dji C8000 User manual

C8000 Intelligent Battery
Station
User Guide
使用说明
使用說明
ユーザーガイド
사용자 가이드

Panduan Pengguna
คู่มือการใช้งาน
Hướng dẫn sửdụng
Handbuch
Guía de usuario
Οδηγός χρήσης
Guide d’utilisateur
Felhasználói útmutató
Guia do Usuário
Руководство пользователя
Kullanım Kılavuzu
Посібник користувача
v1.0

©2023 DJI All Rights Reserved. 1
User Guide 2
使用说明 10
使用說明 17
JP
VI
KR
KM
MS
TH
EN
ES
FR
HU
PT-BR
CHS
CHT
DE
EL
RU
TR
UK
사용자 가이드 31
38
Panduan Pengguna 45
คู่มือการใช้งาน 53
Hướng dẫn sử dụng 61
Guía de usuario 78
Οδηγός χρήσης 87
Guide d’utilisateur 97
ユーザーガイド 23
Handbuch 69
Felhasználói útmutató 106
Guia do Usuário 115
Руководство пользователя 124
Kullanım Kılavuzu 133
Посібник користувача 141
Compliance Information 150
Contents

2 ©2023 DJI All Rights Reserved.
EN
Disclaimer
Congratulations on purchasing your new DJITM product. Read this entire document and all safe
and lawful practices DJI provided carefully before use. Failure to read and follow instructions
and warnings may result in serious injury to yourself or others, damage to your DJI product, or
damage to other objects in the vicinity. By using this product, you hereby signify that you have
read this document carefully and that you understand and agree to abide by all terms and
conditions of this document and all relevant documents of this product. You agree to only use
this product for purposes that are proper. You agree that you are solely responsible for your
own conduct while using this product, and for any consequences thereof. DJI accepts no liability
for damage, injury, or any legal responsibility incurred directly or indirectly from the use of this
product.
DJI is a trademark of SZ DJI TECHNOLOGY CO., LTD. (abbreviated as “DJI”) and its affiliated
companies. Names of products, brands, etc., appearing in this document are trademarks
or registered trademarks of their respective owner companies. This product and document
are copyrighted by DJI with all rights reserved. No part of this product or document shall be
reproduced in any form without the prior written consent or authorization of DJI.
This document and all other collateral documents are subject to change at the sole discretion of DJI.
For up to date product information, visit http://www.dji.com and click on the product page for this
product.
This document is available in various languages. In the event of divergence among different
versions, the English version shall prevail.
Warning
1. The power cable of the AC input current is 16 A. Use two separate power outlets of a total
current exceeding 32 A. A certain power margin is required for safety.
2. DO NOT connect two AC power cables simultaneously when using the battery station
indoors.
3. This product serves for charging aircraft that are used for certain purposes. Before using such
aircraft, make sure you understand and comply with the local laws and regulations and, if
required, have obtained corresponding approval and clearance from the related government
agencies.
4. DO NOT use this product under direct sunlight, in rain, or in a damp environment.
5. Keep the battery station away from heat, pressure, water, flammable gases, and corrosives.
6. The battery station should be kept in an environment with a temperature range of -20° to 45°C
(-4° to 113°F).
7. Place the battery station on a flat and stable surface. In order to prevent fire hazards, make
sure the device is properly insulated and that there is sufficient space for ventilation (at least
50 cm).
8. In case of fire, make sure to use a dry powder fire extinguisher. A liquid fire extinguisher
may lead to an electrical hazard.
9. DO NOT unplug the AC cable or charging cable while the battery station is in use. Remove
batteries after charging is complete.
10.If there is any noticeable buildup, wipe the battery station or power ports with a clean, dry
cloth.

