DKS 1216-080 User manual

1200Lb.MagneticGateLockKit DoorKing Part Numbers
1216-080
1216-081
It is essential that the surfaces of the armature and the magnetic lock seat perfectly to one another when the gate is in the closed
position. This allows the lock to achieve its maximum holding strength. It is critical the armature is securely fastened to the gate
frame, but able to move with the 1/8 to 1/4 inch rubber spacer(s) to correctly align with the magnetic lock.
Important: Weld the
brackets to fence post and
gate frame BEFORE
assembling the armature
and maglock.
Note: Additional hardware is
supplied for a side mount option
and different armature spacing
configurations.
DoorKing Optional Hardware Note: “L” and “Z” bracket kit
(P/N BO3-S12) is available for different installation configurations.
Sexnut Note: Using the sexnut,
the armature can be mounted
directly to the gate frame
without using the supplied
armature mounting bracket.
Secure sexnut through the gate
frame and into armature bolt.
120 Glasgow Avenue
Inglewood, California 90301 U.S.A.
Front Mount Typical
Maglock
Front Mount Typical
1” Welded Bracket Armature Bolt
1 1/2” Armature Bolt
Wiring
Access Plate
P/N B02-GL12
(Supplied)
P/N B01-GL12
(Supplied)
Plug unused
1/2” conduit
holes.
Maglock
Mounting
Bracket
Weld to fence post.
(Typical connection)
Side Mount Option
Side Mount Option
Installation
Armature
Bolt
Options
Maglock
TypicalFrontMountWelded
Moving Gate Frame
Armature
Gate Frame
Armature
Sexnut
Stationary Fence Post
Welded Mounting Brackets
Armature
Thinner
Option
Typical
Thicker
Option
Insert
Roll Pin
Insert
Roll Pin
Sexnut Connection
Option
(Not used for welded
bracket option.)
Armature
Mounting
Bracket
Weld to gate frame.
(Typical connection)
www.leedan.com [email protected] Toll-Free: 800-231-1414

Indoor
12 or 24 VDC Wire Run
16 AWG - 200 Ft
18 AWG - 100 Ft
Polarity Matters!
Use
Only
Indoor
Use
Only
1216-065-B-4-09 Copyright 2009 DoorKing, Inc. All rights reserved.
MOV Note: Install the supplied
MOV across the power supply
terminals to protect the magnetic
lock from transient voltage spikes.
DoorKing Part Numbers
1216-080
1216-081
Relay
120 Glasgow Avenue
Inglewood, California 90301 U.S.A.
Wirefor24VDCor12VDCONLY
24VDCTransformer
(Model 1812-035)
24VDC 12VDC
12VDCTransformer
(Model 1812-037)
Red - Normally Closed
Black - Common
Green - Normally Open
Black
Green
Red Positive
Positive
Negative
Negative
White
LED Lock Status Sensor
Relay Contacts
Rated 1 amp @ 30 Volt max.
(Model 1216-081 Only)
LED Lock Status Sensor
Relay Contacts
Rated 1 amp @ 30 Volt max.
(Model 1216-081 Only)
Access Control Device
or Gate Operator
(Normally Closed)
Access Control Device
or Gate Operator
(Normally Closed)
Relay
Red - Normally Closed
Black - Common
Green - Normally Open
Red
Black
White
Green
MOV
MOV
www.leedan.com [email protected] Toll-Free: 800-231-1414