CE-Conformity
This module is controlled by means of a microprocessor, and uses a high-
frequency (8MHz crystal).
The properties of the module within the CE bounds the module must be
installed in a closed metal cabinet.
Ensure that shielded cabling is used and that the shield is properly connected.
Risc issues
You have a technical product purchased. In accordance with the prior art can not be ruled out
following risks
Failure Risk: The device can always without warning partially or completely fail. Small loss
could be prevented by the redundant system to build.
Commissioning: The module must be connected according to the instructions and configured.
This work may only be performed by experienced personnel, which the documentation has
read and understood.
Operating: Changes or special operating states of connected systems, both hidden defects of
our own devices, can lead to failure
Abuse: Any improper use of the device may pose risks that can not be foreseen prohibited.
The deployment of the device where the safety of persons depends on the device is prohibited.
Environment:
Electronic and electrical equipment has to be disposed via a recycling center.
You can also in our any products returned to us, we will take care for proper
disposal.
Page 3 of 4 99-3375 DMX DC Motor controller