DMA clinical pilates trapeze table User manual

trapeze table
assembly
care and cleaning of equipment
Thank you for purchasing the DMA Trapeze Table. Designed
for years of safe trouble free use they will need only some
basic care to ensure all parts continue to work smoothly.
Once / twice a month wipe vinyl with a soft sponge and a
spray bottle containing a mixture os 100ml of Eucalyptus oil
to 1 litre of water.
DO NOT use methylated spirits on vinyl top.
Make sure all rings on the frame are lined up straight and
check that swing bars are free of movement and rod end
is square.
contents
Trapeze board and strap
2 foot loops/ 2 footstraps
Safety chain
1 pull down bar
Upper & lower swing bars
Touch up spray
Springs
2 long soft silver springs 101
2 long gold springs 102
2 heavy gold springs 103
2 extra heavy gold springs 104
2 standard silver springs 105
warranty
Clinical Pilates P/L designed and manufactured
exercise equipment is guaranteed against defects in
workmanship and materials under normal use for 24
months. This includes ropes and springs.
If any part thereof proves to be defective within the
warranty period it will be repaired or replaced, free of
charge, and at the discretion of Clinical Pilates Pty.
Ltd. This includes parts and labour.
This warranty is extended to the original purchaser
from date of purchase.
• Damage to structural or other integral parts of
equipment due to negligence is not covered by
warranty, in such cases warranty coverage will
be subject to the manufacturers’ discretion.
• The warranty will be voided if the equipment has
been modified, altered or contains components
that are not part of the Clinical Pilates Pty
Ltd line.
The benefits conferred by this warranty are in
addition to all other rights and remedies which the
consumer has under the Trade Practices Act.
to obtain warranty service
Call Clinical Pilates P/L and fax / email your written
claim with details of the problem experienced,
Appropriate action will be taken as quickly
as possible.
1 Yarra Street, South Yarra VIC 3141 Australia
p61 3 9827 4511 / 61 3 9525 1566
e[email protected]
wwww.clinicalpilates.com

trapeze table assembly instructions
1. Lie base on side and slide poles through each corner.
2. Slide uprights onto poles with single loop at top.
3. Position top frame onto posts and tighten bolts lightly.
4. Stand table upright and slide main board into position
on base.
5. Ensure all loops are straight by twisting posts and /
or uprights.
6. Fit upper and lower swing bars with pivot bolts and
spacers as per diagram (A). Swing bars can be mounted
with both on one end if desired, Extra swing bars can
be ordered and fitted directly to frame.
NOTE : the same assembly procedures
apply for the compact trapeze.
mounting points
for extra swing bar
diagram A: Some adjustment of rod ends may be required
Note: Ensure that tapered end of spacer bush fits
to the ring on the frame or damage can occur.
for correct swing bar alignment.
washer