600 Lb. Magnetic Gate Lock DoorKing Part Number
DKGL-S6-1
It is essential that the surfaces of the armature and the magnetic lock seat perfectly to one another when the gate is in the closed
position. This allows the lock to achieve its maximum holding strength. It is critical the armature is securely fastened to the gate
frame or door, but able to move with the rubber spacer to correctly align with the magnetic lock.
Mount the armature directly to
the gate frame or door. Secure
sexnut through the gate frame
or door into the armature bolt.
120 Glasgow Avenue
Inglewood, California 90301 U.S.A.
Maglock
Armature Bolt
Hexolt
Anti-Tamper
Plug
Optional
Spacer
Washers
Mount to a
stationary
fence post
or door jamb.
Mount to a
stationary
fence post
or door jamb.
Installation
Moving
Gate Frame
or Door
Stationary Fence Post
or Door Jamb
Armature
Maglock
Sexnut
Armature
Insert
Roll Pin
Sexnut
Note: Use spacer
washer(s) to shorten
the length of hexbolt
if necessary.
