Disney DCM-8 User manual
1
2
IMPORTANT SAFEGUARDS
When using electrical appliances especially when children are present, basic safety precautions should always be followed to reduce the
risk of re, electric shock, and/or injury to persons, including the following:
1. READ ALL INSTRUCTIONS.
2. Do not touch hot surfaces. Metal parts will become hot during use. Use any handles or knobs.
3. To protect against electrical shock, do not place cord, plug or appliance in water or other liquid.
4. This product should not be used by children. Close supervision is necessary when any appliance is operated near children.
5. Unplug from outlet when not in use and before cleaning. Allow to cool completely before moving, putting on or taking off parts, or
before cleaning.
6. Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner.
Return appliance to the nearest authorized service facility for examination, repair or adjustment.
7. The use of accessory attachments not recommended by the appliance manufacturer may cause injury.
8. Do not use outdoors.
9. Do not let cord hang over edge of table or counter or touch hot surfaces.
10. Do not place on or near a hot gas or electric burner, or in a heated oven.
11. Extreme caution must be used when moving an appliance containing hot oil, water or other hot liquids.
12. Do not use appliance for other than intended use.
13. Do not operate while unattended.
14. To disconnect remove plug from wall outlet
SAVE THESE INSTRUCTIONS
3
4
This appliance is for HOUSEHOLD USE ONLY. It may be plugged into an AC electrical outlet (ordinary household current). Do not use
any other electrical outlet.
DO NOT OPERATE APPLIANCE IF THE LINE CORD SHOWS ANY DAMAGE, OR IF APPLIANCE WORKS INTERMITTENTLY OR
STOPS WORKING ENTIRELY.
A short power-supply cord (or detachable power-supply cord) is to be provided to reduce the risk resulting from becoming entangled in
or tripping over a longer cord. Longer extension cords are available and may be used if care is exercised in their use. If an extension
cord is used,
1) The marked electrical rating of the extension cord should be at least as great as the electrical rating of the appliance, and
2) The cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped
over unintentionally.
POLARIZED PLUG
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to t into
a polarized outlet only one way. If the plug does not t fully into the outlet, reverse the plug and try again. If it still does not t, contact a
qualied electrician. Do not attempt to modify the plug in any way.
LINE CORD SAFETY TIPS
1. Never pull or yank on cord or the appliance.
2. To insert plug, grasp it rmly and guide it into outlet.
3. To disconnect appliance, grasp plug and remove it from outlet.
4. Before each use, inspect the line cord for cuts and/or abrasion marks. If any are found, this indicates that the appliance should be
serviced and the line cord replaced.
5. Never wrap the cord tightly around the appliance, as this could place undo stress on the cord where it enters the appliance and
cause it to fray and break.
5
IMPORTANT
During the rst few minutes of initial use, you may notice smoke and/or a slight odor. This is normal and should quickly disappear. It will
not recur after appliance has been used a few more times.
WARNING: THIS PRODUCT IS NOT A TOY. For your safety, always read and understand the Use and Care Manual before attempting
to use any electric appliance.
BEFORE USING:
1. Carefully unpack the cake pop maker and all parts. Remove all packaging materials, including those which may be inside the
product.
2. Wipe exterior surfaces with a soft, damp cloth to remove dust particles collected during packing and handling. Dry thoroughly. Do
not use abrasive cleaners. Clean the interior with a warm, soapy cloth. Rinse with a clean, damp cloth and dry thoroughly. NEVER
IMMERSE THE PRODUCT, CORD OR PLUG IN WATER OR ANY OTHER LIQUID.
Solid surface countertops can be easily scratched, cracked, scorched, or damaged, especially when exposed to heat. To prevent
damage, the following precautions should be observed when using this product:
• Always use a trivet under heat generating sources such as Slow Cookers, Toaster Ovens, Skillets, etc.
• Do not place hot pans, pots, ceramic or stoneware inserts, etc. directly on the countertop surface.
OPERATING INSTRUCTIONS
1. Place the cake pop maker on a at, level, heat-resistant surface.
2. Plug the power cord into a 120V AC electrical outlet. The light icon will illuminate red.
3. Lightly glaze both cooking plates with a small amount of vegetable oil or a non-stick spray, close the lid and allow the cake pop maker
to heat.
4. After approximately 3 to 5 minutes, the cake pop maker has heated to the proper temperature and is ready for use.
5. Using the piping bag provided, slowly pour batter into lower cooking plate lling the larger reservoirs rst followed by the ears. Use
6
caution not to overll the plates. CAUTION: Cooking surface is HOT. Always use an oven mitt or pot holder when handling
hot surfaces. Handle with care.
6. Lower the lid. Press down slightly so the latching handle is secured. Approximate cooking time will be 3 to 6 minutes, depending
on ingredients.
7. With oven mitts or pot holder release the lid latch and open the cake pop maker lid.
8. Remove the cooked cake pops with a heat-resistant plastic utensil (non-metallic). Use caution not to scratch or damage the nonstick
surface. CAUTION: Use caution when removing cake pops as they will be very hot.