©2023 DJI All Rights Reserved. 3
EN
11.DO NOT use the battery station during a thunderstorm.
12.Refer to the document of the batteries for more safety instructions before use.
13.DO NOT hold the charging cables to carry the battery station. Otherwise, the cables may be
damaged.
14.DO NOT use the battery station in an area where batteries are stored. There should be a
distance of at least 30 cm between the battery station and any charging batteries. Otherwise,
the battery station or charging batteries may be damaged by excessive heating and may
even lead to a fire hazard.
15.Keep the battery station away from inflammable materials while charging. DO NOT place the
battery station or charging batteries on a blanket or any carpeted surfaces when in use.
16. For activation or firmware updates, the battery station can be connected to the DJI ASSISTANTTM 2
(MG Series) / (Delivery Drones Series) or the remote controller. Make sure the remote controller
firmware and the DJI Assistant 2 software have been updated to the latest version before use.
Introduction
The C8000 Intelligent Battery Station can connect with up to two batteries. While charging, the
battery station monitors the status of the batteries and can automatically adjust the charging
current if required. The battery station continues to charge even if the ventilation holes are
blocked.
Users can check the battery charging status LEDs and the warning indicator on the operation
panel of the battery station to confirm if there are any errors. The battery station can be
connected to a remote controller using a USB-C cable and users can launch the app compatible
with the aircraft to check more detailed information regarding any errors. Additionally, the
battery station has the following functions: overcurrent protection, overcharging protection,
under-voltage protection, overheating protection, and status display.

4 ©2023 DJI All Rights Reserved.
EN
8
10
9
7
7. USB-C Port (for device activation and
firmware updates)
8. AC Power Port
9. AC Power Dustproof Cover
10.GND Port (with a diameter of 4 mm)
Use the cable as shown below to connect
the GND port and the ground.
1
3
4
2
6
5
1. Operation Panel
2. Charging Cables Clamp
3. Front Panel Dustproof Cover
4. Charging Cables Storage
5. Handle
6. Charging Cable
3.8 mm
4.6 mm
14 AWG
1. Charging Status LED × 2
Each LED indicates the charging status
of the battery connected to a charging
cable. The numbers (1-2) correspond to
the position of the charging cable on the
battery station.
2. Warning Indicator
The warning indicator will be on if the battery
station detects any abnormalities. If the
indicator turns solid yellow, connect the
battery station to a remote controller using a
USB-C cable to confirm if there are any errors.
If the indicator turns solid red, stop charging
immediately. Only start to charge again once
the indicator is no longer solid red.
3. Power Button
Press to power the battery station on
and off. It is recommended to press the
power button and unplug the AC power
cable to power off the station.
Operation Panel
23
1
Overview
Battery Station
(not included)

©2023 DJI All Rights Reserved. 5
EN
Activation
The battery station requires activation before using for the first time. If the warning indicator
is solid green, it means the battery station has not been activated. Follow the steps below to
activate the battery station:
Method 1: Using the App
1. Connect the battery station to a power outlet.
2. Connect the battery station to the USB-A port on the remote controller using a USB-C cable.
3. Press the power button to power on the battery station.
4. Run the app compatible with the aircraft and follow the prompts to finish activation.
Method 2: Using DJI Assistant 2 (MG Series) / (Delivery Drones Series)
1. Connect the battery station to a power outlet.
2. Connect the battery station to the computer using a USB-C cable.
3. Visit www.dji.com to download DJI Assistant 2 (MG Series) / (Delivery Drones Series). Install
and run the software.
4. Press the power button to power on the battery station.
5. Use your DJI account to log in and click the corresponding charging device and follow the
prompts to finish activation.
Using the Battery Station
Up to two batteries can be connected to the battery station. Follow the instructions below to
use the battery station.
1. Connect the battery station to a power outlet.
Each AC power cable must be connected to a separate AC power outlet or power strip
with a rated current of more than 16 A.
Only use one AC power cable when using the battery station indoors. This will reduce
the maximum power output by half.
Users can set the max charging power limit in DJI Assistant 2 according to their
requirements to avoid safety risks such as short circuits due to excessive power.
Make sure the computer or remote controller is connected to the internet during activation.
Internet
> 16 A
> 16 A

6 ©2023 DJI All Rights Reserved.
EN
Make sure to place the charging battery on the same side that the charging cable is
fixed to the battery station.
2. Connect the battery to the battery station.
2
1
3. Make sure all cables are correctly connected and press the power button on the operation
panel of the battery station. The two LEDs and the warning indicator will flash simultaneously.
After powering on, the only lights remaining will be the charging status LEDs, which represent
the batteries currently connected. This indicates that self-diagnosis is complete and the
device is working normally. For more information about how to check if there are any errors
during self-diagnosis, refer to the LEDs and Warning Indicator Description. Alternatively,
connect the battery station to a remote controller and launch the app for more detailed
information about the errors.
4. If no errors are detected during self-diagnosis, the battery station will begin to charge the
batteries.
Using DB2000 Intelligent Flight Batteries: if two batteries are connected simultaneously, the
battery station will charge the battery with less power first. When the two batteries show
the same power, the battery station will charge the batteries simultaneously.
Using other batteries: if two batteries are connected simultaneously, the battery station will
charge the batteries in order of their power level, starting from highest to lowest.
Before use, make sure there are no obvious defects on the battery station or batteries
(e.g., jams, breakages, or short circuits).
DO NOT power the battery station on unless the batteries are correctly connected.
When using DB2000 Intelligent Flight Batteries, the battery station will warm
up a battery to 22° C (72° F) before charging if the battery station detects a low-
temperature battery. When using other batteries, the battery station will automatically
adjust the charging current based on the condition of the batteries. For example, if
the battery temperature is below 15°C (59°F), the charging current will be limited and
the charging time will be longer. The charging time depends on the battery model and
battery temperature. The lower the battery temperature, the longer the charging time
will be. The charging temperature range varies depending on the battery model. Refer
to the document of the battery to check the charging temperature range.

