Doalltech Gateware FVS User manual

WokerWoker--Attandance Device of Construction SiteAttandance Device of Construction Site
RFID&BiometricsRFID&Biometrics
SystemSystem
GatewareGateware--FVSFVS
ver. ver. –– 1.01.0
User ManualUser Manual
RFID&BiometricsRFID&Biometrics
SystemSystem
GatewareGateware--FVSFVS
ver. ver. –– 1.01.0
User ManualUser Manual

GATEWARE-EM Doalltech
C
o
n
t
e
n
t
s
Contents
User Manual
lMatters that require attention
lProduct Explanation
1. Starting
l1. Check of the supply items
l2. Installation method
l3. Each part Name & Function of the Device
2. System setting
lExplanation of the Screen UI
lExplanation of the keypad control
lMenu Control - Enter
lMenu Control – Select the item
lMenu Control – Check the status
lMenu Control – Default setting
lMenu Control – Serial pot setting
lMenu Control – Relay setting
lMenu Control – Special setting
lLAN Setting
lUSB setting
lTime setting
lPassword setting
3. Reference
lExternal Interlocking device – Turn-Gate
lExternal Interlocking device – Items
lAdditional Function
lFAQ
lBefore A/S Request
lProduct Size
lFCC RF INTERFERENCE STATEMENT
lAdditional charge item
----------------- 3
----------------- 6
----------------- 7
----------------- 8
---- 9
---------------- 11
---------------- 12
---------------- 15
---------------- 16
---------------- 17
---------------- 18
---------------- 19
---------------- 20
---------------- 21
---------------- 22
---------------- 23
---------------- 24
---------------- 25
--------- 26
-------------- 27
---------------- 28
---------------- 30
---------------- 32
---------------- 38
-------------- 39
2
User Manual
lMatters that require attention
lProduct Explanation
1. Starting
l1. Check of the supply items
l2. Installation method
l3. Each part Name & Function of the Device
2. System setting
lExplanation of the Screen UI
lExplanation of the keypad control
lMenu Control - Enter
lMenu Control – Select the item
lMenu Control – Check the status
lMenu Control – Default setting
lMenu Control – Serial pot setting
lMenu Control – Relay setting
lMenu Control – Special setting
lLAN Setting
lUSB setting
lTime setting
lPassword setting
3. Reference
lExternal Interlocking device – Turn-Gate
lExternal Interlocking device – Items
lAdditional Function
lFAQ
lBefore A/S Request
lProduct Size
lFCC RF INTERFERENCE STATEMENT
lAdditional charge item
English
----------------- 3
----------------- 6
----------------- 7
----------------- 8
---- 9
---------------- 11
---------------- 12
---------------- 15
---------------- 16
---------------- 17
---------------- 18
---------------- 19
---------------- 20
---------------- 21
---------------- 22
---------------- 23
---------------- 24
---------------- 25
--------- 26
-------------- 27
---------------- 28
---------------- 30
---------------- 32
---------------- 38
-------------- 39

GATEWARE-EM Doalltech
Matters that require attention– Sign explanation, Power supply
W
a
r
n
I
n
g
&
C
a
u
t
I
o
n
ØSign explanation
vPlease read this manual and keep the using method because for prot
ecting risks or damages on property by using the product correctly.
lThis is composed of contents on the possibility of death or
serious wound in case of violating instructions.
lIf violate the instruction, you are vulnerable to wounds or
occurrence of property loss.
ØPower supply
caution
warning
3
W
a
r
n
I
n
g
&
C
a
u
t
I
o
n
English
Theses images are just for reference. It can be different from real product appearance
ØPlease plug into correct place
§In case of unstable situation, it causes fire or
electronic shock
ØDon’t touch the Power supply with wet hand
§It causes fire or electronic shock
ØPower supply
warning
Reference

GATEWARE-EM Doalltech
W
a
r
n
I
n
g
&
C
a
u
t
I
o
n
Matters that require attention
ØPlease don’t use a damaged plug or loose outlet
§It causes fire & electronic shock
ØPlease do not use a lot of plugs into one outlet.
§It causes a fire owing to abnormal heat of the
outlet.
warning
W
a
r
n
I
n
g
&
C
a
u
t
I
o
n
English
Theses images are just for reference. It can be different from real product appearance
ØDon’t press the power line with heavy things
and bend forcibly or pull it.
§It causes fire & electronic shock
ØWhen moving the product, please turn down
the switch certainly and then move it after taking
out external cable.
§It causes fire & electronic shock
ØPlease do not use a lot of plugs into one outlet.
§It causes a fire owing to abnormal heat of the
outlet.
4Reference

