Displays2go DF043NLB User manual

1 / 28
User Manual V22.01
Model: DF043NLB,DF043TLB
Product Name: 43inch Floor Standing Digital Signage, Non Touch
Scan QR code to visit the product page:
Operating Instructions for Digital Signage
Note: Before using the product, please read the instructions carefully!
Do not attempt to disassemble this product. If the product does not work properly, please call
our Customer Service Department at 1-844-221-3393.
43inch Floor Standing Digital Signage, IR Touch

2 / 28
Contents
Features ................................................................................................................................ 3
Safety Warnings and Precautions ........................................................................................... 3
Assembly and Connection...................................................................................................... 5
Packing List.................................................................................................................................... 5
Interfaces ...................................................................................................................................... 6
HDMI Input Feature ......................................................................................................................6
Steps for Unpacking ......................................................................................................................7
Wheel and base installation steps ................................................................................................8
Remote Control ..................................................................................................................... 9
Description of Basic Operation ............................................................................................. 10
Power on/Standby ......................................................................................................................10
About Launch Desktop................................................................................................................10
Description of Wallpaper Switch.................................................................................................10
File Manager ...............................................................................................................................11
Local Settings ..............................................................................................................................11
Status of Menu bar .....................................................................................................................12
Screen Rotate..............................................................................................................................13
Choose System Language............................................................................................................14
Factory Reset...............................................................................................................................15
DiViEx APP Introduction
....................................................................................................... 16
System requirements ..................................................................................................................16
How to upload media files ..........................................................................................................16
Setting .........................................................................................................................................18
Edit picture..................................................................................................................................18
Music...........................................................................................................................................21
Technical Specifications........................................................................................................ 22
Troubleshooting .................................................................................................................. 24
Cleaning and Maintenance................................................................................................... 26
Names and Contents of Toxic and Hazardous Substances or Elements in the Product ............. 27
FCC STATEMENT................................................................................................................... 28

3 / 28
Features
1. Embedded with Android 11 smart operating system and unique UI design, bringing you a more
convenient operation and better visual experience.
2. Support USB mouse and keyboard, realizing easy manipulation like a computer. Using a mouse for set
up is recommended.
3. Built-in Wi-Fi module, high capacity memory and high capacity cache, making it smoother to watch
1080P HD movies and play big games.
4. High-quality LCD screen as the display, no flicker, low radiation, greatly reducing eye fatigue, eye
protection, high brightness, high contrast, and wide viewing angle, ultra-fast response time greatly
reduces ghosting of fast moving images.
5. Progressive image processing and industry-leading motion compensation technology improve the
flickering and blurring in the edges of motion picture.
6. Dynamic contrast technology can significantly improve the clarity and contrast of various screens.
7. Multi-channel USB interfaces, supporting HD media streaming.
Safety Warnings and Precautions
Thank you for purchasing the high-performance multi-functional LED backlight Digital Signage from
Displays2Go. We have considered the factors to ensure personal safety in product design and have tested
rigorously at the factory. However, improper installation and use may result in electric shock and fire.
In order to safely use, maximize performance of the unit and extend the life of the product, please read
and follow all instructions carefully before using the product.
Keep the instructions for future reference.
We strongly recommend using a surge protector, or a power strip with internal circuit breaker to
prevent damages to the digital signage.
Symbol Legends:
Warning: May cause personal injury or death
The operation is prohibited
Caution: May cause damage or property loss
If any of the following occurs:
Power outage or instable voltage.
Abnormal sound or smell from the unit.
AC power cord is damaged.
Digital Signage is damaged due to drop, knock or impact.
Any liquid or foreign matters fall into the enclosure.
Turn off the Digital Signage immediately, pull out the plug from the power outlet, and ask the
authorized personnel for maintenance timely.
If coal gas or other flammable gas leaks, do not pull out the plug of the LCD Digital Signage or other
electrical appliances, instead, turn off the gas valve immediately, and open the doors and windows quickly.

