DIVERSIFIED WOODCRAFTS Shain MC-1 User manual

MC-1 WALL CABINET
ASSEMBLY INSTRUCTIONS

TABLE OF CONTENTS
REVISIONS TABLE………………………………………………………………………………………………………………….…………………..……….…………..……….…………………………………...………..…3
ASSEMBLY COMPONENTS……………………………………………………………………………………….…………………..……….……….……………...…………………………………………3
WALL MOUNTING____________________________________________________4

ASSEMBLY COMPONENTS
ITEMS INCLUDED
PART #
PART #
ASSEMBLY INSTRUCTIONS
1-HARDWARE BOX
REV DESCRIPTION DATE INITIAL
---
Original Created
5-21-09
NAM

Install Instructions for
Wall Cabinets
Items not included but needed for assembly:
1. Screws, depending on material cabinets hang from.
2. Drill
Instructions:
1. Put 1 screw in each corner. (make sure cabinet is hung level).
4 SCREWS
Note: picture
shown without
back installed

2. Additional screw for top and bottom in middle if cabinet is over 36” wide.
3. Screw through the fastening cleat located on top and bottom of the unit; the
fastening cleat is down 3” from the inside of the top and up 3” from inside of
the bottom. (Otherwise you would only be screwing through the .25” back
material.)
BACK VIEW
Additional
screws
Fastening cleats