©2023 DJI All Rights Reserved. 7
EN
LEDs and Warning Indicator Description
During charging, the status LED will blink when the corresponding charging battery is
experiencing an abnormality due to the cable being disconnected, a high or low temperature,
overvoltage, or overcurrent. Once charging is complete, the status LED will be solid green. The
battery can be disconnected from the battery station.
Battery Station Status:
LEDs Warning Indicator Power Button
Indicator Description
/ Solid green / The battery station is ready to be activated, or
under loader stage
Solid
yellow Solid yellow Solid green Self-diagnosis and power supply of the battery station are normal
/ / Solid green The battery station is ready to connect to a battery
Solid
yellow
Blinks yellow twice
continuously /
The battery station logs are being exported and
it has stopped charging. Restart the battery
station after the logs have been exported
Charging Indicators:
LED Blinking
Pattern Warning Sound Description
Solid yellow / The battery corresponding to the number is connected
and queued to charge
Blinks green / The battery corresponding to the number is charging
Solid green / The battery corresponding to the number is fully charged
Blinks yellow once
continuously /The battery corresponding to the number is warming up
Blinks yellow three
times continuously /
The temperature of the battery corresponding to the
number is too low and the battery station has stopped
charging
Blinks yellow four
times continuously /
The temperature of the battery corresponding to the
number is too high and the battery station has stopped
charging
Blinks red once
continuously
Beeps once
continuously
The battery in the corresponding position is not
correctly connected or an unauthorized battery is
connected. This warning will only appear 10 seconds
after the battery is connected
Blinks red twice
continuously
Beeps twice
continuously
The connector short-circuited. Check the battery or the
battery station
Solid red Beeps three times
continuously Critical error detected
The warning indicator will light up if one of the following problems occur while using the battery
station:
Warning Indicator Warning Sound Description
Solid yellow / Main board is abnormal and the power is limited
Blinks yellow once
continuously /The CPX503-3000 switching power supply is abnormal and the power is limited
Blinks red once
continuously /The CPX503-3000 switching power supply is unavailable or the fan stalled

8 ©2023 DJI All Rights Reserved.
EN
Blinks red once
continuously
Beeps once
continuously
The CPX503-3000 has experienced a critical error and
there is no output
Solid red Beeps twice
continuously Main board is abnormal and unavailable
If there are any abnormalities, connect the battery station to a remote controller and run the
app compatible with the aircraft to check more information. If the app indicates that a module
is abnormal or broken, contact DJI or a DJI authorized dealer.
Updating Firmware
Follow the instructions below to update the firmware using the remote controller or DJI
Assistant 2 (MG Series) / (Delivery Drones Series). Users will be notified through the app when
firmware updates are available.
Using Remote Controller
1. Connect the battery station to a remote controller using a USB-C cable and connect the
battery station to a power outlet.
2. Power on the remote controller and press the power button on the operation panel to power
on the battery station.
3. Run the app compatible with the aircraft and follow the prompts to update the firmware.
Make sure the remote controller remains connected to the internet while updating.
Using DJI Assistant 2 (MG Series) / (Delivery Drones Series)
1. Download DJI Assistant 2 (MG Series) / (Delivery Drones Series) at
https://www.dji.com/downloads.
2. Launch the software and log in with your DJI account.
3. Power on the battery station and connect the station to a computer via the USB-C port.
4. Select the corresponding charging device and click on Firmware Updates on the left panel.
5. Select the firmware version that you wish to update to.
6. Wait for the firmware to download. The firmware update will start automatically.
7. The station will reboot automatically after the firmware update is complete.
Before using the battery station, make sure there are no obvious defects on the ports
or cables of the battery station (e.g., jams, breakages, or short circuits).
DO NOT connect the batteries while updating the firmware of the battery station.
DO NOT disconnect the battery station while updating the firmware of the battery
station.
Make sure the computer is connected to the internet.
Retry if update fails.