4 / 28
Cut off the power supply before connecting or disconnecting any cables.
Do not place the Digital Signage on any instable positions, or else it may be damaged or cause fire.
Do not place the Digital Signage in the positions such as:
1. The environment subject to direct strong sunlight, moisture, extreme temperature or too much
dust,
2. The environment with flammable or explosive materials,
3. The environment with flammable or corrosive gases,
Do not use damaged or inappropriate power outlets, and ensure that the plugs and outlets contact
properly.
Do not let dust or metal deposits adhere to the plugs and outlets.
Do not damage the power cords:
1. Do not modify the power cords,
2. Do not place heavy objects on the power cords,
3. Keep the power cords away from heat source,
4. Do not pull the cord to remove the plug.
Do not connect too many plugs to one outlet in parallel, or else it may cause fire due to excessive
power consumption.
Do not approach the Digital Signage with open flame (e.g. a lighted candle), or else it may cause electric
shock or fire.
Do not put any sharp objects, metal or liquid into the vents or let them touch the signal terminals to
avoid short circuit, product damage, and electric shock.
The openings in the enclosure are designed for ventilation and cooling, to ensure long time reliable
running of components inside the enclosure and prevent overheating. Do not block the openings when
place the unit.
Do not touch the plugs with wet fingers, or else it will cause electric shock.
Do not use the Digital Signage in stormy weather, especially when there is lightning, instead, please
disconnect the power and antenna plugs to avoid lightning strike.
Do not disassemble the Digital Signage without permission, or else it may cause electric shock or fire.
Please ask qualified technician for repair.
WARNING

5 / 28
Do not let children climb onto the Digital Signage.
Keep the small parts away from children to prevent them from swallowing.
If the Digital Signage won’t be used for a long time, please turn it off and pull out the power plug.
To adjust the position of the Digital Signage, please disconnect all power cords and move slowly to
avoid tip over.
Do not scratch or knock the LCD with hard object, or twist and squeeze the LCD.
Do not turn on the unit immediately when it is moved from a place with low temperature to high
temperature, or else it will cause condensation and malfunction.
Before cleaning the Digital Signage, please pull out the power plug, wipe with soft cloth, do not use
industrial chemicals, prevent foreign matters from entering the machine. Improper cleaning (such as
cleaning solution, water) may damage the product, erase the printed information, and even cause
damage of the components if fluid flows in, resulting in machine failure.
If the unit displays the same screen for a long time or the moving picture has fixed text or icon, it will
leave ghosting on the screen and won’t disappear when the unit is turned off, it is normal and isn’t
covered by the warranty.
The power of the Digital Signage can be cut off by pulling out the plug.
If the LCD screen ruptures and the liquid splashes on the skin, please rinse for 15 minutes with clean
water immediately, and consult your doctor.
To carry the Digital Signage with hands, please grab and hold the edges, do not apply pressure on the
panel.
Use the Digital Signage properly: Use in proper lighting conditions, insufficient lighting or long time
watching will impair your eyesight.
Unplug device to disconnect from power.
Insert the plug into the outlet properly, or else it may cause sparks and fire.
The technical specifications printed herein and on the packaging are subject to change without prior
notice. The Manual may be slightly different from actual operation, and the latter is applicable.
Assembly and Connection
Packing List
Name
Quantity
Name
Quantity
Digital Signage 1 Operation Manual 1
Remote Control
1
Power Cord
1
Keys
2
WIFI Antenna
1
Cleaning Kit Towel and Glove 1
Touch Pens(Touchless products do
not provide touch pens) 2
Base screw package
L-Shaped Wrench (1)
Hex Screws M10*30 (8)
Shim M10(8)
1
Wheel screw package
Cross screwdriver (1)
Cross head pad screw M6*12 (16)
1
Note:
Contact Displays2Go if you have questions about the operation, debugging and connection of the unit, if the unit doesn’t work
normally, please cut off the power immediately and consult the dealer. The unit is class-A product, which may cause radio
CAUTION

6 / 28
interference in living environment. In this case, please take feasible measures, and use power plug as the disconnection device.
Interfaces
1. USB interface * 3, 2. RJ45 interface(Ethernet), 3. HDMI input, 4. Socket,5. Switch,
Note: Please pull out the power plug before installing or disassembling the unit!
HDMI Input Feature
1. Connect another media player or PC via HDMI Port on the device.
2. Click the Main Apps button “ ” in the Home page to enter the “APPS” menu interface (Fig. 1),
3. Click the "HDMI in" (Figure 2)
4. Figure 3 shows the display interface of connecting laptops.
Note: Some media players may not be supported
Fig. 1 Fig. 2 Fig. 3
1
2
3
5
4

