DKN Ultimate XC-150 Product guide

Safety Instructions
Before you start training on your exerciser, please read the instructions carefully. Be sure to keep the
instructions for information, in case of repair and for spare part delivery.
•This exerciser is made for home use or semi commercial use only, and tested up to a max.body weight
of 150 kg.
•Follow the steps of the assembly instructions carefully.
•Use only original parts as delivered.
•Before the assembly, be sure to check if delivery is complete by using the included parts-list.
•For assembly use only suitable tools and ask for assistance with assembly if necessary.
•Place the exerciser on an even, non-slippery surface. Because of possible corrosion, the usage of any
exerciser in moist areas is not recommended.
•Check before the first training and every 1-2 months that all connecting elements are tight fitting and are in the
correct condition.
•Replace defective components immediately and/or keep the equipment out of use until repair.
•For repairs, use only original spare parts.
•In case of repair please ask your dealer for advice
•Avoid the use of aggressive detergents when cleaning.
•Ensure that training starts only after correct assembly and inspection.
•For all adjustable parts be aware of the maximum positions to which they can be adjusted/tightened to.
•This exerciser is designed for adults. Please ensure that children use the exerciser only under the supervision
of an adult.
•Ensure that those present are aware of possible hazards, e. g. movable parts during training.
•Warning: incorrect/excessive training can cause health injuries.
•Please follow the advice for correct training as detailed in training instructions.
Consult your physician before starting with any exercise programme. He can advise on the kind of
training and which impact is suitable.
•The owner’s manual is only for customers’ reference.
•The supplier can not guarantee for mistakes occurring due to translation or change in technical specification of
the product.
All data displayed are approximate guidance and cannot be used in any medical application.

Check List

Assembly Step. 1

Assembly Step. 2

Assembly Step. 3

Assembly Step. 4 and Step. 5

Assembly Step.6 and Step. 7

Assembly Step. 8

Assembly Step. 9

Assembly Step. 10

Assembly Step. 11

Final Assembly

Part List
NO. DESCRIPTION Q'TY NO. DESCRIPTION Q'TY
1 BASE FRAME 1 36 #8*16MM SCREW 4
2 UPRIGHT TUBE 1 37 M8*18MM SCREW 8
3 FIX HANDLEBAR （L）1 38 M8*25MM SCREW 2
4 FIX HANDLEBAR （R）1 39 M8*15mm ALLEN HEAD SCREW 14
5 UPPER SWIVEL HANDLE BAR (L) 1 40 M8*25mm ALLEN HEAD SCREW 4
6 UPPER SWIVEL HANDLE BAR (R) 1 41 M8*20mm ALLEN HEAD SCREW 10
7 LOWER SWIVEL HANDLE BAR (L) 1 42 M8*56mm ALLEN HEAD SCREW 2
8 LOWER SWIVEL HANDLE BAR (R) 1 43 M8*118mm ALLEN HEAD SCREW 4
9 PEDAL TUBE (L) 1 44 M8*15mm HEX HEAD BOLT 2
10 PEDAL TUBE ( R ) 1 45 M8*52MM HEX HEAD BOLT 1
11 OUTER PEDAL POST ( L ) 1 46 M6*18MM HEX HEAD BOLT 4
12 OUTER PEDAL POST ( R ) 1 47 M8*25MM HEX HEAD BOLT 1
13 FRONT FOOT 1 48 M8 CURVE WASHER 6
14 MIDDLE FOOT 1 49 M10*24*0.3T NYLON WASHER 2
15 CROSS BAR OF RAIL 1 50 M5*16*1.5 WASHER 8
16 RAIL 2 51 M8*16*1.2 WASHER 2
17 CROSS FRAME 2 52 M8*16*1.2 WASHER 28
18 MAGNETIC HOLDER BRACKET 1 53 M8*22*1.5T WASHER 1
19 JOCKEY WHEEL BRACKET 1 54 M8*28*2.0T WASHER 2
20 AXLE FOR PULLEY 1 55 M8*38 *2.0TWASHER 4
21 AXLE SUPPORT 1 56 M10*21*2.0T WASHER 2
22 MAGNETIC HOLDER 1 57 M10*22*1.5T WASHER 4
23 WASHER FOR PEDAL 2 58 M5 SPRING WASHER 8
24 ADJUST FEET BRACKET 4 59 M6 SPRING WASHER 4
25 AXLE FOR ROLLER 2 60 M8 SPRING WASHER 2
26 FLYWHEEL 1 61 M8 SPRING WASHER 40
27 FLYWHEEL AXLE 1 62 M10 SPRING WASHER 4
28 PEDAL TUBE SHAFT 2 63 NYLOC NUT M6 5
29 M5*20mm SCREW 8 64 NYLOC NUT M8 2
30 M5*10mm SCREW 8 65 3/8"*9T WH NUT 2
31 M6*10MM SCREW 4 66 3/8"*7T WH NUT 2
32 M3*10MM SCREW 1 67 TURNING PLATF COVER 2
33 M4*20MM SCREW 1 68 TURNING PEDAL 2
34 M5*12MM SCREW 9 69 ROUND END CAP FOR22.2TUBE 2
35 M5*50MM SCREW 4 70 PLUG AXLE SUPPORT 6