©2023 DJI All Rights Reserved. 9
EN
Storage and Maintenance
Battery Station Storage
When the battery station is not in use, disconnect the batteries from the battery station and
the battery station from the power outlet. Follow the steps below to safely secure the charging
cables.
1. After disconnecting a battery, wrap the charging cable over the battery station.
2. Make sure the end of the charging cable is securely attached to the corresponding storage on
the side of the battery station.
DO NOT store this product under direct sunlight, in rain, or in a damp environment.
Keep the battery station away from heat, pressure, water, flammable gases, and
corrosives.
2
1
Battery Station Maintenance
Clean the AC power dustproof cover and front dustpoof cover regularly to ensure the charging
performance is unaffected.
Specifications
Model CHX101-7000
Operating Temperature Range -20° to 45° C (-4° to 113° F)
Dimensions 300×280×230 mm
Output Channel 2
Input 1 100-120 V, 50/60 Hz, 15 A
220-240 V, 50/60 Hz, 15 A
Input 2 100-120 V, 50/60 Hz, 15 A
220-240 V, 50/60 Hz, 15 A
Battery Station Output 59.92 V, 100 A (with an input voltage of 220-240 V)
59.92 V, 40 A (with an input voltage of 100-120 V)
Compatible Battery DB2000/DB1560/DB800/T40/T20P/T30 Intelligent Flight Battery
Weight Approx. 11.5 kg

10 © 2023 大疆创新 版权所有
CHS
免责声明
感谢您购买大疆 TM 创 新（ DJITM）产品。使用本产品之前，请仔细阅读并遵循本文及大疆创新（DJI）
提供的所有安全与合规操作指引，否则可能会给您和周围的人带来伤害，损坏本产品或其它周
围物品。一旦使用本产品，即视为您已经仔细阅读本文档，理解、认可和接受本文档及本产品
所有相关文档的全部条款和内容。您承诺仅出于正当目的使用本产品。您承诺对使用本产品以
及可能带来的后果负全部责任。大疆创新（DJI）对于直接或间接使用本产品而造成的损坏、伤
害以及任何法律责任不予负责。
DJI 是深圳市大疆创新科技有限公司及其关联公司的商标。本文出现的产品名称、品牌等，均为
其所属公司的商标或注册商标。本产品及手册为大疆创新版权所有。未经许可，不得以任何形
式复制翻印。
本文档及本产品所有相关的文档最终解释权归大疆创新（DJI）所有。如有更新，恕不另行通知。
请访问 www.dji.com 官方网站以获取最新的产品信息。
注意事项
1. 充电管家 AC 电源线为 16 A。为保证安全用电，务必确保充电管家外接的交流电源总电流 ≥32 A，
且需留有一定余量。
2. 在室内使用充电管家时，禁止双路 AC 电源线同时接入使用。
3. 本产品用于专业电气设备无人飞机。在使用前，用户需持有培训合格证书，如《慧飞无人机应用
技术培训中心学员合格证书》、《UTC 无人驾驶航空器系统操作手合格证》。
4. 请勿在阳光直射、雨淋或潮湿的环境中使用本产品。
5. 本产品应远离热源、高压、水、可燃性气体、腐蚀剂等危险物品。
6. 务必于合适的环境温度使用充电管家（建议 -20 至45℃）。
7. 产品需放置在水平台面，不能倾斜歪倒，四周务必留有足够通风距离（建议 > 50 cm），保障产品
工作时通风良好。
8. 若遇火警，请正确使用干粉灭火器进行灭火，使用液体类灭火器可能会有触电危险。
9. 请勿在充电过程中拔出 AC 电源线或电池充电线。充电完成后，请及时拔出电池。
10. 若部件内部或电池接口附有异物，请使用干燥的毛巾进行擦拭，擦拭时确保充电管家未接入外部
电源。
11. 严禁在雷电及雷雨天气中使用产品。
12. 使用充电管家对电池进行充电前，请仔细阅读电池的相关安全说明及使用注意，并严格按照里面
的内容进行操作。
13. 移动或搬运充电管家时，不要拉扯电池充电线。
14. 请选择开阔场地进行充电，务必远离电池存储区域。为保证充电安全，充电时，电池与充电管家、
电池与电池之间的距离需大于 30 cm，以免因为发热集中而导致的充电管家或电池故障，甚至造
成火灾等严重后果。
15. 充电时，请远离可燃物，切勿将充电管家或电池放置于地毯上进行充电。
16. 充电管家可通过遥控器或 DJI ASSISTANTTM 2（MG 系列）/（运载系列）调参软件激活和升级固件。
使用前确保已将遥控器固件或调参软件升级至最新版本。
简介
C8000 智能充电管家（以下简称“充电管家”）可连接 2块电池进行充电。充电过程中，可实
现与电池的通信，并根据当前电池可接受的电流大小智能调整充电电流。充电管家具备自我修

