power unit. The motor could overheat.
• Do not allow the motor to remain ON unless a hose is connected or an
inlet valve is open. If airflow is not permitted to flow through fan blades,
motor damage could occur.
• Do not operate without the filter in place (models 299e, 599e, 799e,
1099e, 390, 690, 990, 1490, CV1800, CV2200, CV2600 & CV3400). Change
the filter at least once per year.
• Do not operate without a disposable bag in place in models DB3000,
DB5000, DB7000, DB8000 & DB9000. Use disposable bag PN 9637 in
model DB3000 and PN 9520 in models DB5000, DB7000, DB8000 &
DB9000.
• Empty the dirt canister/bag when it is 2/3 full.
• The power unit does not require any lubrication.
• The exterior of the power unit can be wiped with a clean, dry cloth. Do
not use liquid cleaners or water as an electrical shock may occur.
• For additional service contact the qualified servicing dealer written on
the front of this manual or locate an authorized dealer online at
www.dirtdevilcentral.com.

Dirt Devil®Central Vacuum Systems
8
EMPTYING THE DIRT CANISTER & REPLACING
THE FILTER
For Filtered Cyclonic™ Models: 299e, 599e, 799e, 1099e, 390, 690, 990,
1490, CV1800, CV2200, CV2600 & CV3400
The dirt canister is the removable lower portion of the power unit. The
canister needs to be removed and emptied when it is 2/3 full. The filter
should be replaced at least once a year.
NOTE: When the dirt canister is removed the cyclonic cone
will be visible. The cone is held in place with a friction seal
designed to hold the cone to the body of the power unit
when the canister is removed. The cone can be removed
by pulling on it. This allows access to the filter.
Follow These Steps (refer to Figures 1-4)
Make sure the power unit is OFF.
1. Unlatch and remove the dirt canister. Latches are located on opposite
sides of the power unit. (Fig. 1)
2. Remove the cyclonic cone. (Fig. 2)
3. Turn the filter latch (counter-clockwise) on the bottom of the filter and
align it with the slots in the filter base. (Fig. 3)
4. Remove the filter and gently tap it on the inside of the dirt canister to
remove the loose dirt and debris. The filter should be replaced at least
once a year. If it is time to replace it, models 299e, 599e, 799e, 390, 690,
990, CV1800, CV2200 and CV2600 can use any of the 7" or 10" filters.
Models 1099e, 1490 and CV3400 can use either 10" filter available. (Fig. 4)
7" Filter - 8106-01, 10" Filters - 8107-01, 8107-01-HEPA
5. Lock the filter in place by turning the filter latch clockwise until you feel
it snap into place. (Fig. 3)
6. Dispose of the dirt and debris captured in the dirt canister.
7. Seat the cyclonic cone on the dirt canister.
8. Raise the dirt canister to the base of the power unit and engage the
latches. Be certain the dirt canister is seated properly to the gasket on
the body of the power unit.

9
FIG. 3
FIG. 1
FIG. 4
FIG. 2

Dirt Devil®Central Vacuum Systems
10
BAG REMOVAL & REPLACEMENT
For Disposable Bag Models: DB3000, DB5000, DB7000, DB8000 & DB9000
The dirt canister is the removable lower portion of the power unit.
Follow These Steps (refer to Figures 1-4)
Make sure the power unit is OFF.
1. Unlatch and remove the dirt canister. Latches are located on opposite
sides of the power unit. (Fig. 1)
2. Remove the used bag by rotating the cardboard header and pulling
down from the plastic bag adapter. (Fig. 2)
3. Pull off reorder information and seal the bag opening with adhesive
flap. Discard used bag. (Fig. 3)
4. Install new bag by folding over the flap, exposing the hole in cardboard
header. Do not remove reorder information from flap until ready for
disposal. Align the slots in the cardboard header with the tabs on the
plastic bag adapter. Push the cardboard header firmly onto the adapter
and rotate 45° to ensure that the slots are no longer aligned with the
tabs. (Fig. 2)
5. Raise the dirt canister to the base of the power unit and engage the
latches. Be certain the dirt canister is seated properly to the gasket on
the body of the power unit. (Fig. 4)
FIG. 3
FIG. 1
FIG. 4
FIG. 2