Setting up your TV Service
Place your Set-Top Box near your TV.
Connect the HDMI cable to your Set-
Top Box, then connect to an HDMI port
on your TV. (Note name of port you use.)
Connect an ethernet cable to the LAN
port on your Set-Top Box, then connect
the other end to a LAN port on your
internet modem.
If you use a router, connect it to a LAN
port on your router instead.
Attach the power cord to the Set-Top Box
and connect to a nearby electrical outlet.
Select ‘INPUT’ or ‘SOURCE’ on your TV
and ensure it matches the port selected
in Step 1.
123
Before you begin:
>Additional Resources
You can find additional
self-help resources at
distributel.ca/support
>Review the contents of your install kit:
●Set-Top Box and power cord
●HDMI cable
●Remote control and 2 batteries
●2 ethernet cables
●2 Power Line Connectors
>Read through instructions
●Select the best set up option based on
location of your TV and modem.
●Ensure you follow the steps in order shown.
●Locate the necessary outlets in your home.
Follow these steps if your TV is NEAR your modem.
If your TV is not near your modem, follow steps on reverse side of this guide.
For tips on how to use theincluded PVR, remote control, electronic program guide,setting up parental controls and other helpful info,
check out the Support page of our website atdistributel.ca.
TV Out
Ant In A/V Out HDMI Audio Network +12V
After about 5 minutes, the Distributel
Guide will be displayed on your TV.
entone
SanDisk
Entone 450
TV Set-Top Box Set Up Guide
After following these three easy steps, you can now press ‘menu’ on the remote and begin enjoying your TV service.
Distributel_Entone 450 TV Set-Top_Set Up Guide accordian fold.indd 2-4Distributel_Entone 450 TV Set-Top_Set Up Guide accordian fold.indd 2-4 2020-07-30 12:03 PM2020-07-30 12:03 PM
