Ditel Kosmos series User manual

JUNI OR-LCC
JUNI OR20-LCC
C
ODE
: 3072
7169
EDI
TION
:
06
-
10
-
200
6
DIGITAL PANEL INSTR UMENT
FOR USE WITH LOAD CELL
JUNI OR-LCC
JUNI OR20-LCC
C
ODE
: 3072
7169
EDI
TION
:
06
-
10
-
200
6
DIGITAL PANEL INSTRUMENT
FOR USE WITH LOAD CELL

INTRODUCTION TO THE KOSMOS SERIES
2
This manual does not constitute a formal agreement.
All information given in this manual is subject to
change without notice.
The KOSMOS SERIES brings a new philosophy in digital panel
instrumentation, which is expressed by multipurpose,
modular - concept devices providing a rich array of basic
functions and advanced capabilities.
With a fully MODULAR DESIGN, it is possible to implement a
wi de variety of applications by only adding the adequate
options.
Intelligence within allows the meter to recognize the options
installed and ask for the necessary parameters to properly
function within desired margins. The basic instrument without
output o ptions omits these data in the program routines.
The instrument CALIBRATION is realized at the factory
eliminating the need for adjustment potentiometers.
Any circuit or option liable to be adjusted incorporates a
memory where calibration parameters are s tored, making it
possible the optional cards be totally interchangeable without
need of any subsequent adjust.
Valid for panel meters #2 32857 and so on
Custom CONFIGURATION for specific applications can be
made quickly and easily through five front panel keys,
following structured choice menus aided by display prompts
at each programming step.
Other features of the KOSMOS family include:
CONNECTIONS via plug-
in terminal blocks without
screws and CLEMP - WAGO clips cable retention system.
DIMENSIONS
Models ALPHA & BETA 96 x 48 x 120 mm DIN 43700
Models MICRA & JR/JR20 96 x 48 x 60 mm DIN 43700
CASE MATERIAL UL - 94 V0 - rated polycarbonate.
PANEL INSTALLATION by means of single part fingertip
without screws.
To guarantee the meter s technical specifications, it is
advised to check calibration parameters at periodical
intervals according to the ISO9001 standards for the
particular application operating criteria.
Recalibration of the meter s hould be made at the factory or
in a qualified laboratory.
2
INTRODUCTION TO THE KOSMOS SERIES
This manual does not constitute a formal agreement.
All information given in this manual is subject to
change without notice.
The KOSMOS SERIES brings a new philosophy in digital panel
instrumentation, which is expressed by multipurpose,
modular - concept devices providing a rich array of basic
functions and advanced capabilities.
With a fully MODULAR DESIGN, it is possible to implement a
wide variety of applications by only adding the adequate
options.
Intelligence withi
n allows the meter to recognize the options
installed and ask for the necessary parameters to properly
function within desired margins. The basic instrument without
output options omits these data in the program routines.
The instrument CALIBRATION is rea lized at the factory
eliminating the need for adjustment potentiometers.
Any circuit or option liable to be adjusted incorporates a
memory where calibration parameters are stored, making it
possible the optional cards be totally interchangeable without
nee d of any subsequent adjust.
Valid for panel meters # 232857 and so on
Custom CONFIGURATION for specific applications can be
made quickly and easily through five front panel keys,
following structured choice menus aided by display prompts
at each programming step.
Other features of the KOSMOS family include:
CONNECTIONS via plug-in terminal blo
cks without
screws and CLEMP - WAGO clips cable retention system.
DIMENSIONS
Models ALPHA & BETA 96 x 48 x 120 mm DIN 43700
Models MICRA & JR/JR20 96 x 48 x 60 mm DIN 43700
CASE MATERIAL UL - 94 V0 - rated polycarbonate.
PANEL INSTALLATION by means of single
part fingertip
without screws.
To guarantee the meter s technical specifications, it is
advis ed to check calibration parameters at periodical
intervals according to the ISO9001 standards for the
particular application operating criteria.
Recalibration of the meter should be made at the factory or
in a qualified laboratory.