NO. DESCRIPTION Q'TY NO. DESCRIPTION Q'TY
72 PLUG AXLE SUPPORT∮30 4 101 FOAM GRIPS FOR FIX HANDLEBAR 2
73 BUSHING 8 102 END CAP FOR HANDLEBAR 2
74 FOOT COVER 4 103 SPRING-BIG 1
75 ROUND END CAP FOR42TUBE 2 104 SPRING 1
76 ROLLER 2 105 WIRE ROD 1
77 MOVING WHEEL 2 106 BELT 1
78 BEARING <6001ZB> 6 107 CONSOLE 1
79 BEARING <6004ZZ> 2 107- 1 M5*12MM PHILIPS HEAD SCREW 4
80 BEARING <6203ZB> 2 108 SENSOR WIRE 1
81 CLIP C12 2 109 DC WIRE 1
82 CLIP C17 1 110 HAND PULSE SENSOR 2
83 CLIP C20 2 111 HAND PULSE WIRE 2
84 ADJSUT FEET 4 112 UPPER COMPUTER CABLE 1
85 ROUND SCREW FOR ADJ HEIGH 2 113 LOWER COMPUTER CABLE 1
86 PULLEY 1 114 MOTOR 1
87 SENSOR BRACKET 1 115 ADAPTOR 1
88 MAGNET 1 116 M8*65mm HEX HEAD BOLT 1
89 FRONT CAP FOR CHAIN COVER (L) 1 117 M6 NUT 1
90 FRONT CAP FOR CHAIN COVER (R) 1 118 M6 WASHER 1
91 FRONT SLEEVE 1 119 M6 WASHER 1
92 HEAD TUBE MIDDLE COVER 2 120 COVER 1
93 FRONT HANDLEBAR
COVER 1 121 TOOL 1 1
94 BACK HANDLEBAR COVER 1 122 TOOL 2 1
95 SWIVEL PIVOT COVER - FRONT 2 123 TOOL 3 1
96 SWIVEL PIVOT COVER - BACK 2 124 TOOL 4 1
97 SW PEDAL PIVOT COVER - L 2
98 SW PEDAL PIVOT COVER - R 2
99 PEDAL 2

Operating Instructions Computer
Switch on
After connecting the power adapter and/or after
pressing any button the display will be blinking for
some seconds showing the figure 78, then will enter
the calendar setting mode. Use up/down knob to
enter the year, confirm pushing the knob (ENTER).
Follow same procedure to enter month, day and
clock.
Next the display shows MANUAL, PROGRAM,
H.R.C.(age ),USER and WATT. Use UP/DOWN to
select the appropriate program. Press “ MODE” to
confirm selection.
Function buttons
MODE Press to select any function to be
displayed on the main screen.
ST/STOP To start or stop the exercise
program.
RECOVERY Press this button for recovery
function: After exercising, while the
LCD is still active, press recovery
button, and hold both sensors (or
wear the chest transmitter) The
computer will run a time down for 60
seconds, after which your recovery
rate will be displayed, grades 1 up to
6. Level 1 featuring fast recovery,
level 6 slow recovery.
RESET Press for 1 second to clear last single
entry or one single display.
TOTAL RESETTo clear the display and reset all
data. Press for 4 seconds to clear all
data, the display will show ‘78”.
UP To select upward function.
DOWN To select downward function
Function description
Time:
Displays time function by pressing the MODE button
(marking – flashes in “TIME” LCD window). For
countdown enter rate in minutes by turning the
up/down button.
Speed:
Displays speed function by turning the MODE button
(marking – flashes in “SPEED” LCD window).
Distance:
Displays distance function by pressing the MODE
button (marking – flashes in “DISTANCE” LCD
window). For countdown enter rate in km by turning
the up/down button.
Calories:
Displays calorieburn function by pressing the MODE
button (marking – flashes in “CALORIE” LCD
window). For countdown enter rate by turning the
up/down button.