GATEWARE-EM Doalltech
Matters that require attention W
a
r
n
I
n
g
&
C
a
u
t
I
o
n
ØDon’t make DC Power supply (Adapter) device
wet & keep away from water
§It causes fire & electronic shock
ØDon’t put the Power supply device or Power
supply wire around heater.
§It causes fire
caution
5
W
a
r
n
I
n
g
&
C
a
u
t
I
o
n
English
Theses images are just for reference. It can be different from real product appearance
ØWhen you pull out Power supply plug, please
use only plug which is not wire. It causes wire
problem
§it causes power switch problem or fire
Øwhen Thunderstorm or lightening situation,
please pull out the power supply plug
§It causes electric shock and fire appliances’ a
bnormality.
Reference

GATEWARE-EM Doalltech
S
t
a
r
t
Product summary
1. Summary
lThe entry control management using
RFID card & Finger Vein Pattern.
lReal-time confirmation on the entry situation
lIt stores output data of workers and has transmi
tting function to remote- place server by using
network
2. Feature
lPhotographing, external camera input, image ou
tput, external RFID device input, external RS-232
device input, sensor input and relay output are
available by connecting with various external de
vices.
3. Interlockable External device
lCCTV Camera, TV Monitor
lTurnstile Gate, Automatic door
lCrossing barrier,Eletric sign,Flash light and so on
l13.56Mhz RFID Reader, Finger Vein Reader
6•Product appearance& specification can be changed for high quality improvement
1. Summary
lThe entry control management using
RFID card & Finger Vein Pattern.
lReal-time confirmation on the entry situation
lIt stores output data of workers and has transmi
tting function to remote- place server by using
network
2. Feature
lPhotographing, external camera input, image ou
tput, external RFID device input, external RS-232
device input, sensor input and relay output are
available by connecting with various external de
vices.
3. Interlockable External device
lCCTV Camera, TV Monitor
lTurnstile Gate, Automatic door
lCrossing barrier,Eletric sign,Flash light and so on
l13.56Mhz RFID Reader, Finger Vein Reader
English
Reference

GATEWARE-EM Doalltech
A
d
v
.
p
r
e
p
a
r
a
t
I
o
n
s
1. Composition item check
Gateware FVS Main body Main body holder
Main body Adapter Main body Key
SD Memory USB Memory User Description
A
d
v
.
p
r
e
p
a
r
a
t
I
o
n
s
7•Picture size of each item can be different from real product size,, Some part items
can be changed depending on the situation.
Gateware FVS Main body Main body holder
Main body Adapter Main body Key
SD Memory USB Memory User Description
English
Reference

GATEWARE-EM Doalltech
2. Installation method A
d
v
.
p
r
e
p
a
r
a
t
I
o
n
s
③
②
Holder
Holder
①
8
A
d
v
.
p
r
e
p
a
r
a
t
I
o
n
s
English
Install to fix the holder
EX) In case of installing at gate guard post
① Please confirm the installation position after matching up
per end of the fixing board and eye level of the worker.
② Please install the fixing board to installation position by
using steel plate screw.
③ Hang it by fitting back bolt of the equipment and fixing
hole.
③
Holder
Back of the
Gateware device
Reference

GATEWARE-EM Doalltech
A
d
v
.
p
r
e
p
a
r
a
t
I
o
n
s
3. Each part name & function (Front)
FRONTFRONT
2
1
3
47
5
6
A
d
v
.
p
r
e
p
a
r
a
t
I
o
n
s
9
English
This image is just for reference. So it’ can be different from real situation
Product appearance& specification can be changed for high quality improvement
Each part name
Function
1.Camera
When workers scan the card,it takes a photo
2.FLASH
Flash is working as the Time zone of User setting for card check
3.LCD
Camera view & Product status(Reference to 7page)
4.RFID REGISTER
Card check part for worker attendance
5.Status LED
LED shows depending on the Product status
6.Finger Vein Register
Finger Vein check part for worker attendance
7.KEY PAD
Use Key pad when user set the product setting
47
Reference