9. Unplug the power cord and allow the cake pop maker to cool before moving, cleaning or storing.
CLEANING AND STORAGE
This appliance requires little maintenance. It contains no user-serviceable parts. Do not attempt to repair it yourself. Any servicing that
requires disassembly, other than cleaning, must be performed by a qualied appliance repair technician.
TO CLEAN:
Be sure the cake pop maker is unplugged and completely cool before cleaning. Wipe the exterior with a clean, damp cloth. Do not use
abrasive cleaners or harsh chemicals. Do not put cord or plug in water or other liquids. Clean the interior with a warm, soapy cloth. Rinse
with a clean, damp cloth and dry thoroughly. Do not use abrasive cleaners or harsh chemicals. Do not use sharp or metal objects to clean
as they may damage the non-stick or other surfaces.
TIP: Should any batter become baked onto the cooking plates, pour a small amount of cooking oil onto the batter. Allow it to soak for
about 5 minutes so the batter will soften. Wipe away with a damp paper towel or soft cloth.
TO STORE:
Be sure all parts are clean and dry before storing. Store appliance in its box or in a clean, dry place. Never store it while it is hot. Never
wrap cord tightly around the appliance; keep it loosely coiled.
7
CAKE POP HINTS AND SUGGESTIONS
• Use the provided piping bag & tip to ll the cooking reservoirs.
• Refrigerated batter may need some water or milk added to the mixture, as cold batter can thicken. Cold batter may also require a
longer cooking time to reach the desired doneness.
• For evenly shaped cake pops, squeeze the batter into the center of the cooking plate and spread the batter to the ears of the cake
pop.
• Do not overll the cake pop grids.
• Use a heat-resistant non-metallic utensil to remove the cake pops.
• Baked cake pops will be darker on the bottom half when compared to the top half. This is a result of the batter rising. The bottom
halves of the cake pops are in closer contact to the cooking plates compared to the upper halves.
• For glazing or coating, use a deep, narrow bowl so cake pops can be submerged completely in the glaze or coating.
• To coat 1 dozen cake pops, about ½ cup of coating is needed.
• Coating should be kept warm and thin enough so that it ows over the entire cake pop. If candy melt coating becomes too thick, thin
with 1 to 2 tablespoons of shortening and melt according to package directions. If coatings begin to thicken or cool while decorating,
place coating back in the microwave for 10 to 15 seconds on HIGH power.
• For best decorating results, after cake pops have cooled, place them in the freezer for 15 minutes or until well chilled, then dip quickly
in the warm coating.
• To help keep the cake pop on the paper lollipop stick, die ½” to 1” of thestick in the melted candy melts and then insert it into a chilled
cake pop.
• Dip cake pops in the coating once and hold over the bowl to allow excess to drip back into the bowl. Work gently so cakes do not
break apart or shake off the stick. Repeat dipping will cause the coating to become thick and heavy.
• To help set the coating, palce the decorated cake pop in the freezer for 5 minutes.
• Purchase additional sticks from craft and hobby stores, or stores specializing in cake decorating or candy making.
• Use your favorite store bought mix for the cake pops.
• To decorate the Mickey cake pop, dip the entire cake pop in red coating. Once dry, dip halfway in the black coating to creat the hat.
Add eyes to complete.
8
ONE YEAR LIMITED WARRANTY
SELECT BRANDS, INC. warrants, subject to the conditions stated below, that from the date of purchase, this product will be free from
mechanical defects for a period of one (1) year. SELECT BRANDS, INC., at its option, will repair or replace this product found to be
defective during the warranty period. Should this product become defective by reason of improper workmanship or material defect during
the specied warranty period, Select Brands, Inc. will repair or replace the same effecting all necessary parts replacements for a period
of one year from the date of purchase.
Transportation charges on parts, or products in whole, submitted for repair or replacement, under this warranty, must be borne by the
purchaser.
CONDITIONS: This warranty is valid for the original retail purchaser from the date of initial retail purchase and is not transferable. Keep
the original sales receipt. Proof of purchase is required to obtain warranty service or replacement. Dealers, service centers, or retail
stores do not have the right to alter, modify or in any way, change the terms and conditions of this warranty.
Warranty registration is not necessary to obtain warranty on Select Brands, Inc. products. Save your proof of purchase receipt.
ABOUT YOUR PRODUCT WARRANTY: Most warranty repairs are handled routinely, but sometimes requests for warranty service
may not be appropriate. For example, warranty service would NOT apply if the product damage occurred because of misuse, lack of
routine maintenance, shipping, handling, warehousing or improper installation. Similarly, the warranty is void if the manufacturing date
or the serial number on the product has been removed or the equipment has been altered or modied. During the warranty period, the
authorized service dealer, at its option, will repair or replace any part that, upon examination, is found to be defective under normal use
and service.