Watt:
Displays power value function by pressing the MODE
button (marking – flashes in “WATT” LCD window.)
Pulse:
Hold firmly both sensors on the handgrip (please
wipe sensors and hands before starting measuring
your pulse) or apply optional chest strap (moisten
slightly the contacts of the strap). Your current heart
rate will be displayed within 30 seconds up to one
minute. A stable figure requires to hold both sensors
firmly.
Your computer is compatible with the optional
chest transmitter (ref 20073), for integrated
wireless heart rate registration.
Function value range
Functions Display Range Preset Range
Speed 0.0 - 99.9 km/h None
RPM 0.0 - 999 rpm None
Time 00.00 - 99.59 min 01.00 - 99.00 min
Distance 0.00 - 99.99 km 0.5 - 99.50 km
Watt 0 - 999 watts 10 - 350 watts
Calories 0 - 9999 cal 0 - 9999 cal
Pulse 30 - 240 bpm 30 - 240 bpm
Recovery F1 - F6 None
Training in MANUAL mode
•Select “MANUAL”, use “UP”and“DOWN” button
to adjust the load level (this ergometer offers 16
levels), confirm selection by pressing “MODE”.
•“TIME” flashes: use “UP”and“DOWN” button to
set exercise time, confirm selection by pressing
“ENTER”. If you donot intend setting exercise
time, simply press “ MODE”.
•“DISTANCE” flashes: use “UP”and“DOWN”
button to set distance, confirm selection by
pressing “MODE”. If you donot intend setting
exercise distance, simply press “MODE”.
•“CALORIES” flashes: use “UP”and“DOWN”
button to set calorie consumption, confirm
selection by pressing “MODE”. If you donot
intend setting calorie consumption, simply press
“MODE”.
•“PULSE” flashes: use “UP”and“DOWN” button to
set maximum heart rate, confirm selection by
pressing “MODE”. If you donot intend setting a
heart rate level, simply press “MODE”, the
monitor will display current heart rate value.
•Start exercising by pressing the “ST/STOP”
button.

Training in PROGRAM mode
•Select “PROGRAM”, use “UP”and“DOWN”
button to select profile 1 to 12, confirm selection
by pressing “MODE”.
•Press “MODE” again, and set target value for
‘TIME, DISTANCE, CALORIES AND PULSE”.
Follow the procedure as described above in
manual mode. In program mode “WATT” cannot
be preset.
•If you do not intend setting any target value, start
exercising by pressing the “ST/STOP” button.
Training in H.R.C Target mode
•Select “TARGET H.R.”, use “UP”and“DOWN”
button to enter your age.
•Press “MODE ”, “55%” is flashing. Use“UP”and
“DOWN” button to select 55, 75, 90 or THR.
Confirm your selection by pressing “MODE”.
•If you selected 55, 75 or 90%, “TIME” is flashing:
follow the procedure as described above in
manual mode for presetting target values.
•If you selected THR, “100” is flashing: use
“UP”and “DOWN” button to set target heart rate.
•Confirm your selection by pressing “MODE ”.
•Start exercising by pressing the “ST/STOP”
button.
•Upon entering rate in Bpm (Beats per minute) the
load tension will be controlled by current heart
rate. The resistance will be auto-adjusted
according to current heart rate figure. If your
heart rate figure is under the target pulse, the
tension will be up-adjusted one level every 30
seconds, up to the maximum level 16. As soon
as your heart rate figure has achieved the target
pulse, tension will be down adjusted one level
immediately. In case of over spec the level will be
down adjusted one level immediately, and keep
down-adjusting each 15 seconds until your heart
rate figure has achieved the target pulse.
Training in USER mode
•Select “USER”, use “UP” and “DOWN” button to
set up your own profile (this Ergometer offers 16
load levels and 16 load segments).
•In each segment confirm your load settings by
pressing “MODE”.
•Start exercising directly by pressing the
“ST/STOP” button, or if you intend to set
personal target values, press the “ST/STOP”
button once again. “P” and “TIME” are flashing.
Follow the procedure as described above in
manual mode for presetting target values.
•Start exercising by pressing the “ST/STOP”
button.
Training in WATT mode
•Select “WATT”, use “UP” and “DOWN” to set
target watts (programmable between 10 up to
360 Watt), confirm selection by pressing
“MODE”.
•The tension difficulty will be auto-adjusted
according to the Watt figure. If the figure is under
the target value, the tension difficulty will be up-
adjusted one level every 30 seconds, up to the
maximum level 16. As soon as you achieved the
set value, tension difficulty will be down adjusted
one level immediately. In case of over spec the
level will be down adjusted one level
immediately, and keep down-adjusting each 15
seconds until you reach the preset value.
•If you do not intend setting Watts, simply press
“MODE”.