GATEWARE-EM Doalltech
3. Each part name & function(Bottom) A
d
v
.
p
r
e
p
a
r
a
t
I
o
n
s
BOTTOMBOTTOM
Each part name
Function
1 2 3 4 5 6 7 8 9
10
A
d
v
.
p
r
e
p
a
r
a
t
I
o
n
s
English
This image is just for reference. So it’ can be different from real situation
Product appearance& specification can be changed for high quality improvement
Each part name
Function
1.ON/OFF
Product ON/OFF button
2.PWR
Connection terminal of Power supply Adapter
3.RESET
Product default setting
4.Screen in/output
terminal
Installation pot of Additional camera
(Reference to 14page)
5.SPEAKER output
terminal
Installation pot of Additional speaker
(Reference to 14page)
6.SERIAL PORT
Installation pot of Additional RFID READER,
Finger Vein Reader.
(Reference to 9, 14page)
7.LAN PORT
Internet connection Pot
8.Signal in/output
terminal
Installation Pot of RELAY,SENSOR
(Reference to 14page)
9.USB PORT
USB connection Pot
Reference

GATEWARE-EM
Doalltech
S
c
r
e
e
n
U
I
Screen UI Explanation
5
6
7
8
1
2
3
① Company name, construction work, type of occupations, name
and information of the card number are marked after card rec
ognitions.
② The resident registration number is showed in case of setting k
eypad input.
③ In case of occurring power supply, network and other errors, th
e contents will be appeared.
–During Menu setting mode, key pad instruction is displayed
④ Current year, month, day, day of the week are displayed
⑤ Current Time is displayed
⑥ USB Memory,SD Card Memory connection status are displayed
⑦ Power supply status is displayed
–Charging quantity and using time will be appeared in case of battery
mode.
English
This image is just for reference. So it’ can be different from real situation
Screen & Menu function can be changed for high quality improvement
8
4
11 Reference

GATEWARE-EM Doalltech
K
e
y
p
a
d
C
o
n
t
r
o
l
Keypad control explanation
Save
K
e
y
p
a
d
C
o
n
t
r
o
l
① MENU This displays button Menu.
② Setting Menu is displayed in the default screen. In t
he Setting menu, please move with the Save button
③ ESC This makes get out of current screen.
④ F1 This makes display Help word expressio
n or move previous screen.
–Usage method is marked at the message windo
w where the Help word is required.
⑤ Move to previous screen in Menu setting screen. Th
e focus moves to flash starting Time when located
at flash end Time.
English
This image is just for reference. So it’ can be different from real situation
Screen & Menu function can be changed for high quality improvement
Save
1
ESC
MENU
F1
(HELP)
3
2
12
Reference

GATEWARE-EM
Doalltech
K
e
y
p
a
d
C
o
n
t
r
o
l
Keypad control explanation
Save
K
e
y
p
a
d
C
o
n
t
r
o
l
① SHIFT This makes the button to next stage.
–The focus moves to the position of flash end Ti
me when locating in flash start Time. .
② DEL This deletes box contents of button text.
–When there is not contents to be deleted on the
IP input text box, this makes movement to previ
ous text.
③ ENT Input the figure of button selection.
–In the Save button, this makes movement to Me
nu selection page after saving data.
–In the list box, select previous item.
English
This image is just for reference. So it’ can be different from real situation
Screen & Menu function can be changed for high quality improvement
Save
1
SHIFT
DEL
ENT
3
2
13 Reference

GATEWARE-EM Doalltech
K
e
y
p
a
d
C
o
n
t
r
o
l
Keypad control explanation
Save
K
e
y
p
a
d
C
o
n
t
r
o
l
① When inputting Keypad 1~0 in Menu setting
text box, you can input
② In main screen, Keypad 2,4 button :
Controlling Volume up & down
③ In main screen, Keypad 4,6 button
Controlling Screen brightness
④ In project Code, Keypad 4,6 button 6
Changing English code.
–Number key 4 Changing English code A to B
–Number key 6 Changing English code A to Z
English
This image is just for reference. So it’ can be different from real situation
Screen & Menu function can be changed for high quality improvement
Save
28
46
4 6
4
6
14
Reference

GATEWARE-EM
Doalltech
E
n
v
i
r
o
n
.
S
e
t
t
i
n
g
1. Menu setting – Enter the Menu
E
n
v
i
r
o
n
.
S
e
t
t
i
n
g
15
① This is Main Screen. Camera image is
displayed
② Push the MENU button
③ Password prompt is displayed
④ After pushing the Password + ENTER ,
you can see the Product setting Menu
This image is just for reference. So it’ can be different from real situation
Screen & Menu function can be changed for high quality improvement
* Password The first password is ‘0000’
MENU
ENT
English
Reference

