Hoist Fitness MC-7019 User manual

Fax
[phone]
[phone]
Customer Service
[phone]
RECORD SERIAL NUMBER HERE
MACHINE CODE
**WARNING!**
TO PREVENT POSSIBLE TIPPING, BOLT THIS UNIT TO THE
EXERCISE FLOOR. FAILURE TO DO SO MAY RESULT IN SERIOUS
INJURY OR DEATH.
Note: Both Serial Number and Model Number are Required when Ordering Parts
OWNER'S MANUAL
A01
MC-7019
PLATFORM STATION

02
04
07
08
09
11
12
14
ABBREVIATIONS...................................................................
OWNER'S MANUAL
PAGE 01 MC-7019 ASSEMBLY
LIMITED WARRANTY............................................................
INSTRUCTIONS .....................................................................
FRAME ASSEMBLY ..............................................................
PRE-ASSEMBLY....................................................................
DECAL PLACEMENT.............................................................
DECAL REFERENCE.............................................................
PART LIST...............................................................................
CONTENTS

OWNER'S MANUAL
PAGE 02MC-7019 ASSEMBLY
Ratchet Wrench
1/2", 9/16" and 3/4" Sockets
Adjustable Wrench
Rubber Mallet
Tape Measure
Level
Hex Key Wrench Set
Two People
TOOLS REQUIRED
Before beginning assembly please take the time to read instructions
thoroughly. Please use the various lists in this manual to make sure that
all parts have been included in your shipment. When ordering, use part
number and description from the lists. Use only HOIST replacement parts
when servicing. Failure to do so will void your warranty and could result
in personal injury.
HOIST equipment is designed to provide the smoothest, most effective
exercise motion possible. After assembly, you should check all functions to
ensure correct operation. If you experience problems, first recheck the
assembly instructions to locate any possible errors made during assembly.
If you are unable to correct the problem, call your authorized HOIST dealer.
Be sure to have your serial number and this manual when calling. When all
parts have been accounted for, continue on.
INSTRUCTIONS

OWNER'S MANUAL
PAGE 03 MC-7019 ASSEMBLY
***THIS PAGE WAS INTENTIONALLY LEFT BLANK***

OWNER'S MANUAL
PAGE 04
MC-7019 ASSEMBLY
FRAME ASSEMBLY

ASSEMBLY FOR
RIGHT HAND CONFIGRUATIONLEFT HAND CONFIGRUATION
ASSEMBLY FOR
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
* INCLUDED WITH MC-7012.
FRAME ASSEMBLY
NOTE:
- HAND TIGHTEN HARDWARE.
PAGE 05
OWNER'S MANUAL
MC-7019 ASSEMBLY
2
* * *
*
25
19
10
1
10
26
19
5
3
19
18
24
*
MC-7012
25
10
19
19
26
IMPORTANT:
THE TIE WITH VERTICAL BOLT HOLES (2)
MUST BE INSTALLED IN THIS LOCATION.
IT WILL BE USED FOR THE SHELF
INSTALLATION IN THE NEXT STEPS.
19
*
*
1
*
25
10
19
26
26
19 18 24 3
MC-7012
10
5
2
25
10
19
*
19
IMPORTANT:
THE TIE WITH VERTICAL BOLT HOLES (2)
MUST BE INSTALLED IN THIS LOCATION.
IT WILL BE USED FOR THE SHELF
INSTALLATION IN THE NEXT STEPS.

26
16
13
4
23
7
16
22
13
12
20
26
3
19
2
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- WRENCH TIGHTEN ALL PREVIOUSLY
HAND TIGHTENED HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
OWNER'S MANUAL
MC-7019 ASSEMBLY PAGE 06
*IMPORTANT*
NOW THAT THE MC-7019 IS COMPLETELY ASSEMBLED TAKE TIME TO
ASSURE THAT YOUR UNIT IS ASSEMBLED SQUARE AND LEVEL. IT MAYBE NECESSARY
TO LOOSEN SOME FRAME HARDWARE TO RE-ALIGN THE FRAME AND RETIGHTEN BOLTS.

PRE-ASSEMBLY
- WRENCH TIGHTEN HARDWARE.
REMOVED FOR CLARITY.
- SOME PARTS MAY HAVE BEEN
NOTE:
PAGE 07
OWNER'S MANUAL
MC-7019 ASSEMBLY
22
15
12
7
11
21
6
21
5
11
7
14
22
12
17

DECAL PLACEMENT
NOTE:
- ALL DECALS ARE CENTERED
UNLESS OTHERWISE STATED.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
OWNER'S MANUAL
MC-7019 ASSEMBLY PAGE 08
28
29
27
27

021-0003113
021-0003627
SERIAL # DECAL
DECAL REFERENCE
OWNER'S MANUAL
PAGE 09 MC-7019 ASSEMBLY