To reselect initial mode push “STOP” (LCD
shows “P” in top left). Press “RESET” and use
“UP” and “DOWN” button to select another
program mode.
Training Instructions
If you have not been physically active for a
long period of time and also to avoid health
risks you should consult your general
physician before starting to exercise.
To achieve a considerable improvement of your
physical resistance and your health, some
aspects of how to achieve the most efficient
training should be followed:
Intensity
To achieve maximum results the right intensity has to
be chosen. The heart rate is used as guideline.
As a rule of thumb the following formula is commonly
used:
Maximum pulse rate = 220 - Age
While exercising the pulse rate should always be
between 60% - 85% of the maximum pulse rate.
For your personal training rates please see the
attached pulse rate chart.
When starting to exercise you should keep your rate
at 70% of your maximum pulse rate in the first couple
of weeks.
With increasing improvement of fitness the pulse rate
should be slowly increased to 85% of your maximum
pulse rate.
This is a personal orientation value. Consult
your physician for professional advise before
adapting a heart rate recovery program.
Fat burning
The body starts to burn fat at approx. 65% of the
maximum pulse rate.
To reach an optimum at burning rate, it is advisable
to keep the pulse rate between 70% – 80% of the
maximum pulse rate.
The optimum training amount consists of
three workouts per week 30 minutes each.
Example:
You are 52 years of age and would like to start
exercising.
Maximum pulse rate = 220 - 52(age) = 168 pulse/min
Minimum pulse rate = 168 x 0.7 = 117 pulse/min
Highest pulse rate = 168 x 0.85 = 143 pulse/min
During the first weeks it is advisable to start with a
pulse rate of 117, afterwards increase it to 143.
With increasing improvement of fitness the training
Intensity should be increased to 70% - 85% of your
maximum pulse rate.
This can be done by increasing the pedalling
resistance, by using a higher pedalling frequency or
with longer training periods.
Training Organisation
Warm-up
Before every training session you should warm-up for
5-10 minutes.
Some stretching and pedalling with low pedalling
resistance will get you started.
Stretch or flexibility training is vital for a fit and
healthy physique. By training your body to become
more supple, you will improve circulation and help
keep your muscles mobile. The warming-up program
allows you to achieve a supple and well-toned form.
If you have not focused on stretch training before,
start with gentle stretches and increase the length or
time of the stretch as you become more flexible over
time.
Prior to exercise, make sure you warm up thoroughly
to protect against injury and prepare yourself for the
activity to come. Warm up for 8 to 10 minutes by
walking or jogging lightly on the spot or use a
treadmill, bike or elliptical strider. Try to include some
similar movements that make up your workout,
include stretches to target your tighter muscles. The
duration of the warm up activity will depend on the
intensity of your workout as well as your own fitness
level.
Work-out
During the actual training a rate of 70% -85% of the
maximum pulse rate should be chosen.
The time-length of your work out can be calculated
with the following rule of thumb:
daily work-out: approx. 10 min. per unit
2-3 x per week: approx. 30 min. per unit
1-2 x per week: approx. 60 min. per unit
Cool down
To introduce an effective cool-down of the muscles
and the metabolism the intensity should be drastically
decreased during the last 5 – 10 minutes.
Stretching is also helpful for the prevention of muscle
ache.

Success
Even after a short period of regular exercises you will
realise that you constantly have to increase the
pedalling resistance to reach your optimum pulse
rate.
The units will be continuously easier and you will feel
a lot fitter during your normal day.
For this achievement you should motivate yourself to
exercise regularly. Choose fixed hours for your work
out and do not start training too aggressively.
An old saying amongst sportsmen says:
“The most difficult thing about training is to start
it.”
Wishing you lots of fun and success with your
exerciser.
All data displayed are approximate guidance
and cannot be used in any medical
application.
Heart rate displayed is an approximate read-
out, and may not be used as guidance in any
cardio-vascular related medical or
paramedical program.