DNP Wireless Connect Module User manual

Quick Start Guide

1. Set up Your Hardware
• Make sure that your
DNP printer is powered
ON and
working (no error
lights).
• Connect your WCM to
your DNP printer using
the
USB printer cable.
• Power ON your WCM
by plugging in the
power adaptor.
• Wait 2 minutes for the
WCM to initialize and
get ready for use.
NOTE:
Make sure your printer is connected and
powered on BEFORE plugging in your WCM.
Printing from an iOS app
1. Connect your mobile device to the
WCM Wi-Fi network (as above).
2. Use any photo app to view your
image.
3. Press the Share button.
4. Scroll through the list and press Print.
5. Press Select Printer and choose the
printer name of your DNP printer.
6. Press Print.
Printing from an Android app
1. Connect your mobile device to the
WCM Wi-Fi network (as above).
2. Use any photo app to view your
image.
3. Select the Menu button.
4. Tap the Print button.
5. Select your printer by pressing the
printer name.
6. Press Paper Size and select the correct
photo print size.
7. Tap the Printer icon.
2.CongureyourWCM
YoumustcongureyourWCM
before it can used. You can
easilycongureandmanage
your WCM by accessing the
WCM management portal
using your mobile phone’s web
browser.
• Connect your mobile phone
to the WCM Wi-Fi network
using the Settings app on
your phone.
SSID: DNPWirelessConnect
Password: dnp12345
• From your web browser, open the
WCM management portal by typing in the address
bar: 192.168.4.1
• Enter your name and email address to register your
device(thiswillonlyhappenthersttime
that you connect to your WCM).
• Press the Add button to add a printer instance. Click
No when asked if you want to customize the printer
name. This will set up a printer instance using the
default print size and printer name.
Download the full User Guide at:
www.dnpphoto.com
PRINTING WITH YOUR WIRELESS CONNECT MODULE
SETTING UP YOUR WIRELESS CONNECT MODULE
Power
Adaptor
Alt. Power Cable
(QW410 only)
Printer
Cable

Wireless Photo Printing using DNP Printers
© 2020 DNP Imagingcomm America Corporation. All rights reserved.
iPad and AirPrint are registered trademarks of Apple Inc.
AirCastPro is a trademark of Allen Christopher Software.
PN: DOC-R-WCM Rev: 05-28-2020
The DNP Wireless Connect Module (WCM) is the easiest way to professionally print photos directly from mobile devices to the
most popular DNP photo printers. You get fast printing with great photo quality.
Print from iOS and Android devices – no app required
The WCM supports the Internet Printing Protocol, which
allows it to work with Apple AirPrint®and with the latest
Android devices (running Android 9 or later). For Android 8.1
or earlier, you need to use a 3rd party printing app such as
Let’s Print Droid or Mopria Print.
When you set up your WCM, you create a unique printer
name for each photo print size that you want to use (these
are called “printer instances”). For example, if you connect
your WCM to a DS620A printer that has 6x8 media loaded,
you might create 3 printer instances and name them
“DS620-4x6”, “DS620-6x6” and “DS620-6x8”.
When you connect your smart phone or tablet to the WCM
network, each printer name will be shown in the standard
iOS and Android print menus. Any app that supports the
print command will work with your printer instances. Just
select the printer with the print size you want.
Print from Windows PCs and Macs
Windows and Mac users can print wirelessly using standard
DNP printer drivers. You simply connect the WCM to your
network–either via a Wi-Fi network or using an Ethernet
cable–then set up your printer driver to use network printing.
Your WCM printer instances will appear as installation
options during setup.
Download the full
User Guide at:
www.dnpphoto.com