DMA reformer User manual

reformer
assembly
care and cleaning of equipment
Thank you for purchasing the DMA Clinical Reformer.
Designed for years of safe trouble free use they will need
only some basic care to ensure all parts continue to
work smoothly.
Over time dust and dirt may build up on tracks in affecting
the smoothness of the carriage running.
Once / twice a month wipe tracks and running wheels on
carriage with methylated spirits.
All wheel bearings are sealed, do not spray with lubricants.
DO NOT use methylated spirits on vinyl top, damp soapy
rag will clean best.
To ensure optimum operation of the footbar mechanism
keep bolts between frame and footbar firm (A).
Chrome locking bar and upright bolts (B) should be slightly
loose so that the locking mechanism locks reliably. A slight
spray of lubricant may help occasionally.
contents
Reformer Frame
Carriage
Shoulder Pads
5 Springs
Instruction Booklet
warranty
Clinical Pilates P/L designed and manufactured
exercise equipment is guaranteed against defects in
workmanship and materials under normal use for 24
months. This includes ropes and springs.
If any part thereof proves to be defective within the
warranty period it will be repaired or replaced, free of
charge, and at the discretion of Clinical Pilates Pty.
Ltd. This includes parts and labour.
This warranty is extended to the original purchaser
from date of purchase.
• Damage to structural or other integral parts of
equipment due to negligence is not covered by
warranty, in such cases warranty coverage will
be subject to the manufacturers’ discretion.
• The warranty will be voided if the equipment has
been modified, altered or contains components
that are not part of the Clinical Pilates Pty
Ltd line.
The benefits conferred by this warranty are in
addition to all other rights and remedies which the
consumer has under the Trade Practices Act.
to obtain warranty service
Call Clinical Pilates P/L and fax / email your written
claim with details of the problem experienced,
Appropriate action will be taken as quickly
as possible.
1 Yarra Street, South Yarra VIC 3141 Australia
p61 3 9827 4511 / 61 3 9525 1566
e[email protected]
wwww.clinicalpilates.com

reformer assembly instructions
1. Attach springs under carriage with light spring
(gold end) in centre, feed through webbing slings.
2. Insert shoulder pads into brackets, offset to outside.
3. Wipe tracks and wheels down thoroughly with damp rag
to remove any residue from packaging.
4. Place carriage on tracks and run to check for smooth
running. Wipe / check wheels if any bumps.
5. To attach ropes place foot loops around shoulder pads
feed through rear pulleys and forward through cleats. Drop
remainder through hole in carriage.
ropes
carriage
shoulder pads