7 / 28
Steps for Unpacking
1. Open the top cover as shown in Fig. 2,
Fig. 1 Fig. 2
1. Take out the base from the package as shown in Fig. 3,
2. Carefully lift out the unit as shown in Fig. 4 and place it on the shipping box (avoid scratching), the
unpacking is completed, as shown in Figure 5.
Fig. 3Fig. 4
Fig. 5

8 / 28
Wheel and base installation steps
1. Install 4 casters in the corresponding holes at the bottom of the base (Fig. 2), so that the casters are
installed on the base (Fig. 3). Tighten all casters with the supplied screwdriver.
Fig. 1Fig. 2Fig. 3
2. Connect the base screws to the product base and the product body, and tighten all the base screws
with an Allen wrench.
Fig. 4Fig. 5
3. The assembly is finished:
NOTE: Casters can be locked for safety.
Casters active state
Casters in stationary
state：Push the
brake down

9 / 28
Remote Control
Installing batteries for the remote control:
Remove the battery cover and insert two AAA batteries (1.5V). Ensure that the battery polarity matches the
“+”/“-” marks in the battery compartment of the remote control.
Precautions for using the remote control:
Aim the remote control at the receiver window. Do not place any object between the remote control and
the receiver window to avoid interference with the normal operation.
Keep the remote control away from violent vibration. In addition, do not set or place the remote control in
direct sunlight, or else the remote control may be deformed by heat.
The remote control may be invalid when the receiver window of the unit is in direct sunlight or strong
lighting, in this case, please adjust the angle of the lighting or the unit or approach the receiver window to
use it.
The distance of remote control will be shortened if the battery voltage is insufficient, in this case, please
replace with new batteries, if the remote control won’t be used for a long time or the batteries are run out,
please take out the batteries to avoid corrosion due to battery leakage, which will damage the remote
control.
Do not use batteries of different types or mix new batteries with old ones. Always replace the batteries in
pairs.
Do not put the batteries in fire, or charge or disassemble them, or charge, short circuit, disassemble, heat or
burn used batteries. Please dispose of waste batteries in accordance with local environmental regulations.
Do not expose the batteries in overheated environments such as sunlight and fire.
Description of remote control buttons:
Button Function
Power switch
To show the Source menu
Mute
Turn up the volume
Turn down the volume
OK Confirm selection
▲To move the cursor up
▼
To move the cursor down
◄To move the cursor left
►
To move the cursor right
Switching options
Home button
Go back to the parent menu
MENU To show the main menu
SETUP To set up OSD menu
Note: Press the SETUP button in the main interface to call out the OSD menu. After exiting the
playback mode by pressing the STOP button, the playback will start according to the schedule next time.
Remark: The real appearance of the remote control may be different from the picture, please refer
to the actual product.

10 / 28
Description of Basic Operation
Power on/Standby
Insert the power plug into the outlet. If the Digital Signage has the switch button “I”, turn it on, if you press the
switch button “O”, the Digital Signage enters standby state.
In power on state, enter “System Assistant” and press the “” button on the remote control, and the Digital
Signage enters standby state.
About Launch Desktop
Description of Desktop Icons
Icon
Function
Main applications
Sound -
Back
Home page
Background applications
Sound +
Description of Wallpaper Switch
We suggest using a mouse to change the wallpaper.
Connect a mouse with the digital panel through USB port, then follow the steps below:
1. click “Setting”
2. At the setting menu, click “Display”
3. At the Display setting menu, click “Gallery”, or “Wallpaper”
4. Then select an image you would like to set up as background.
5. Confirm the selection by clicking “Set wallpaper”.

11 / 28
File Manager
1. Click the Main Apps button “ ” in the Home page to enter the “APPS” menu interface (Fig. 2),
2. Click the “Explorer” icon in the “APPS” menu interface (Fig. 2) and enter “Explorer” menu (Fig. 3),
3. Click options in the “Explorer” menu to read the files from different devices.
Fig. 1 Fig. 2 Fig. 3
Local Settings
1. Click the Main Apps button “ ” in the Home page to enter the “APPS” menu interface (Fig. 1)
2. Click the “Settings” icon in the “APPS” menu interface (Fig. 2) and enter “Wi-Fi” menu (Fig. 3),
3. Click options in the “Wi-Fi” menu and set up different options.
Fig. 1 Fig. 2 Fig. 3

