Displays2go WHBMG2840 User manual
AssemblyAssembly
InstructionsInstructions
SKU: WHBMG2840SKU: WHBMG2840
MOBILEMOBILE
WHITEBOARDWHITEBOARD
2
PARTS LIST
PART QUANTITY
A: Whiteboard ..................................................................................................... 1
B: Bottom Support Rod........................................................................................ 1
C: Top Support Rod ............................................................................................. 1
D: Clip...................................................................................................................1
E: Tray ................................................................................................................... 1
F: Circular Base....................................................................................................1
G: Bolt...................................................................................................................1
H: Short Bolt .........................................................................................................1
K: Allen Wrench...................................................................................................1
L: Bracket ..............................................................................................................1
M: Washer............................................................................................................1
N: Wrench............................................................................................................1
O: Caster..............................................................................................................5
Tools Required: Phillips Screwdriver
If you have any questions regarding our products, please visit us at www.displays2go.com
or contact Displays2go customer service at 844-221-3388.
Scan QR code
to visit product
page
3
If you have any questions regarding our products, please visit us at www.displays2go.com
or contact Displays2go customer service at 844-221-3388.
1. Using provided wrench, tighten all
five casters onto the circular base.
2. Slide top support rod into the bottom
rod and use knob to tighten.
Then, slide the entire support rod into
the circular base. Attach with bracket
and bolt (G), as shown.
3. Line back of whiteboard up with the
small mounting plate on the top of the
support rod and press down to slide
into place.
Then, attach the clip to the top of the
whiteboard, using bolt (H) and the
washer, as shown.
4. Press-fit the tray onto the bottom left
corner of the whiteboard.
Eny r wEny r w
wh r!wh r!
Scan QR code to visit
product page
Table of contents
Other Displays2go Whiteboard manuals
