User Manual in Original
Dok. ref: 550A_GKF_am_sv_210525
DISPERATOR AB Tel: 08-724 0160 E-mail: info@disperator.se
Mälarvägen 9, 141 71 Segeltorp Web page: www.disperator.se
8 / 35
3. Product Description and Technical Specication
3.1. Glass Crusher Model 550A-GKF
A Disperator glass crusher makes the work of handling empty boles, jars and other glass containers
easier by grinding them into small parcles of gravel size. Most kitchens, galleys and bars have problems
with the volume of glass containers, which also gets sharp if it breaks uncontrollably.
Collecng and transporng glass waste is me consuming due to the large volume. Floor space that could
be used beer is occupied by a mountain of empty boles. These problems diminish when a Disperator
glass crusher is used.
Model 550A-GKF is easy to install in a kitchen, galley or waste room. Alternavely, the glass crusher can
be installed on a lower oor near the waste collecon area, and fed with empty boles through a tube
from bar or kitchen on the oor above.
Disperator glass crusher 550A-GKF is designed to provide long service life in environments where
reliability and eciency are essenal.
2. Company Prole
Disperator’s business idea is to provide innovave and adapve equipment for kitchens on land as well
as galleys at sea, and for the food processing industry, which enables ecient collecon of communited
food leovers for anaerobic digeson or composng in subsequent stages, which is of benet to society.
With over 70 years of experience in the development and producon of such equipment, our devoon
to this has resulted in the unique operaonal reliability required for the extreme condions prevailing in
the marine industry. Furthermore, our innovaveness has provided commercial kitchens on land with an
alternave approach to handle food waste separaon at source, complying with modern demands and
being economically aordable.
Our product assortment is unique! Disperator can as the only manufacturer of such equipment oer
all types of installaon possibilies needed in a kitchen. Our basic range of ve dierent series of
water-based food waste disposers, consisng of three to six dierent sizes in each serie, which may be
combined with as many as 13 dierent mounng assemblies. Furthermore, the advantage of the basic
model’s design is that the waste disposers may easily be integrated into other kitchen manufacturer’s
mounng assembly or furniture. Thereby, each workplace in a kithen or galley can be designed to its
specic requirements regarding funcon, ergonomics and economy. To all this there is also the dierent
series of water-saving processor technology for collecon and storage of grinded food waste in a tank, as
well as disposers that grinds food waste without any ushing water at all.