© 2023 大疆创新 版权所有 11
CHS
复功能，即使在充电过程中发生散热孔堵塞等非致命性问题时也能自动调整充电电流，确保充
电持续进行。
充电管家具备自检功能，用户可通过控制面板上的警告灯及 LED 灯提示，对充电管家的异常情
况进行初步诊断，并可通过 USB 连接线连接充电管家至遥控器，运行与飞行器配套使用的 App
了解详细的异常情况说明。此外，充电管家还具有过流保护、过充保护、过 /欠压保护、过温
保护及状态指示等功能。
部件名称
充电管家
1
3
4
2
8
6
5
10
9
7
1. 控制面板
2. 电池充电线固定卡口
3. 前面板防尘网
4. 充电线连接头固定位
5. 提手
6. 电池充电线
7. USB-C 接口
8. 交流电源接口
9. 交流电源防尘网
10. 地线接口
使用下图所示规格的接地
线连接地线接口与大地。
控制面板
23
1
3.8 mm
4.6 mm
14 AWG
1. 电池充电状态 LED 灯×2
每个 LED 灯对应指示插入充电接口位置的电池的充电状态。
（需自备）

12 © 2023 大疆创新 版权所有
CHS
激活时，请确保电脑或遥控器可以接入互联网。
Internet
≥16 A
≥16 A
使用充电管家
充电管家最多可连接 2块电池，请参照如下步骤使用本产品。
1. 将充电管家连接至交流电源。
每根 AC 电源线需分别连接至额定电流 ≥16 A 的AC 电源插座或排插上。
若在室内使用充电管家，仅可接入一根 AC 电源线，此时最大输出功率减半。
用户可以在 DJI Assistant 2 调参软件中设置最大充电功率限制，以防止出现短路等安全隐患。
2. 警告灯
当出现充电异常时，警告灯将会亮起。若警告灯为黄色，请通过 USB-C 连接线连接充电管家至
遥控器，查看异常警示信息。若警告灯为红色，请停止充电，确保排除异常后才可再次充电 。
3. 启动 / 停止
按下以打开或关闭充电管家。关闭充电管家时，建议先按下启动 /停止按键，再拔出 AC 电源线。
激活充电管家
首次使用的充电管家需要激活。当警告灯为绿灯常亮时，表示该充电管家尚未激活，请按照以
下步骤对充电管家进行激活。
方法一：使用 App 激活：
1. 将充电管家连接至交流电源。
2. 使用 USB-C 连接线连接充电管家至遥控器的 USB-A 接口。
3. 打开充电管家电源开关。
4. 运行与飞行器配套使用的 App，并根据 App 提示激活充电管家。
方法二：使用 DJI Assistant 2（MG 系列）/（运载系列）激活：
1. 将充电管家连接至交流电源。
2. 使用 USB-C 连接线连接充电管家至电脑。
3. 前往 https://www.dji.com/downloads 下载并安装调参软件，然后运行。
4. 打开充电管家电源开关。
5. 使用 DJI 账号登陆，点击相应设备图标，然后根据提示激活充电管家。