12 / 28
Description of Settings Interface (shown on the right)
Icon Function
Network & internet
Connected devices
Apps & notifications
Display
Sound
Storage
Privacy
Location
Security
Accounts
Accessibility
Screenshot
Memory
System
About table
Status of Menu Bar
1. Click the “setting”(Fig. 1),
2. Click the “Display”(Fig. 2),
3. Open the drop-down box for advanced options (Fig. 3),
4. The display interface of the hidden menu bar is shown in Figure 4,
5. Click the button on the right to open the display navigation (Fig. 5).
Fig. 1 Fig. 2 Fig. 3

13 / 28
Fig. 4Fig. 5
Screen Rotate
1. Click the Main Apps button “ ” in the Home page to enter the “APPS” menu interface (Fig. 1)
2. Click “System assistant” into Fig. 2
3. Choose the degree you would like to Rotate screen(Fig. 3), then click “CONFIRM”, after the restart, the
screen will be rotated (Fig. 4)
Fig. 1 Fig. 2 Fig. 3

14 / 28
Fig. 4
Choose System Language:
1. Get into “System”(Fig. 1), then click “Language & input” (Fig. 2)
2. Click “Languages”, then click “Add a language” (Fig. 3)
3. You can add the required system language (Fig. 4)
4. Drag the system language you just added up to the front(Fig. 5)
Fig. 1 Fig. 2 Fig. 3

15 / 28
Fig. 4Fig. 5
Factory Reset:
1. Get into Settings, then click “System” (Fig. 1),
2. Open the drop-down box for advanced options (Fig. 2),
3. Click “Reset options” (Fig. 3),
4. Click “Erase all data (factory reset)” (Fig. 4),
5. Click “Erase all data”(Fig. 5).
Fig. 1 Fig. 2 Fig. 3

16 / 28
Fig. 4Fig. 5
DiViEx APP Introduction
System requirements:
Step 1: Before using this application, make sure your machine meets or exceeds the following system
requirements:
CPU RK3568
ROM 32GB
Operating system Android 11
How to upload media files :
Step 2: Make new directory named “MediaFolder” in root directory in U disk.
Open "MediaFolder", create 3 subfolders, and change their names to "Images", "Videos", "Music".
Copy the media file to be displayed, image to "Images", video to "Videos", Music to "Music"

17 / 28
Format requirement:
Image JPG/JPEG/BMP/PNG
Video MPEG1/MPEG2/MPEG4/ MKV
Music
MP3
Step 3: Plug in the USB drive into the device and click the DiViEx App to open it.
Step 4: When the screen shows “Copy finished” after “Usb Disk: ”,

18 / 28
Setting:
Step 1: Select the time you would like each picture to be on the screen for by dragging the bar to the desired
time. Select how you would like the images to display. Select the desired transition effect between pictures.
Auto Boot
If enable, application will auto boot when android system boot
Auto Play
If enable, application will show all resource including images, videos
Choose Picture display mode
"Adapt", "Center", "Reshaped by the original size", "Set Image center adaptation display"
Set Picture switch mode
During the image conversion process, there are 10 animations: "Normal”, ”Depth”, “Zoom”, ” CubeIn”,
“Foreground To Background”, “Flip3D”, “Filp Horizontal”, “Rotate Down”, “Accordion, Stack".
Edit picture:
This function show all pictures, you can edit all pictures, and remove it.
Edit picture (Crop)
There are four corners and four border to crop the picture, you can drag it
Text
You can add text to the picture
Filter
Set different filter for the picture, we support the following filter: NOE, AUTO_FIX, BRIGHTNESS,
CONTRAST, DOCUMENTARY, DUE_TONE, FILL_LIGHT, FISH_EYE, GRAIN, GRAY_SCALE, LOMISH,
NEGATIVE, POSTERIZE, SATURATE, SEPIA, SHARPEN, TEMPERATURE, TINT, VIGNETTE, CROSS_PROCESS,
BLACK_WHITE, FLIP_HORIZONTAL, FILP_VERTICAL, PSTERIZE, ROTATE.

19 / 28
Sticker
You can add seven special effects to the picture

20 / 28
Frame
You can add different borders to the picture
Reset
Restore the original image
Picture sharing “ ”
When you click the share button, you can share the picture to the corresponding APP
Pictures saving “ ”
When you click the Save button, it will create a new picture
111