GATEWARE-EM Doalltech
E
n
v
i
r
o
n
.
S
e
t
t
i
n
g
2. Setting Menu – Selecting item
1. Setting view
2. Default setting
3. Serial Pot setting
4. Relay setting
5. Special setting
ENTER next page
6. LAN setting
7. USB use
8. Time setting
9. password setting
ENTER next page
Menu2
④
②
E
n
v
i
r
o
n
.
S
e
t
t
i
n
g
16
① This is product setting Menu page
② If you push the ENTER button, you can move to next
page
③ This is low Menu of the Product setting
④ If you push the ENTER button, you can move to
next page
⑤ Select the Menu by key pad to move
English
This image is just for reference. So it’ can be different from real situation
Screen & Menu function can be changed for high quality improvement
Menu2
ENT
ENT
④
Reference

GATEWARE-EM
Doalltech
E
n
v
i
r
o
n
.
S
e
t
t
i
n
g
3. Menu setting – Status check
Device Status info, network status info.
Project codeIBDD2008 IP use status DHCP
Attendance IN/OUT IP Address 192.168.1.100
Camera use 1 Channel Default Gateway 192.168.1.1
Pot1 13.56Mhz Subnet Mask 255.255.255.0
Pot2 Not Use DNS 1 168.126.63.1
Pot3 Not Use DNS 2 168.126.63.2
Pot4 Not Use
Relay1 Not Use
Relay2 Not Use
Relay3 Not Use
Relay4 Not Use
Flash start 16
Flash end 09
E
n
v
i
r
o
n
.
S
e
t
t
i
n
g
17
① Current system status is displayed
② If u push the ESC button,
u can return to Menu selection screen
English
This image is just for reference. So it’ can be different from real situation
Screen & Menu function can be changed for high quality improvement
ESC
Reference

GATEWARE-EM Doalltech
E
n
v
i
r
o
n
.
S
e
t
t
i
n
g
4. Menu setting - Default setting
Device Default setting
Project code IBDD2008
Input data in English
Device number 1
Attendance IN/OUT
Camera use 1 Channel
Save
E
n
v
i
r
o
n
.
S
e
t
t
i
n
g
18
① Default setting Screen of the Product
② Enter the project code
–When inputting English in project code,
Move to the project code by using SHIFT button.
ENTER in inputting English.
This button is used after changing 4, 6 key of
alphabet A indication to English figure.
③ Enter the device number
④ Set the IN/OUT setting
⑤ Set the Camera setting
⑥ Push the Save to save setting code
⑦ If u push the ESC button, you can return to Menu
selection Screen
•Project code English input by enter key / setting number by Keypad number
•In case Device number site, If device are 2ea ,please input each 1,2 number
English
ENT
Reference
SHIFT

GATEWARE-EM
Doalltech
E
n
v
i
r
o
n
.
S
e
t
t
i
n
g
5. Menu setting – Serial Pot setting
Serial Pot setting
Pot1 13.56Mhz
Pot2 Not Use
Pot3 Not Use
Pot4 Not Use
Save
E
n
v
i
r
o
n
.
S
e
t
t
i
n
g
19
① This is setting Screen of the RFID Serial Pot
② Set the RFID Serial Pot
③ Pot1 is Internal Pot, Pot2,3,4 are External Pot.
④ Set the Additional RFID TYPE.
⑤ Save the setting
⑥ If u push the ESC you can return to setting Menu
English
This image is just for reference. So it’ can be different from real situation
Screen & Menu function can be changed for high quality improvement
ESC
Reference

GATEWARE-EM Doalltech
E
n
v
i
r
o
n
.
S
e
t
t
i
n
g
6. Menu setting – Relay setting
Relay setting
Relay1 Allow Port 1
Relay2 Deny Port 1,2
Relay3 Not Use
Relay4 Not Use
Save
E
n
v
i
r
o
n
.
S
e
t
t
i
n
g
20
① Relay setting Screen
② After selecting the Allow(registration), Set the Pot
③ After selecting Deny(rejection), Not applied even though set
the Pot
④ Push the save button for saving setting
⑤ If you push the ESC button, you can return to setting
Menu
•Allow è,Enrolling card Data input, Relay works in Serial Pot
•Deny èUnenrolled card Data input, Relay works in Serial Pot,
English
ESC
Reference