© 2023 大疆创新 版权所有 13
CHS
2. 将充电线连接头插入电池。
2
1
为达到良好的充电体验，请将充电线从固定位取下，绕回至另一侧连接电池。
3. 确认所有线已正确连接，按下控制面板的“启动 / 停止”按钮，此时充电管家控制面板 2 个电池充
电状态 LED 灯、警告灯将会被同步点亮，再同步熄灭，然后已插入相应电池的 LED 灯将会呈黄灯
常亮。此时，充电管家完成自检，且已正常启动。如自检过程出现异常，请查阅 LED 灯及警告灯描
述章节了解异常原因，或连接至遥控器后打开 App 获取详细的异常情况描述。
4. 充电管家自检正常后将对电池进行充电。
使用 DB2000 智能飞行电池：若同时连接 2块电池，充电管家将首先为低电量的电池充电，2块
电池电量一致后再同时充电。
使用其他电池：若同时连接 2块电池，充电管家将会按照电池剩余电量，由高到低依次进行充电。
连接充电管家前，请确保充电管家的各个端口、输入线束无堵塞、破损、断线、短路等明显缺陷。
充电前，请检查待充电池，确保各个端口及线束没有破损、断线等明显缺陷。
务必连接好电池后再启动充电管家。
使用 DB2000 智能飞行电池时，充电管家若检测到电池温度过低，将首先将电池加热至
22℃，然后再进行充电。使用其他电池时，充电管家会根据电池的性能调整充电电流。例如，
一般情况下当温度低于 15℃时，充电电流将被限制，电池充电时间延长。电池充电时间与
电池型号和温度相关，温度越低，电池的充电时间越长。不同的电池低温以及高温禁止充电
温度不同，具体的电池可充电温度范围请查看电池的相关文档。
LED 灯及警告灯描述
充电过程中，当其中某块电池异常时（如断线、高温、低温、过压、过流），相应编号的 LED 灯将会
提示。充电完成后，LED 灯将会呈绿灯常亮，此时请断开充电管家和电池的连接。
充电管家状态：
LED 灯 警告灯 电源按键灯 说明
/绿灯常亮 /充电管家等待激活，或处于启动（Loader）阶段。
黄灯常亮 黄灯常亮 绿灯常亮 充电管家自检正常，且供电正常。
/ / 绿灯常亮 等待连接电池。
黄灯常亮 黄灯连续双闪 /充电管家正在导出日志，不可充电。导出完毕后，
请重启充电管家。

14 © 2023 大疆创新 版权所有
CHS
充电过程提示：
LED 灯闪烁规则 提示音 说明
黄灯常亮 /相应编号插口已插入电池，等待充电。
绿灯闪烁 /相应编号电池正在充电。
绿灯常亮 /相应编号电池已完成充电。
黄灯连续单闪 /相应编号电池正在加热。
黄灯连续闪三次 /相应编号电池温度过低，充电已被禁止。
黄灯连续闪四次 /相应编号电池温度过高，充电已被禁止。
红灯连续单闪 D.D.D…电池未插好或电池非官方电池（检测到电池插入
后10 秒左右提示）。
红灯连续双闪 DD.DD.DD… 接口短路，请检查电池和充电管家。
红灯常亮 DDD.DDD… 检测到不可恢复异常。
使用时，若充电管家自身出现异常，警告灯将会进行提示：
警告灯 提示音 说明
黄灯常亮 /充电管家主板异常，功率限制。
黄灯连续单闪 / CPX503-3000 开关电源模块异常，功率限制。
红灯连续单闪 /CPX503-3000开关电源模块不可用或风扇堵转。
红灯连续单闪 D.D.D…CPX503-3000 开关电源模块严重异常，无输出。
红灯常亮 DD.DD.DD… 充电管家主板异常，不可用。
当出现异常情况时，可将充电管家通过 USB-C 口连接至遥控器，并运行与飞行器配套使用的
App 查看详细的异常说明及建议。当遥控器提示模块异常或损坏时，建议用户联系 DJI 或DJI
授权的代理商维修或更换故障模块。
固件升级
若充电管家需要更新，DJI 官网将发布固件升级通知，请留意产品下载页面。请按照以下方式，
使用遥控器或 DJI Assistant 2（MG 系列）/（运载系列）调参软件对充电管家进行升级。
使用遥控器升级
1. 使用 USB-C 连接线将充电管家连接至飞行器遥控器，并使用 AC 电源线连接充电管家至交流电源。
2. 开启遥控器，并按下充电管家上的“启动 / 停止”按键打开充电管家。
3. 运行与飞行器配套使用的 App，并根据提示进行固件下载升级。固件下载过程中需要连接互联网。

