Discount Car Stereo IP-BKRCD User manual

Courtesy of: DiscountCarStereo.com
Serving the internet community since 1995
IP-BKRCD/3.5-BKRCD
IPOD & AUX ADAPTER QUICK START GUIDE FOR BECKER WITH CD CHANGER
Revised: July 20, 2021

Introduction:
These adapters are compatible with any Becker radio and functioning CD
changer and particularly great for radios that do not have an AUX menu option
including PCM1 (BE2580), CR210, CDR210, CR31, CR22, CDR22, CDR21, CR11 etc. The
CD changer remains connected but will no longer play.
The iP-BKRCD adapter allows users to connect, play and charge all Apple 30-
pin connecting devices.
The 3.5-BKRCD adapter allows users to connect and play any audio device with
a 3.5mm Jack. With the storage capacity of most portable devices sacrificing
the CD Changer should be an easy decision.
Installation:
Most Becker radios are coded and will not operate without
the code. Do not proceed to step 4 if radio code is not
available otherwise radio will not operate upon
reconnection.
1. Remove radio from dashboard to gain access to the connectors.
2. Removal tools (See Fig. 1) required to remove these radios (except
PCM1) and are available separately
BRRT
GRRT
Fig. 1
Radio removal tools
Fig. 2
3. Slide tools into radio slots (51) with straight edge facing away.
Withdraw radio by pulling outwards. With radio removed, press
retaining spring to release keys. See Fig. 2.
For detailed radio removal instructions, click here.
4. For aux installation, disconnect BLUE plug from radio C-3 chamber
(See Fig. 3) (pinch blue tab to release)
5. For iPod installation disconnect yellow (C-1), green (C-2) and blue (C-3)
plugs from radio (See Fig. 3)
Alert! Yellow plug present only in vehicles with amplifies;
otherwise C-1 chamber will be empty.
Fig. 3
Radio connectors

Fig. 4
iP-BKRCD
Fig. 5
3.5-BKRCD
6. IP-BKRCD:
Connect YELLOW, BLUE, GREEN plugs (See Fig. 4) to C-1, C-2 and C-3
radio chambers vacated in step 5.
7. Connect factory YELLOW, BLUE, GREEN plugs removed in step 5 to 20-
pin RED connector (See Fig. 4)
8. 3.5-BKRCD:
Connect BLUE plug (See Fig. 5) to radio chamber C-1 vacated in step 4.
9. Carefully route 30-pin dock connector OR 3.5mm jack (See Fig. 5) to
glove box, center armrest or location where the audio device will
reside
Fig.5
30-pin dock/3.5mm jack
Test Operation
1. iP-BKRCD: Connect Apple 30-pin device (iPod, iPhone) to dock
connector
2. Apple device will begin charging
3. 3.5-BKRCD: Connect audio device to the 3.5mm plug
4. Turn radio “ON” press “CD”button
5. Select favorite track using audio device built-in controls.
Playlist and Track selection is *NOT* possible from the
radio. You must use the Audio device built-in controls to
access music files.
6. Use radio volume button to set playback level
7. If successful proceed to re-install radio. (Removal Tools not required
for installation.
These adapters require a working CD changer to work as
described. Porsche PCM1 (BE2580), CR-210, CDR-210, CR-
22 and CDR-22 and other Becker radios do not have AUX
ports and for that reason a CD changer is required.
Do not purchase this part if vehicle does not have a
functioning CD changer which remains connected but
will no longer play.
Disclaimer
• This product has no affiliation with Porsche, Becker or Apple
• We’re not liable for misuse of this product.
•We recommend professional installation.
©1995-2021-07-20 Discount Car Stereo. All rights reserved. Information in this
document is subject to change without notice. Other products and companies referred
to herein are trademarks or registered trademarks of their respective companies or
mark holders.