DIGITAL PANEL INSTRUMENT JUNIOR FAMILY
JUNI OR-LCC & JUNI OR20-LCC
DIGITAL PANEL INSTRUMENT JUNIOR FAMILY
JUNI OR-LCC & JUNI OR20-LCC
3
INDEX
1. MODELS JR/ JR20 - LCC OVERVIEW ................................................................................................................................ 4-5
1.1. FRONT - PANEL DESCRIPTION ................................................................................................................... 6-7
2. SET - UP AND OPERATION ................................................................................................................................................ 8
2.1 - POWER SUPPLY AND CONNECTORS ........................................................................................................ 9- 10
2.2 - PROGRAMMING INSTRUCTIONS ................................................................................................................. 11
2.3 - INSTRUMENT SET - UP ................................................................................................................................ 12
2.4 - INPUT CONNECTION 13
2.5 - INPUT CONFIGURATION and LOCK TARE KEY ........................................................................................ 14 - 15
2.6 - DISPLAY CONFIGURATION .................................................................................................................... 16 - 18
2.7 - SETPOINTS CONFIGURATION ............................................................................................................... 19 - 21
2.8 - PROGRAMMING LOCKOUT .......................................................................................................................... 22
3. SETPOI NTS OPTION ...................................................................................................................................................... 23
4. TECHNICAL SPECIFICATIONS ......................................................................................................................................... 24
4.1 - DIMENSIONS AND MOUNTING ................................................................................................................... 25
5. WARRANTY ................................................................................................................................................................... 26
6. DECLARATION OF CONFORMITY .................................................................................................................................... 27
3
INDEX
1. MODELS JR/ JR20 - LCC OVERVIEW ................................................................................................................................ 4-5
1.1. FRONT - PANEL DESCRIPTION .................................................................................................................. 6-7
2. SET - UP AND OPERATION ............................................................................................................................................... 8
2.1 - POWER SUPPLY AND CONNECTORS ......................................................................................................... 9- 10
2.2 - PROGRAMMING INSTRUCTIONS ................................................................................................................. 11
2.3 - INSTRUMENT SET - UP ................................................................................................................................ . 12
2.4 - INPUT CONNECTION 13
2.5 - INPUT CONFIGURATION and LOCK TARE KEY ......................................................................................... 14 - 15
2.6 - DISPLAY CONFIGURATION .................................................................................................................... 16 - 18
2.7 - SETPOINTS CONFIGURATION ................................................................................................................ 19 - 21
2.8 - PROGRAMMING LOCKOUT .......................................................................................................................... 22
3. SETPOINTS OPTION ....................................................................................................................................................... 23
4. TECHNICAL SPECIFICATIONS ......................................................................................................................................... 24
4.1 - DIMENSIONS AND MOUNTING .................................................................................................................... 25
5. WARRANTY .................................................................................................................................................................... 26
6. DECLARATION OF CONF ORMITY ..................................................................................................................................... 27

4
MAIN
BOARD
CASE WITH PANEL
FIXING CLIPS
FRONT COVER
2RE OUTPUT OPTION
DISPLAY AND KEYBOARD
MODULE
4
MAIN
BOARD
CASE WITH PANEL
FIXING CLIPS
FRONT COVER
2RE OUTPUT OPTION
DISPLAY AND KEYB OARD
MODULE

5
This manual describes th e models Junior - LCC and Junior20 -
LCC both instruments are small format.
The difference between both models is the size of the digits of
the display. Model JR20 - LCC provides 20 mm - high digits which
make it easy readable at long distances. In this manual bo th
models are referred with the generic name of JR/ JR20 - LCC.
The models JR/ JR20 - LCC are ideals for direct connection to
one Load Cell and indication in engineering units. Totally
software configurable, allows choosing INPUT level signal (30 ó
300 mV), e xcitation voltage for one Load Cell (5/10 V DC) and
two programming ways for scaling the instrument, one by key
board and the other by Teach method that allows using real
field signals.
The basic instrument is a soldered assembly composed of the
main board, and the display and keyboard module.
Optionally, it can be equipped with a 2 - relay control output
card (2RE). This option provides an output c onnector at the
rear of the meter; status LEDs visible from the front and
specific programming routines, which are enabled
automatically once the card is installed.
The outputs are isolated from signal input and power supply.
1. MODELS JUNIOR - LCC and JUNIOR20 - LCC
This instrument conforms the following community standards: 89/336/CEE and 73/23/CEE
WARNING: Refer to the instructions manual to preserve safety protections.
5
This manual describes the models Junior - LCC and Junior20 -
LCC both instruments are small format.
The difference between both models is the size of the digits of
the display. Model JR20 - LCC provides 20 mm - high digits which
make it easy readable at long distances. In this manual both
models are referred with the generic name of JR/ JR20 - LCC.
The models JR/ JR20 - LCC are ideals for direct connection to
one Load Cell and indication in engin eering units. Totally
software configurable, allows choosing INPUT level signal (30 ó
300 mV), excitation voltage for one Load Cell (5/10 V DC) and
two programming ways for scaling the instrument, one by key
board and the other by Teach method that allows using real
field signals.
The basic instrument is a soldered assembly composed of the
main board, and the display and keyboard module.
Optionall y, it can be equipped with a 2 - relay control output
card (2RE). This option provides an output connector at the
rear of the meter; status LEDs visible from the front and
specific programming routines, which are enabled
automatically once the card is insta lled.
The outputs are isolated from signal input and power supply.
1. MODELS JUNIOR - LCC and JUNIOR20 - LCC
This instrument conforms the following community standards: 89/33 6/CEE and 73/23/CEE
WARNING: Refer to the instructions manual to preserve safety protections.