© 2023 大疆创新 版权所有 15
CHS
使用 DJI Assistant 2（MG 系列）/（运载系列）升级
1. 通过以下地址下载 DJI Assistant 2（MG 系列）/（运载系列）调参软件：
https://www.dji.com/downloads
2. 启动调参软件，使用 DJI 账号登录并进入主界面。
3. 开启充电管家，并在 20 秒内连接充电管家的 USB-C 接口与电脑。
4. 在调参软件界面点击相应设备图标，然后点击固件升级按钮。
5. 选择并确认需要升级的固件版本。
6. 调参软件将自行下载并升级固件。
7. 升级完成后，断开充电管家与电脑的连接，手动重启充电管家即可。
连接充电管家前，请确保充电管家的各个端口、输入线束无堵塞、破损、断线、短路等明显缺陷。
充电管家升级过程中，严禁接插电池。
在线升级过程中，请勿断开设备间的连接。
确保整个升级过程中个人电脑能够访问互联网。
升级过程中出现失败提示时，请尝试重新升级。
存储和保养
存储充电管家
充电完成或不使用充电管家时，请断开电池充电线与电池的连接，并断开 AC 电源线，然后按照
下图所示将电池充电线固定至连接头固定位，起保护作用。
1. 将电池充电线绕回至另一侧位置。
2. 确保线材上部卡在图示中的位置，然后将电池充电线连接头卡入其固定位进行固定。
请勿将充电管家存储至阳光直射、雨淋或潮湿的环境中。
充电管家应远离热源、高压、水、可燃性气体、腐蚀剂等危险物品存储。
2
1

16 © 2023 大疆创新 版权所有
CHS
保养充电管家
请定期清扫交流电源防尘网和前面板防尘网，以保证充电效果。
规格参数
型号 CHX101-7000
工作环境温度 -20℃至 45℃
尺寸 300×280×230 mm
输出通道 2
输入 1100-120 V, 50/60 Hz, 15 A
220-240 V, 50/60 Hz, 15 A
输入 2100-120 V, 50/60 Hz, 15 A
220-240 V, 50/60 Hz, 15 A
充电管家输出 59.92 V, 100 A（220-240 V 输入时）
59.92 V, 40 A（100-120 V 输入时）
适配电池 DB2000/DB1560/DB800/T40/T20P/T30 智能飞行电池
重量 约 11.5 kg

CHT
©2023 DJI All Rights Reserved. 17
免責聲明
感謝您購買大疆 TM 創新 (DJITM）產品。使用本産品之前，請仔細閱讀並遵循本文及大疆創新（DJI）提供的所
有安全與法規遵循操作指南，否則可能會為您和周圍的人帶來傷害，損壞本産品或其它周圍物品。一旦使用
本産品，即視為您已經仔細閱讀本文件，理解、認可和接受本文件及本産品所有相關文件的全部條款和內容。
您承諾僅出於正當目的使用本產品。您承諾對使用本產品及其可能帶來的後果負全部責任。大疆創新（DJI）
對於直接或間接使用本產品而造成的損壞、傷害及其任何法律責任概不負責。
DJI 是深圳市大疆創新科技有限公司及其附屬公司的商標。本文出現的産品名稱、品牌等，均為其所屬公司的
商標或註冊商標。本產品及手冊之版權為大疆創新所有。未經許可，不得以任何形式複製翻印。
本文件及本產品所有相關文件的最終解釋權歸大疆創新（DJI）所有。如有更新，恕不另行通知。請前往
www.dji.com 官方網站以取得最新的產品資訊。
注意事項
1. 充電管家 AC 電源線為 16 A。為保證安全用電，務必確保充電管家外接的交流電源總電流大於 32 A，且
需留有一定餘量。
2. 若在室內使用充電管家，禁止雙路 AC 電源線同時接入使用。
3. 本產品用於專業電氣裝置無人機。部分國家和地區可能要求使用者獲取相應使用許可，使用前敬請了解詳
情並遵守當地法例。
4. 請勿在陽光直射、雨淋或潮濕的環境中使用本產品。
5. 本產品應遠離熱源、高壓、水、可燃性氣體、腐蝕劑等危險物品。
6. 務必於適合的環境溫度使用充電管家（建議 -20 至45℃）。
7. 產品需放置在水平檯面，不能傾斜歪倒，四周務必留有足夠通風距離（建議 > 50 cm），保障產品運作時
通風良好。
8. 若遇火警，請正確使用乾粉滅火器進行滅火，使用液體類滅火器可能會有觸電危險。
9. 請勿在充電過程中拔出 AC 電源線或電池充電線。充電完成後，請及時拔出電池。
10. 若零件內部或電池連接埠附有異物，請使用乾燥的毛巾進行擦拭，擦拭時確保充電管家未接入外部電源。
11. 嚴禁在雷電及雷雨天氣中使用產品。
12. 使用充電管家對電池進行充電前，請仔細閱讀電池的相關安全說明及使用注意，並嚴格按照裡面的內容進
行操作。
13. 移動或搬運充電管家時，不要拉扯電池充電線。
14. 請選擇開闊場地進行充電，務必遠離電池存放區域。為保證充電安全，充電時，電池與充電管家、電池與
電池之間的距離需大於 30 cm，以免因為發熱集中而導致充電管家或電池故障，甚至造成火災等嚴重後果。
15. 充電時，請遠離可燃物，切勿將充電管家或電池放置於地毯上進行充電。
16. 充電管家可透過遙控器或 DJI ASSISTANTTM 2 (MG Series) / (Delivery Drones Series) 調整軟體啟動和升
級韌體。使用前確保已將遙控器固件或調整軟體升級至最新版本。
簡介
C8000 智能充電管家（以下簡稱「充電管家」）可連接 2 顆電池進行充電。充電過程中，充電管家可執行與
電池的通訊，並根據目前電池可接受的電流大小智能調整充電電流。充電管家具備全新的自我修復功能，即
使在充電過程中發生散熱孔堵塞等非致命性問題時也能自動調整充電電流，確保充電持續進行。
充電管家具備自動檢測功能，使用者可透過控制面板上的警告燈及 LED 燈提示，對充電管家的異常情況進行
初步診斷，並可透過 USB 連接線連接充電管家至遙控器，執行與飛行器配套使用的 App 應用程式，了解詳細
的異常情況說明。此外，充電管家還具有電流過大保護、過度充電保護、電壓不足保護、過熱保護及狀態指
示等功能。

