Displays2go CLB11172SB User manual

CLB11172SB Assembly Instruction
# Description QTY
1. Light Box 1
2. Front Cap 4
3. Back Wall-Mount Cap 4
4. Threaded Rod 4
5. Screws 4
6. Wall Anchors4
1. Remove the components from box
1
2
2
Parts List 3
1
4
6
5
2. Using front panel of light box(1), mark 4 holes to be drilled. Note: Can hang in portrait or landscape. 3. Drill 4 holes. fit anchors (6) into holes. Place screw (5)
through back wall mount cap(3) and screw into wall anchor.
Lightbox can be mounted in
portrait or landscape
3

5. To install pictures, slide between acrylic plates into inner frame. Use finger hole on back
acrylic plate to guide picture. Can also remove picture by sliding out of acrylic plates.
6. Connect AC adaptor to extending back of light box.Plug
adaptor into wall outlet.
4
5
6
Use finger hole in back
to guide picture into place
Slide graphic between
acryllic plates
4. First, screw 4 threaded rods(4) into the 4 back wall mount caps(3). Then place light panel holes
throught threaded rods. To secure light panel, screw 4 front caps(2) onto the threaded rods.
CLB11172SB Assembly Instruction