Displays2go AS3WALLFG User manual

Assembly Instructions
MODULAR FABRIC ARCH WALLS
SKU: AS3WALLFG (3 Arch Shaped Walls, Frame Only)
SKU: AS3WFSSCP (3 Arch Shaped Walls, Single-sided Custom Graphics)
SKU: AS3WFSDCP (3 Arch Shaped Walls, Double-sided Custom Graphics)
Scan the QR code to
visit the product page.

PARTS LIST
PART
A.
Soft Travel Bag .......................................................................................................................................1
B. Stabilizing Bar .......................................................................................................................................3
C.
Middle Poles ..........................................................................................................................................6
D.
Lower Poles ...........................................................................................................................................6
E. Arch Poles ..............................................................................................................................................6
F.
Foot .......................................................................................................................................................6
G. Fabric Banner (Optional Accessory)..................................................................................................3
No tools required for assembly.
NOTE: The 90” Arch has slightly longer poles than the 70” Arches. Before assembly, sort poles
using numbered stickers, making sure there are 2 sets of poles for the 70” Arches (2A-2E) and
one set for the 90” Arch (1A-1E).
A B C E F
G
D
If you have any questions regarding our products, please visit us at www.displays2go.com
or contact Displays2go customer service at 844-221-3388.
TOTAL QUANTITY

ASSEMBLY
Step 1. Poles are labeled with stickers for easy assembly. Identify parts needed for 1 arch wall.
Step 2. Lay out poles on a flat and level ground as shown below.
Step 3. Press down the push button on 1 pole and insert into the joining pole. Connect all parts
and make sure the frame is secure.
Step 4. Assemble the remaining arch walls the same way.
E
E
D
D
C
A
A
C
B
INSTALL FABRIC BANNERS
Pull fabric banner over the top of the arch and pull down to the floor. Adjust fabric as necessary,
then zip bottom to secure in place.
NOTE: Fabric banners not included with base package (AS3WALLFG - Frame Only).
Connect to complete
assembly