CHT
18 ©2023 DJI All Rights Reserved.
1
3
4
2
8
6
5
10
9
7
1. 控制面板
2. 電池充電線固定接環
3. 前面板防塵網
4. 充電線連接頭固定位
5. 把手
6. 電池充電線
7. USB-C 連接埠（用於產品啟動及固件
升級）
8. 交流電源連接埠
9. 交流電源防塵網
10.地線連接埠（直徑 4 mm）
使用下圖所示規格的接地線連接地線
連接埠與大地。
控制面板
23
1
零組件名稱
充電管家
1. 電池充電狀態 LED 燈×2
每個 LED 燈對應指示插入充電連接埠位置的電池充電狀態。
2. 警告燈
當出現充電異常時，警告燈將會亮起。若警告燈為黃色，請透過 USB-C 連接線連接充電管家至遙控器，
查看異常警示訊息。若警告燈為紅色，請停止充電，確保排除異常後才可再次充電。
3. 啟動 / 停止
按下以打開或關閉充電管家。關閉充電管家時，建議先按下啟動 /停止按鈕，再拔出 AC 電源線。
3.8 mm
4.6 mm
14 AWG （需自備）

CHT
©2023 DJI All Rights Reserved. 19
啟動充電管家
首次使用的充電管家需要啟動。當警告燈為綠燈恆亮時，表示該充電管家尚未啟動，請按照以下步驟對充電
管家進行啟動。
方法一：使用應用程式啟動：
1. 將充電管家連接至交流電源。
2. 使用 USB-C 連接線連接充電管家至遙控器的 USB-A 連接埠。
3. 打開充電管家電源開關。
4. 執行應用程式，並根據應用程式提示啟動充電管家。
方法二：使用 DJI Assistant 2 (MG Series) / (Delivery Drones Series) 啟動：
1. 將充電管家連接至交流電源。
2. 使用 USB-C 連接線連接充電管家至電腦。
3. 前往 https://www.dji.com/downloads 下載並安裝調整軟體，然後執行。
4. 打開充電管家電源開關。
5. 使用 DJI 帳號登入，點擊相應裝置圖示，然後根據提示啟動充電管家。
> 16 A
> 16 A
使用充電管家
充電管家最多可連接 2 顆電池，請參照如下步驟使用本產品。
1. 將充電管家連接至交流電源。
每條 AC 電源線須分別連接至額定電流大於 16 A 的AC 電源插座或排插上。
若在室內使用充電管家，僅可接入一條 AC 電源線，此時最大輸出功率減半。
使用者可以在 DJI Assistant 2 調整軟體中設定最大充電功率限制，以防止出現短路等安全隱患。
啟動時，請確保電腦或遙控器可以連接網際網路。
網際網路