NORMAL WEAR: This warranty does not cover normal wear of parts or damage resulting from any of the following: Negligent use or
misuse of the product; Improper voltage or current; Use contrary to the operation instructions; Deviation from instructions regarding
storage and transportation; Repair or alteration by anyone other than SELECT BRANDS, INC. or an authorized service center. Further,
the warranty does not cover Acts of God, such as re, ood, hurricanes and tornadoes.
SELECT BRANDS, INC. shall not be liable for any incidental or consequential damages caused by the breach of any express or implied
9
warranty. Except to the extent prohibited by applicable law, any implied warranty of merchantability or tness for a particular purpose is
limited in duration to the duration of the above warranty. Some states, provinces or jurisdictions do not allow the exclusion or limitation of
incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusion may not
apply to you. This warranty gives you specic legal rights, and you may also have other rights that vary from state to state or province
to province.
HOW TO OBTAIN WARRANTY SERVICE: You must contact SELECT BRANDS, INC. Customer Service at 1-913-663-4500. A Customer
Service representative will attempt to resolve warranty issues over the phone. If telephone resolution is not possible, the Customer
Service representative will require your assistance in performing routine diagnostic procedures. This warranty is effective for the time
periods listed above and subject to the conditions provided for in this policy.
10
CHOCOLATE CAKE POPS:
Ingredients:
• ¾ cups all-purpose our
• ½ cup sugar
• 3 tablespoons cocoa
• ½ teaspoon baking soda
• ¼ teaspoon baking powder
• ¼ teaspoon salt
Directions:
1. Preheat cake pop maker. Combine our, sugar, cocoa, baking soda, baking powder and salt in a mixing bowl. Add buttermilk, vegetable oil, egg and
vanilla. Using a mixer, blend until smooth. Add coffee and continue mxiing until coffee is evenly incorporated into mixture.
2. Fill each cooking reservoir with batter using the piping bag. Bake 4-5 minutes or until a toothpick inserted into a cake pop comes out clean.
3. Allow to cool and coat, as desired.
Makes about 2 ½dozen cake pops
Tip: If you don’t have buttermilk on hand, pour ¾teaspoons lemon juice or vinegar into a glass measuring cup. Add milk to equal ¼cup. Allow to stand 5
to 10 minutes, then use in place of buttermilk in this recipe.
VANILLA CAKE POPS:
Ingredients:
• 1 ½ cups all-purpose our
• 1 teaspoon baking powder
• ¼ teaspoon salt
• ½ cup butter, softened
• 1 cup sugar
Directions:
1. Preheat cake pop maker. Combine our, baking powder and salt in a mixing bowl and set aside. In a separate bowl, beat together butter and sugar
until light and creamy. Beat in eggs and vanilla.Alternately blend in our mixture and milk into butter mixture, beginning and ending with the our
mixture.
2. Fill each cooking reservoir with batter using the piping bag. Bake 4-5 minutes or until a toothpick inserted into a cake pop comes out clean.
3. Allow to cool and coat, as desired.
Makes about 3 dozen cake pops
• ¼ cup buttermilk
• 3 tablespoons vegetable oil
• 1 egg
• ½ teaspoon vanilla extract
• ¼ cup freshly brewed hot coffee
• Coating of choice
• 2 eggs
• 2 teaspoons vanilla
• ½ cup milk
• Coating of choise
11
Frosting Dip:
Ingredients:
• 1 container (16 ounces) Creamy Chocolate, Vanilla or Lemon Frosting
• ½ cup semi-sweet chocolate or vanilla chips *
Directions:
1. Spoon frosting into deep microwave safe bowl. Microwave on HIGH power (100%) for 1 minute. Stir well. Blend in chips. Microwave on HIGH power
(100%) for 1 minute.
2. Allow to stand 2 to 3 minutes. Stir. Microwave on HIGH power (100%) for an additional 10 to 15 seconds if necessary to melt chips. Stir until smooth.
3. Dip cake pops in warm frosting dip.
4. Microwave on HIGH power (100%) for 10 to 15 seconds as needed to keep a glaze consistency.
Makes about 1⅔cups of frosting
Tip: Choose complimentary avors of frosting and chips. For example, blend semi-sweet chocolate chips into chocolate frosting or vanilla chips into vanilla
or lemon frosting.
Vanilla Glaze:
Ingredients:
• ¼ cup melted butter
• 1¼ cups confectioners’ sugar, sifted
• 1 teaspoon vanilla
• 2 to 2½ tablespoons hot water
Directions:
1. Combine melted butter with confectioners sugar, stirring until well blended.
2. Stir in vanilla.
3. Blend in 2 tablespoons hot water and stir until smooth.
4. Add a little of the remaining hot water, if needed, to make a thin glaze consistency.
Makes about ¾cup of glaze
Tip: Vanilla glaze is perfect to use on donuts and will remind you of glazed donuts from a local donut shop.
12
Table of contents
Other Disney Kitchen Appliance manuals
